1. EDITORIAL 2020: Journal of Thermal Analysis and Calorimetry

   • Imre Miklós Szilágyi
   • Alfréd Kállay-Menyhárd
   • Sophie Korda

   EditorialNotes 03 December 2019 Pages: 1 - 15

   

2. A new implementation of electrochemical impedance spectroscopy (EIS) and other methods to monitor the progress of hydration of strontium monoaluminate (SrAl₂O₄) cement

   • Dominika Madej

   OriginalPaper Open access 07 June 2019 Pages: 17 - 28

   

3. Effect of tantalum contents on transformation temperatures, thermal behaviors and microstructure of CuAlTa HTSMAs

   • E. Ercan
   • F. Dagdelen
   • I. N. Qader

   OriginalPaper 04 June 2019 Pages: 29 - 36

   

4. Experimental study on the new environmental protection chemical composite inhibitor for the inhibition of coal spontaneous combustion

   • Rongkun Pan
   • Junwei Ma
   • Ligang Zheng

   OriginalPaper 07 June 2019 Pages: 37 - 45

   

5. Effects of temperature on performances and hydration process of sulphoaluminate cement-based dual liquid grouting material and its mechanisms

   • Zhang Yaohui
   • Li Tianbin
   • Guoqiang Zhang

   OriginalPaper 10 June 2019 Pages: 47 - 56

   

6. Synthesis of TiO₂ nanofibers by electrospinning using water-soluble Ti-precursor

   • Odhiambo Vincent Otieno
   • Edina Csáki
   • Imre Miklós Szilágyi

   OriginalPaper Open access 29 May 2019 Pages: 57 - 66

   

7. Kinetic study of carbothermal reduction of zirconia under vacuum condition

   • Faramarz Kazemi
   • Farzin Arianpour
   • Hamid Reza Rezaie

   OriginalPaper 29 May 2019 Pages: 67 - 73

   

8. Effect of Bi addition on precipitation and dissolution in Cu–9at% In and Cu–5at% Sb alloys

   • M. Hachouf
   • D. Hamana

   OriginalPaper 12 June 2019 Pages: 75 - 87

   

9. Aloe vera leaf extract-assisted facile green synthesis of amorphous Fe₂O₃ for catalytic thermal decomposition of ammonium perchlorate

   • Parvathy Chandrababu
   • Suchithra Cheriyan
   • Rajeev Raghavan

   OriginalPaper 21 May 2019 Pages: 89 - 99

   

10. Study of the risks of the graphene oxide preparation process by reaction calorimetry

    • Yu Zhou
    • Chuanxin Xie
    • Xinyu Han

    OriginalPaper 28 May 2019 Pages: 101 - 112

    

11. A fractional calculus approach to study mechanical relaxations on hybrid films of Fe₂O₃ nanoparticles and polyvinyl butyral

    • F. Y. Rentería-Baltiérrez
    • M. E. Reyes-Melo
    • V. A. González-González

    OriginalPaper 22 May 2019 Pages: 113 - 124

    

12. Characterization of processing, rheological and dynamic mechanical thermal properties of PVC stabilized with polyphenol-based thermal stabilizer

    • Hussein Ali Shnawa

    OriginalPaper 23 May 2019 Pages: 125 - 135

    

13. Facile preparation of polyethylene glycol/wood-flour composites as form-stable phase change materials for thermal energy storage

    • Liang Jiang
    • Yuan Lei
    • Jingxin Lei

    OriginalPaper 27 May 2019 Pages: 137 - 146

    

14. Effect of MWCNT content on thermal and shape memory properties of epoxy nanocomposites as material for morphing wing skin

    • M. H. Mat Yazik
    • M. T. H. Sultan
    • M. Norkhairunnisa

    OriginalPaper 22 May 2019 Pages: 147 - 158

    

15. Development of knitted vest fabrics for human body thermoregulation

    • Rashid Masood
    • Hafsa Jamshaid
    • Muhammad Anam Khubaib

    OriginalPaper 12 June 2019 Pages: 159 - 167

    

16. Effect of built-in mineral wool insulations durability on its thermal and mechanical performance

    • Balázs Nagy
    • Tamás Károly Simon
    • Rita Nemes

    OriginalPaper Open access 21 May 2019 Pages: 169 - 181

    

17. Significance of homogeneous–heterogeneous reactions in Darcy–Forchheimer three-dimensional rotating flow of carbon nanotubes

    • Tasawar Hayat
    • Arsalan Aziz
    • Ahmed Alsaedi

    OriginalPaper 22 May 2019 Pages: 183 - 195

    

