1. Effect of Primary Carbides on the Sharpness of Kitchen Knives Made of 8Cr13MoV Steel

   • Qin-tian Zhu
   • Jing Li
   • Cheng-bin Shi

   OriginalPaper 16 July 2019 Pages: 4511 - 4521

   

2. Evolution of the Microstructure and Hardness of Fe-8Cr-2.1Mo-Si-V Die Steel at Different Cooling Rates after Hot Deformation

   • Shuai He
   • Changsheng Li
   • Jinyi Ren

   OriginalPaper 17 July 2019 Pages: 4522 - 4530

   

3. Effect of Homogenization Treatment and Microalloying with Mn on the Microstructure and Hot Workability of AA6060 Aluminum Alloys

   • Xiaoming Qian
   • Nick Parson
   • X.-Grant Chen

   OriginalPaper 25 July 2019 Pages: 4531 - 4542

   

4. Effect of Different Heat Treatments on the Microstructural Evolution and Mechanical Properties of Ni-Cr-Si Alloy Fabricated by Laser Additive Manufacturing

   • Qianfeng Liu
   • Changjun Chen
   • Shunquan Wang

   OriginalPaper 09 August 2019 Pages: 4543 - 4555

   

5. Effect of Heating Rate during Continuous Annealing on Microstructure and Mechanical Properties of High-Strength Dual-Phase Steel

   • Y. G. Deng
   • Y. Li
   • R. D. K. Misra

   OriginalPaper 06 August 2019 Pages: 4556 - 4564

   

6. Effect of Heat Treatment on Microstructure and Mechanical Properties of Extruded Mg-4Zn-1.5Al-2Sn Alloy

   • Bo Wang
   • Xianhua Chen
   • Renju Cheng

   OriginalPaper 12 August 2019 Pages: 4565 - 4573

   

7. Development of NiO-Nanocarbon and MnO₂-Nanocarbon Energetic Catalytic Electrode Materials to Synthesize Electrical Energy through Electrochemical Oxidation of Glucose

   • Subir Paul
   • Amit Paria

   OriginalPaper 18 July 2019 Pages: 4574 - 4581

   

8. Out-of-Phase Thermomechanical Fatigue Behavior of a NiCrAlYSi-Coated Superalloy

   • Hu Xiaoan
   • Zhao Gaole
   • Yang Xiaoguang

   OriginalPaper 12 July 2019 Pages: 4582 - 4592

   

9. Microstructure Evolution of Ultra-Fine-Grained AZ31 B Magnesium Alloy Produced by Submerged Friction Stir Processing

   • Ali Shahnam
   • Fathallah Karimzadeh
   • Seyedeh Narjes Hosseini

   OriginalPaper 15 July 2019 Pages: 4593 - 4601

   

10. Comparison of Experimental Measurements of Thermal Conductivity of Fe₂O₃ Nanofluids Against Standard Theoretical Models and Artificial Neural Network Approach

    • Ravi Agarwal
    • Kamalesh Verma
    • Ramvir Singh

    OriginalPaper 09 July 2019 Pages: 4602 - 4609

    

11. Effect of Rotational Speed on Microstructure and Mechanical Properties in Submerged Friction Stir Welding of ME20M Magnesium Alloy

    • Wenming Liu
    • Yifu Shen
    • Wentao Hou

    OriginalPaper 11 July 2019 Pages: 4610 - 4619

    

12. Structure and Properties of Epoxy/Fly Ash System: Influence of Filler Content and Surface Modification

    • A. Stimoniaris
    • E. Skoura
    • C. Delides

    OriginalPaper 19 July 2019 Pages: 4620 - 4629

    

13. High-Resolution Electron Microscopy and Kinetic Studies of Precipitation Hardening Reactions in Cast Al-5.8Zn-2.2Mg-2.5Cu

    • S. Reza Ghiaasiaan
    • Babak Shalchi Amirkhiz
    • Sumanth Shankar

    OriginalPaper 25 July 2019 Pages: 4630 - 4646

    

14. A Comparative Study on Microstructure, Mechanical and Tribological Properties of A4, AE41, AS41 and AJ41 Magnesium Alloys

    • Huseyin Zengin
    • Yunus Turen
    • Levent Elen

    OriginalPaper 22 July 2019 Pages: 4647 - 4657

    

15. In Situ X-Ray Diffraction Analysis of Face-Centered Cubic Metals Deformed at Room and Cryogenic Temperatures

    • Marcel Tadashi Izumi
    • John Jairo Hoyos Quintero
    • Osvaldo Mitsuyuki Cintho

    OriginalPaper 25 July 2019 Pages: 4658 - 4666

    

16. Characterizing Transformation Phenomena and Elastic Moduli of Austenite and Oriented Martensite of Superelastic Thin NiTi Wire through Isothermal Dynamic Mechanical Analysis

