Abstract
The hot corrosion behavior of Ni20Cr alloy was evaluated in NaVO3 at temperatures of up to 700 °C and compared to Inconel 600. The performance of both the alloys was evaluated using electrochemical measurements, such as potentiodynamic polarization, linear polarization resistance, and electrochemical impedance spectroscopy measurements, as well as a cyclic corrosion test. The results show that the Ni20Cr alloy has better corrosion performance than the Inconel 600. The better performance of the Ni20Cr alloy was due to its ability to develop a stable protector oxide (Cr2O3) on its surface.
Similar content being viewed by others
References
N. Otsuka, Shreir’s Corrosion-Volume 1: Basic Concepts, High Temperature Corrosion, Fireside Corrosion, 4th ed., Academic Press, New York, 2010, p 457–481
I.B. Singh, Corrosion and Sulphate Ion Reduction Studies on Ni and Pt Surfaces in With and Without V2O5 in (Li, Na, K)2SO4 Melt, Corr. Sci., 2003, 45, p 2285–2292
O. Sotelo, C. Cuevas, J. Porcayo, V.M. Salinas, and G. Izquierdo, Corrosion Behavior of Pure Cr, Ni, and Fe Exposed to Molten Salts at High Temperature, Adv. Mater. Sci. Eng., 2014, https://doi.org/10.1155/2014/923271
R.A. Mahesh, R. Jayaganthan, and S. Prakash, Evaluation of Hot Corrosion Behaviour of HVOF Sprayed Ni–5Al and NiCrAl Coatings in Coal Fired Boiler Environment, Surf. Eng., 2010, 26(6), p 413–421
X. Montero and M.C. Galetz, Inhibitors and Coatings Against Vanadate-Containing Oil Ash Corrosion of Boilers, Surf. Coat. Technol., 2016, 304, p 211–221
R.A. Rapp, Hot Corrosion of Materials: A Fluxing Mechanism?, Corr. Sci., 2002, 44, p 209–221
S. Bose, High Temperature Coatings, Chap. 6-Oxidation and Corrosion Resistance Coatings, 2nd ed., Elsevier, New York, 2018, p 97–198, https://doi.org/10.1016/B978-0-12-804622-7.00005-X
T.S. Sidhu, S. Prakash, and R.D. Agrawal, Hot Corrosion and Performance of Nickel-Based Coatings, Corr. Sci., 2006, 90(1), p 41–47
F. Weng, H. Yu, C. Chen, and K. Wan, Influence of Nb and Y on Hot Corrosion Behavior of Ni–Cr-based Superalloys, Mater. Manuf. Processes, 2015, 30, p 677–684
J. Stringer, High-Temperature Corrosion of Superalloys, Mater. Sci. Technol., 1987, 3(7), p 482–493
Y. Longa, Y.S. Zhang, M. Takemoto, and R.A. Rapp, Hot Corrosion of Nickel-Chromium and Nickel-Chromium-Aluminum Thermal-Spray Coatings by Sodium Sulfate-Sodium Metavanadate Salt, Corrosion, 1996, 52(9), p 680–689
J. Porcayo, J.J. Ramos, J. Mayen, E. Porcayo, G.K. Pedraza, J.G. Gonzalez, and L. Martinez, High Temperature Corrosion of Nickel in NaVO3-V2O5 Melts, Adv. Mater. Sci. Eng., 2017, https://doi.org/10.1155/2017/8929873
C.L. Zeng and J. Li, Electrochemical Impedance Studies of Molten (0.9Na, 0.1 K)2SO4-Induced Hot Corrosion of the Ni-Based Superalloy M38G at 900°C in Air, Electrochim. Acta, 2005, 50, p 5533–5538
D. Deb, S.R. Iyer, and V.M. Radhakrishnan, A Comparative Study of Oxidation and Hot Corrosion of a Cast Nickel Base Superalloy in Different Corrosive Environments, Mater. Lett., 1996, 29(1–3), p 19–23
T.S. Sidhu, S. Prakash, and R.D. Agrawal, Evaluation of Hot Corrosion Resistance of HVOF Coatings on a Ni-Based Superalloy in Molten Salt Environment, Mater. Sci. Eng. A, 2006, 430, p 64–78