18. Influence of isopropyl tris(dioctylphosphoryloxy) titanate for flame-retardant TPU based on oyster shell powder

    • Xilei Chen
    • Xinyuan Zhang
    • Chuanmei Jiao

    OriginalPaper 29 May 2019 Pages: 197 - 206

    

19. Review on the transition from conventional to multi-component-based nano-high-entropy alloys—NHEAs

    • U. L. Ganesh
    • H. Raghavendra

    ReviewPaper 27 May 2019 Pages: 207 - 216

    

20. Investigation on flower-shaped Ni-doped Fe₃O₄/SnS₂ formation mechanism through a microcalorimetric method and catalytic property as a Fenton-like catalyst

    • Ailing Zhang
    • Zhaodong Nan

    OriginalPaper 07 June 2019 Pages: 217 - 223

    

21. Influence of cerium oxide nanoparticles on thermal conductivity of antifreeze

    • Ali Taghizadeh
    • Mohsen Taghizadeh
    • Masoud Afrand

    OriginalPaper 12 June 2019 Pages: 225 - 236

    

22. Industrial optimization of multi-effect desalination equipment for olefin complex

    • Amir Barza
    • Sadegh Rezaiee Shourije
    • Vahid Pirouzfar

    OriginalPaper 23 May 2019 Pages: 237 - 249

    

23. Combustion of aluminum particles in a high-temperature furnace under various O₂/CO₂/H₂O atmospheres

    • Yunan Zhou
    • Jianzhong Liu
    • Junhu Zhou

    OriginalPaper 29 May 2019 Pages: 251 - 260

    

24. Effects of minerals containing sodium, calcium, and iron on oxy-fuel combustion reactivity and kinetics of Zhundong coal via synthetic coal

    • Chang’an Wang
    • Lin Zhao
    • Defu Che

    OriginalPaper 12 June 2019 Pages: 261 - 271

    

25. Thermal analysis methods to study the reservoir bitumens

    • Yulia M. Ganeeva
    • Tatiana N. Yusupova
    • Ekaterina S. Okhotnikova

    OriginalPaper 03 June 2019 Pages: 273 - 278

    

26. An assessment on the effect of trifluoropropyl-POSS and blend composition on morphological, thermal and thermomechanical properties of PLA/TPU

    • Anoosha Yazdaninia
    • Seyed Hassan Jafari
    • Hossein Ali Khonakdar

    OriginalPaper 04 June 2019 Pages: 279 - 292

    

27. Zirconium phosphate changing hygroscopicity of polyamide-6 in nanocomposites PA-6/ZrP

    • E. E. Garcia
    • D. F. S. Freitas
    • G. A. V. Albitres

    OriginalPaper 29 May 2019 Pages: 293 - 303

    

28. Investigation of melt spinnability of plasticized polylactic acid biocomposites-containing intumescent flame retardant

    • Muhammad Maqsood
    • Fabian Langensiepen
    • Gunnar Seide

    OriginalPaper Open access 29 May 2019 Pages: 305 - 318

    

29. The effect of polymer dispersions on the early hydration of calcium sulfoaluminate cement

    • Lin Li
    • Yu Peng
    • Shaokang Zhang

    OriginalPaper 04 June 2019 Pages: 319 - 331

    

30. New phosphorus- and nitrogen-containing poly(methyl methacrylate)-based copolymer

    • Xingxing Shi
    • Saihua Jiang
    • Liang Xiao

    ReviewPaper 11 June 2019 Pages: 333 - 342

    

31. Synergistic nucleation effect of calcium sulfate whisker and β-nucleating agent dicyclohexyl-terephthalamide in isotactic polypropylene

    • Yue-Fei Zhang
    • Xiang-Feng Lin
    • Bin He

    OriginalPaper 06 June 2019 Pages: 343 - 352

    

32. Influence of microwave irradiation on thermal properties of PVA and PVA/graphene nanocomposites

    • Hafiz Muhammad Afzal
    • Farrukh Shehzad
    • Mamdouh A. Al-Harthi

    OriginalPaper 10 June 2019 Pages: 353 - 365

    

33. Differential thermal analysis of the antibacterial effect of PLA-based materials planned for 3D printing

    • P. Maróti
    • B. Kocsis
    • D. Lőrinczy

    OriginalPaper Open access 21 May 2019 Pages: 367 - 374

    

34. Isothermal calorimetry for monitoring of grape juice fermentation with yeasts immobilized on nylon-6 nanofibrous membranes