    • Thierry Alonso
    • Denis Favier
    • Grégory Chagnon

    OriginalPaper 25 July 2019 Pages: 4667 - 4679

    

17. Corrosion and Electrochemical Behavior of Sn-2Ag-0.5Cu Lead-Free Solders Solidified with Magnet Stirring

    • A. A. El-Daly
    • K. M. Zohdy
    • M. Ragab

    OriginalPaper 30 July 2019 Pages: 4680 - 4692

    

18. Effect of Microstructure Refinement on Hardness Homogeneity of Aluminum Alloy 1100 Processed by Accumulative Roll Bonding

    • Khaled J. Al-Fadhalah
    • Mohammed K. Alyazidi
    • Mohammed Rafiq

    OriginalPaper 07 August 2019 Pages: 4693 - 4706

    

19. Effect of Eutectic Characteristics on Hot Tearing of Cast Superalloys

    • Z. Zhao
    • J. X. Dong

    OriginalPaper 24 July 2019 Pages: 4707 - 4717

    

20. A Systematic Assessment of Various Stability/Instability Criteria in Predicting the Hot Deformation-Related Instabilities in Super-304H Stainless Steels

    • K. Arun Babu
    • Yahya H. Mozumder
    • Sumantra Mandal

    OriginalPaper 09 August 2019 Pages: 4718 - 4730

    

21. High Strain Rate Response of Cenosphere-Filled Aluminum Alloy Syntactic Foam

    • M. D. Goel
    • Venkitanarayanan Parameswaran
    • D. P. Mondal

    OriginalPaper 01 August 2019 Pages: 4731 - 4739

    

22. Multiaxial High Cycle Fatigue Criteria Based on Fracture Plane Identification: Applicability to Metallic Materials

    • Marcos V. Pereira
    • Fathi A. Darwish
    • Roberta A. Gonçalves

    OriginalPaper 31 July 2019 Pages: 4740 - 4750

    

23. Structural, Adhesion and Electrochemical Characterization of Electroless Plated Ni-P-Carbon Black Composite Films on API 5L X80 Steel

    • Mara Cristina Lopes de Oliveira
    • Olandir Vercino Correa
    • Renato Altobelli Antunes

    OriginalPaper 02 August 2019 Pages: 4751 - 4761

    

24. Interfacial Strength Evaluation of Oxide Films on Carbon Steel by Using the Laser Shock Adhesion Test

    • Yusaku Saito
    • Hiroki Watanabe
    • Akio Yonezu

    OriginalPaper 02 August 2019 Pages: 4762 - 4773

    

25. Interaction Between Ceramic Molds and High-Speed Steel during Gravity and Vacuum Investment Casting

    • Alexander S. Chaus
    • Matej Bračík
    • L’ubomír Čaplovič

    OriginalPaper 07 August 2019 Pages: 4774 - 4789

    

26. Experimental Study on Microstructure and Hardness of Pure Titanium Subjected to Torsion Deformation at Different Temperatures

    • Jie Liu
    • Han Chen

    OriginalPaper 07 August 2019 Pages: 4790 - 4800

    

27. Effect of Y₂O₃ Addition on the Microstructure, Wear Resistance, and Corrosion Behavior of W-4.9Ni-2.1Fe Heavy Alloy

    • Xuehui Zhang
    • Shengjian Zhu
    • Bin Yang

    OriginalPaper 14 August 2019 Pages: 4801 - 4810

    

28. Effect of Stress States on Twinning Behavior in Twinning-Induced Plasticity Steel

    • Joong-Ki Hwang

    OriginalPaper 07 August 2019 Pages: 4811 - 4825

    

29. Effect of Friction Stir Processing on the Microhardness, Wear and Corrosion Behavior of Al6061 and Al6061/SiO₂ Nanocomposites

    • Yousef Mazaheri
    • Akbar Heidarpour
    • Masoud Roknian

    OriginalPaper 12 August 2019 Pages: 4826 - 4837

    

30. Structural, Electrochemical and Hydrogen Sorption Studies of Nanocrystalline Ti-V-Co and Ti-V-Ni-Co Alloys Synthesized by Mechanical Alloying Method

    • M. Balcerzak

    OriginalPaper Open access 12 August 2019 Pages: 4838 - 4844

    

31. Microstructures and Impact Wear Behavior of Al-Alloyed High-Mn Austenitic Cast Steel After Aging Treatment

    • Yifan Feng
    • Renbo Song
    • Renfeng Song

    OriginalPaper 12 August 2019 Pages: 4845 - 4855

    

32. Analysis of Integrated Fuselage Composite Seat for Small Aircraft in Crashworthiness Applications

    • P. Russo
    • M. Guida
    • B. Vitolo

    OriginalPaper 12 April 2019 Pages: 4856 - 4862

    

33. Hot Flow Curve Description of CuFe2 Alloy via Different Artificial Neural Network Approaches

    • Petr Opěla
    • Ivo Schindler
    • Kinga Rodak

    OriginalPaper 09 July 2019 Pages: 4863 - 4870

    