E.M. Zahrani and A.M. Alfantazi, Molten Salt Induced Corrosion of Inconel 625 Superalloy in PbSO4–Pb3O4–PbCl2–Fe2O3–ZnO Environment, Corr. Sci., 2012, 65, p 340–359
N.S. Flores and C. Cuevas, High-Temperature Corrosion Investigation of the Inconel-600 in Molten Sulfate/Vanadate Mixtures Using Electrochemical Techniques, Int. J. Electrochem. Sci., 2017, 12, p 9882–9895
P.S. Sidky and M.G. Hocking, The Hot Corrosion of Ni-Based Ternary Alloys and Superalloys for Application in Gas Turbines Employing Residual Fuels, Corr. Sci., 1987, 27(5), p 499–530
J. Porcayo, V.M. Salinas, R.A. Rodriguez, and L. Martinez, Effect of the NaVO3-V2O5 Ratio on the High Temperature Corrosion of Chromium, Int. J. Electrochem. Sci., 2015, 10(5), p 4928–4945
C. Cuevas, J. Uruchurtu, J. González, G. Izquierdo, J. Porcayo, and U. Cano, Corrosion Evaluation of Alloy 800 in Sulfate/Vanadate Molten Salts, Corrosion, 2004, 6(6), p 549–560
O. Sotelo, J. Porcayo, C. Cuevas, G. Salinas, J.J. Ramos, E. Vazquez, and L. Martinez, Corrosion Performance of Ni-Based Alloys in Sodium Metavanadate, Int. J. Electrochem. Sci., 2016, 11, p 1868–1882
I. Gurrappa and D.V. Reddy, Characterisation of Titanium Alloy, IMI-834 for Corrosion Resistance Under Different Environmental Conditions, J. Alloys Compd., 2005, 390(1–2), p 270–274
A. Nishikata and S. Haruyama, Electrochemical Monitoring of the Corrosion of Ni, Fe, and Their Alloys in Molten Salts, Corrosion, 1986, 42(10), p 578–584
M. Stern and A.L. Geary, Electrochemical Polarization, J. Electrochem. Soc., 1957, 104(9), p 56–63
K.J.L. Iyer, S.R. Iyer, and V.M. Radhakrishnan, Some Aspects of Hot Corrosion of Superni by Vanadium, Can. Metall. Q., 1987, 26(1), p 53–59
C.H. Lin and J.G. Duh, Electrochemical impedance Spectroscopy (EIS) Study on Corrosion Performance of CrAlSiN Coated Steels in 3.5 wt% NaCl Solution, Surf. Coat. Technol., 2009, 204(6–7), p 784–787
C.L. Zeng, W. Wang, and W.T. Wu, Electrochemical Impedance Models for Molten Salt Corrosion, Corr. Sci., 2001, 43(4), p 787–801
O. Sotelo, J. Porcayo, C. Cuevas, J.J. Ramos, J.A. Ascencio, and L. Martinez, EIS Evaluation of Fe, Cr, and Ni in NaVO3 at 700°C, J. Spectrosc., 2014, https://doi.org/10.1155/2014/949168
T.S. Sidhu, S. Prakash, and R.D. Agrawal, Hot Corrosion Performance of a NiCr Coated Ni-Based Alloy, Scr. Mater., 2006, 55(2), p 179–182
S.P. Jeng, P.H. Holloway, and C.D. Batich, Surface Passivation of Ni/Cr Alloy at Room Temperature, Surf. Sci., 1990, 227(3), p 278–290
H. Ruiz, J. Porcayo, J.E. Garcia, J.M. Alvarado, L. Martinez, L.G. Trapaga, and J. Muñoz, Electrochemical Corrosion of HVOF-Sprayed NiCoCrAlY Coatings in CO2-Saturated Brine, J. Therm. Spray Technol., 2016, 25(7), p 1330–1343
H. Ruiz, J. Porcayo, J.M. Alvarado, A.G. Mora, L. Martinez, L.G. Trápaga, and J. Muñoz, Influence of Oxidation Treatments and Surface Finish on the Electrochemical Behavior of HVOF Ni-20Cr Coatings, J. Mater. Eng. Perform., 2017, https://doi.org/10.1007/s11665-017-3048-1