    • Ksenia Morozova
    • Mariachiara Armani
    • Matteo Scampicchio

    OriginalPaper 27 May 2019 Pages: 375 - 382

    

35. Predicting the suitability of microwave formulation using microwave differential thermal analysis (MWDTA)

    • Laura J. Waters
    • Shamsuddeen A. Ahmad
    • Gareth M. B. Parkes

    OriginalPaper Open access 27 May 2019 Pages: 383 - 392

    

36. Robustness testing of milling process, analyzing the particle size distribution and crystallinity of the milled samples

    • Csaba Bartos
    • Orsolya Jójárt-Laczkovich
    • Piroska Szabó-Révész

    OriginalPaper Open access 28 May 2019 Pages: 393 - 398

    

37. Spherical and tubular dimyristoylphosphatidylcholine liposomes

    • Elizabeth Uria-Canseco
    • Silvia Perez-Casas

    OriginalPaper 03 June 2019 Pages: 399 - 409

    

38. The optimum position of porous insert for a double-pipe heat exchanger based on entropy generation and thermal analysis

    • Mohsen Akbarzadeh
    • Saman Rashidi
    • Nima Shokri

    OriginalPaper 23 May 2019 Pages: 411 - 426

    

39. Effects of geometry on simulation of two-phase flow in microchannel with density and viscosity contrast

    • Ahmad Reza Ravangard
    • Ladan Momayez
    • Mehdi Rashidi

    OriginalPaper 15 May 2019 Pages: 427 - 440

    

40. Fire hazard evaluation of activated carbons

    • Qingqing Lei
    • Qiyuan Xie
    • Yanwei Ding

    OriginalPaper 10 June 2019 Pages: 441 - 449

    

41. Exergoeconomic analysis and optimization of a transcritical CO₂ power cycle driven by solar energy based on nanofluid with liquefied natural gas as its heat sink

    • Amir Abdollahpour
    • Roghayeh Ghasempour
    • Mohammad H. Ahmadi

    OriginalPaper 23 May 2019 Pages: 451 - 473

    

42. Suitable temperature assignment for liquidus line in SLE investigation by DSC

    • Salim Chelouche
    • Djalal Trache
    • Kamel Khimeche

    OriginalPaper 27 May 2019 Pages: 475 - 487

    

43. Effect of alkali and alkaline earth metals on co-pyrolysis characteristics of municipal solid waste and biomass briquettes

    • Yongling Li
    • Xianjun Xing
    • Lei Huang

    OriginalPaper 27 May 2019 Pages: 489 - 498

    

44. Detection of the temperature coefficients of thermal cells by the electrochemical Peltier heats

    • Zheng Fang
    • Shaofen Wang
    • Zhongfa Yang

    OriginalPaper 22 May 2019 Pages: 499 - 505

    

45. Transient analysis of viscoelastic fluid past a semi-infinite vertical cylinder with respect to the Deborah and Hartmann numbers

    • Mahesh Kumar
    • G. Janardhana Reddy
    • Ravi Ragoju

    OriginalPaper 23 May 2019 Pages: 507 - 517

    

46. Sensitivity analysis of combined cycle parameters on exergy, economic, and environmental of a power plant

    • M. A. Javadi
    • S. Hoseinzadeh
    • A. J. Chamkha

    OriginalPaper 28 May 2019 Pages: 519 - 525

    

47. Thermal analysis of beamline heat load components due to increased power delivery from EAST neutral beam injector

    • Yongjian Xu
    • Ling Yu
    • Ling Tao

    OriginalPaper 22 May 2019 Pages: 527 - 533

    

48. Comparative study of the thermo-catalytic degradation of waste frying and Pachira aquatica Aubl. oil in the presence of Mo/KIT-6

    • Antonio Vicente de Mendonça Júnior
    • Aruzza Mabel de Morais Araújo
    • Amanda Duarte Gondim

    OriginalPaper 03 June 2019 Pages: 535 - 544

    

49. Study of triplet kinetic of thermal decomposition reaction and sensitivity to impact and electrostatic discharge of HMX polymorphs

    • Hamid Reza Pouretedal
    • Sajjad Damiri
    • Alireza Sharifi

    OriginalPaper 03 June 2019 Pages: 545 - 553

    

50. Comparing different reaction models for combustion kinetics of solid recovered fuel

    • Tibor Szűcs
    • Pál Szentannai
    • László Péter Bakos

    OriginalPaper Open access 12 June 2019 Pages: 555 - 565