34. Hot Deformation Behavior and Processing Maps of As-Cast Hypoeutectic Al-Si-Mg Alloy

    • Zhenglong Liang
    • Qi Zhang
    • Wei Luo

    OriginalPaper 14 August 2019 Pages: 4871 - 4881

    

35. Strain-Hardening Behavior of Dual-Phase Steel under Multistress States

    • Yongsheng Xu
    • Wenjiao Dan
    • Weigang Zhang

    OriginalPaper 29 July 2019 Pages: 4882 - 4893

    

36. Properties of Equivalent Source Distributions Useful for Inverse Thermal Analysis

    • S. G. Lambrakos

    OriginalPaper 01 August 2019 Pages: 4894 - 4902

    

37. Thermomechanical Analysis of A-TIG and MP-TIG Welding of 2.25Cr-1Mo Steel Considering Phase Transformation

    • A. R. Pavan
    • B. Arivazhagan
    • M. Vasudevan

    OriginalPaper 05 August 2019 Pages: 4903 - 4917

    

38. Molecular Dynamics Simulation Study of Uniaxial Ratcheting Behaviors for Ultrafine-Grained Nanocrystalline Nickel

    • Snehanshu Pal
    • Karanam Gururaj
    • Ravindra Giriraj Bharadwaj

    OriginalPaper 07 August 2019 Pages: 4918 - 4930

    

39. Numerical Investigation of the Effect of Rolling on the Localized Stress and Strain Induction for Wire + Arc Additive Manufactured Structures

    • M. Abbaszadeh
    • J. R. Hönnige
    • B. Klusemann

    OriginalPaper Open access 16 August 2019 Pages: 4931 - 4942

    

40. Investigating Additively Manufactured 17-4 PH for Structural Applications

    • Devin E. Burns
    • Andelle Kudzal
    • Peter A. Parker

    OriginalPaper 11 July 2019 Pages: 4943 - 4951

    

41. Quasi-static and Dynamic Compression of Aluminum Foam at Different Temperatures

    • Xiaolong Liang
    • Hongjie Luo
    • Dong Chi

    OriginalPaper 19 July 2019 Pages: 4952 - 4963

    

42. Effect of Test Temperature and Strain Rate on Dynamic Mechanical Behavior of Aluminum Alloy 2519A

    • Ling-ying Ye
    • Yu Dong
    • Xin-ming Zhang

    OriginalPaper 23 July 2019 Pages: 4964 - 4971

    

43. Corrosion and Tribocorrosion Behavior of Ti-B₄C Composites Joined with TiCuNi Brazing Alloy

    • J. M. Sousa
    • A. C. Alves
    • A. Guedes

    OriginalPaper 20 July 2019 Pages: 4972 - 4982

    

44. Effects of CeO₂ on the Microstructure and Properties of Laser Cladding 316L Coating

    • Zezhou Xu
    • Zhijun He
    • Junwei Zhang

    OriginalPaper 29 July 2019 Pages: 4983 - 4990

    

45. Cyclic Thermal Oxidation Evaluation to Improve Ti6Al4V Surface in Applications as Biomaterial

    • Carolina Aurélia Ribeiro Maestro
    • Alysson Helton Santos Bueno
    • Artur Mariano de Sousa Malafaia

    OriginalPaper 24 July 2019 Pages: 4991 - 4997

    

46. On the Dependence of Durability of Thermal Barrier Coatings on the Oxidation Resistance of Composite Substrate Systems Produced by Diffusing Platinum into Selected Ni-Based Superalloys

    • H. M. Tawancy

    OriginalPaper 23 July 2019 Pages: 4998 - 5008

    

47. A Comparative Study of Deformation Behaviors Between Laser-Welded Joints and Base Metal of Ti-22Al-24.5Nb-0.5Mo Alloy

    • Zhenglong Lei
    • Heng Zhou
    • Bingwei Li

    OriginalPaper 25 July 2019 Pages: 5009 - 5020

    

48. Hot Deformation Behavior of Aluminum Alloys AA7010 and AA7075

    • R. K. Gupta
    • V. Anil Kumar
    • J. Niteshraj

    OriginalPaper 26 July 2019 Pages: 5021 - 5036

    

49. Mechanical and Frictional Performance of Ta and Ta-Ag Alloy Films Deposited at Different Sputtering Powers

    • Jianliang Li
    • Xiafei Zhang
    • Dangsheng Xiong

    OriginalPaper 26 July 2019 Pages: 5037 - 5046

    

50. Hot Corrosion Behavior of Ni20Cr Alloy in NaVO₃ Molten Salt

    • P. D. Silva-Leon
    • O. Sotelo-Mazon
    • L. Martinez-Gomez

    OriginalPaper 29 July 2019 Pages: 5047 - 5062