N. Jegadeeswaran, M.R. Ramesh, and K.U. Bhat, Combating Corrosion Degradation of Turbine Materials Using HVOF Sprayed 25% (Cr3C2-25(Ni20Cr)) + NiCrAlY Coating, Int. J. Corr., 2013, https://doi.org/10.1155/2013/824659
N. Babu, R. Balasubramaniam, and A. Ghosh, High-Temperature Oxidation of Fe3Al-Based Iron Aluminides in Oxygen, Corr. Sci., 2001, 43(12), p 2239–2254
N.K. Mishra, A.K. Rai, S.B. Mishra, and R. Kumar, Hot Corrosion Behaviour of Detonation Gun Sprayed Stellite-6 and Stellite-21 Coating on Boiler Steel SAE 431 at 900 C, J. Corr. Int., 2014, https://doi.org/10.1155/2014/146391
N. Bala, H. Singh, and S. Prakash, High-Temperature Oxidation Studies of Cold Sprayed Ni–20Cr and Ni–50Cr Coatings on SAE 213-T22 Boiler Steel, Appl. Surf. Sci., 2009, 255, p 6862–6869
Y.S. Hwang and R.A. Rapp, Synergistic dissolution of oxides in molten sodium sulfate, J. Electrochem. Soc., 1990, 137(4), p 1276–1280
H. Singh, S. Prakash, D. Puri, and D.M. Phase, Cyclic Oxidation Behavior of Some Plasma-Sprayed Coatings in Na2SO4-60%V2O5 Environment, J. Mater. Eng. Perform., 2006, 15(6), p 729–741
T.S. Sidhu, S. Prakash, and R.D. Agrawal, Characterisations of HVOF Sprayed NiCrBSi Coatings on Ni- and Fe-Based Superalloys and Evaluation of Cyclic Oxidation Behaviour of some Ni-Based Superalloys in Molten Salt Environment, Thin Solid Films, 2006, 515(1), p 95–105
S. Saladi, J.V. Menghani, and S. Prakash, Characterization and Evaluation of Cyclic Hot Corrosion Resistance of Detonation-Gun Sprayed Ni-5Al Coatings on Inconel-718, J. Therm. Spray Technol., 2015, 24(5), p 778–788
S. Kamal, R. Jayaganthan, and S. Prakash, Evaluation of Cyclic Hot Corrosion Behaviour of Detonation Gun Sprayed Cr3C2–25%NiCr Coatings on Nickel- and Iron-Based Superalloys, Surf. Coat. Technol., 2009, 203(8), p 1004–1013
G. Kaushal, H. Singh, and S. Prakash, High Temperature Corrosion Behaviour of HVOF-Sprayed Ni-20Cr Coating on Boiler Steel in Molten Salt Environment at 900°C, Int. J. Surf. Sci. Eng., 2011, 5(5–6), p 415–433
S.S. Chatha, H.S. Sidhu, and B.S. Sidhu, High Temperature Hot Corrosion Behaviour of NiCr and Cr3C2–NiCr Coatings on T91 Boiler Steel in an Aggressive Environment at 750°C, Surf. Coat. Technol., 2012, 206(19–20), p 3839–3850
S. Kamal, R. Jayaganthan, S. Prakash, and S. Kumar, Hot Corrosion Behavior of Detonation Gun Sprayed Cr3C2–NiCr Coatings on Ni and Fe-Based Superalloys in Na2SO4–60% V2O5 Environment at 900°C, J. Alloys Compd., 2008, 463(1–2), p 358–372
F. Guangyan, Q. Zeyan, C. Jingyu, L. Qun, and S. Yong, Hot Corrosion Behavior of Ni-Base Alloys Coated with Salt Film of 75%Na2SO4 + 25%NaCl at 900°C, Rare Met. Mater. Eng., 2015, 44(5), p 1112–1115
T.S. Sidhu, S. Prakash, and R.D. Agrawal, Hot Corrosion Studies of HVOF Sprayed Cr3C2–NiCr and Ni–20Cr Coatings on Nickel-Based Superalloy at 900°C, Surf. Coat. Technol., 2006, 201(3–4), p 792–800
A. Rahmana, V. Chawla, R. Jayaganthana, R. Chandra, and R. Ambardar, Study of Cyclic Hot Corrosion of Nanostructured Cr/Co–Al Coatings on Superalloy, Mater. Chem. Phys., 2011, 126(1–2), p 253–261
T.S. Sidhu, S. Prakash, and R.D. Agrawal, Performance of High-Velocity Oxyfuel-Sprayed Coatings on an Fe-Based Superalloy in Na2SO4-60%V2O5 Environment at 900°C Part II: Hot Corrosion Behavior of the Coatings, J. Mater. Eng. Perform., 2006, 15(1), p 130–138
R.A. Mahesh, R. Jayaganthan, and S. Prakash, A Study on Hot Corrosion Behaviour of Ni–5Al Coatings on Ni- and Fe-Based Superalloys in an Aggressive Environment at 900°C, J. Alloys Compd., 2008, 460(1–2), p 220–231
F. Wang, X. Tian, Q. Li, L. Li, and X. Peng, Oxidation and Hot Corrosion Behavior of Sputtered Nanocrystalline Coating of Superalloy K52, Thin Solid Films, 2008, 516(16), p 5740–5747
N. Arivazhagan, S. Narayanan, S. Singh, S. Prakash, and G.M. Reddy, High Temperature Corrosion Studies on Friction Welded Low Alloy Steel and Stainless Steel in Air and Molten Salt Environment at 650°C, Mater. Des., 2012, 34, p 459–468
J. Porcayo-Calderon, J.G. Gonzalez-Rodriguez, and L. Martinez, Protection of Carbon Steel against Hot Corrosion Using Thermal Spray Si- and Cr-Base Coatings, J. Mater. Eng. Perform., 1998, 7(1), p 79–87
A. Luna, J. Porcayo, G. Salinas, C.D. Arrieta, V.M. Salinas, and L. Martinez, Electrochemical Performance of Fe-Al Intermetallic alloys with Addition of Li, Ni and Ce in NaVO3 at 700 C, Int. J. Electrochem. Sci., 2013, 8(4), p 4641–4653
G. Salinas, J.G. Gonzalez, J. Porcayo, V.M. Salinas, G. Lara, and A. Martinez, Electrochemical Study on Effect of Au, Ag, Pd and Pt on Corrosion Behaviour of Fe3Al in Molten NaCl–KCl, Corros. Eng. Sci. Technol., 2014, 49(5), p 378–385
G. Salinas, J. Porcayo, J.G. Gonzalez, V.M. Salinas, J.A. Ascencio, and L. Martinez, High Temperature Corrosion of Inconel 600 in NaCl-KCl Molten Salts, Adv Mater. Sci Eng, 2014, https://doi.org/10.1155/2014/696081
L. Romo, J.G. Gonzalez, J. Porcayo, R. Guardian, and V.M. Salinas, Study on the Effect of Co, Cr and Ti on the Corrosion of Fe40Al Intermetallic in Molten NaCl-KCl Mixture, Intermetallics, 2015, 67, p 156–165
V. Petley, S. Sathishkumar, K.H.T. Raman, G.M. Rao, and U. Chandrasekhar, Microstructural and Mechanical Characteristics of Ni–Cr thin Films, Mater. Res. Bull., 2015, 66, p 59–64
D. Lou, C. He, S. Shang, C. Liu, and Q. Cai, Microstructure and Performances of Graphite Scattered Cr3C2-NiCr Composites Prepared by Laser Processing, Mater. Lett., 2013, 93, p 304–307
V. Mannava, A. Sambasiva Rao, M. Kamaraj, and R. Sankar Kottada, Influence of Two Different Salt Mixture Combinations of Na2SO4-NaCl-NaVO3 on Hot Corrosion Behavior of Ni-Base Superalloy Nimonic 263 at 800°C, J. Mater. Eng. Perform., 2019, 28(2), p 1077–1093
D. Pradhan, G.S. Mahobia, K. Chattopadhyay, and V. Singh, Severe Hot Corrosion of the Superalloy IN718 in Mixed Salts of Na2SO4 and V2O5 at 700°C, J. Mater. Eng. Perform., 2018, 27(8), p 4235–4243
Acknowledgments
O. Sotelo-Mazon is thankful to the postdoctoral fellowship DGAPA-UNAM. Jose Juan Ramos Hernandez is thanked for the support in the electron microscopy analysis.
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Silva-Leon, P.D., Sotelo-Mazon, O., Salinas-Solano, G. et al. Hot Corrosion Behavior of Ni20Cr Alloy in NaVO3 Molten Salt. J. of Materi Eng and Perform 28, 5047–5062 (2019). https://doi.org/10.1007/s11665-019-04235-4
Received:
Revised:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11665-019-04235-4