1. Tailoring molecular structure in the active layer of thin-film composite membrane for extreme pH condition

   • Yang Zhang
   • Ying Guo
   • Yiqun Liu

   Original Paper 01 July 2022 Article: 308

   

2. Determination of inline-particle sizes by turbidity measurement in high solid content emulsion polymerisations

   • Sören Rust
   • Werner Pauer

   Original Paper Open access 01 July 2022 Article: 307

   

3. A novel polyaromatic ring phosphor-nitrogen imidazole derivative endowing epoxy resin with remarkable flame retardancy and mechanical properties

   • Wenhui Luo
   • Dingsi Li
   • Huagui Zhang

   Original Paper 30 June 2022 Article: 306

   

4. Effects of incorporation of silanized titanium nitride on the electrochemical and mechanical properties of polyurethane in aircraft coating

   • Joseph Raj Xavier
   • Jeeva N

   Original Paper 30 June 2022 Article: 305

   

5. Synthesis, optical and dielectric properties of polyacryloyloxy imino fluorophenyl acetamide and polyacryloyloxy imino fluorophenyl acetamide-co-polystyrene sulfonate

   • Rasha A. Baseer
   • Ewies F. Ewies
   • A. M. Ismail

   Original Paper Open access 30 June 2022 Article: 304

   

6. Synthesis and characterization of cationic acrylic resin used in cathodic electrodeposition coatings

   • Zheqing Gong
   • Wanting Zhao
   • Lijun Chen

   Original Paper 29 June 2022 Article: 303

   

7. Properties of silica/natural rubber composite film and foam: Effects of silica content and sulfur vulcanization system

   • Napaporn Kumkrong
   • Peerapan Dittanet
   • Paweena Prapainainar

   Original Paper 27 June 2022 Article: 302

   

8. Activated calcium silicate/natural rubber composites prepared via latex compounding: Static and dynamic mechanical properties

   • Weijiang Wang
   • Yinmin Zhang
   • Junmin Sun

   Original paper 27 June 2022 Article: 301

   

9. Surface free energy study of virgin and recycled carbon fiber reinforced thermoplastic composites

   • Bruno Sena Maia
   • Mohini Sain
   • Jimi Tjong

   Original Paper 27 June 2022 Article: 300

   

10. Polyaniline derivatized anion exchange membrane for acid recovery

    • Rajaram.K. Nagarale
    • Priyanka P. Bavdane
    • A. K. Satpati

    Original Paper 27 June 2022 Article: 299

    

11. Controlled release characteristics of methylenebisacrylamide crosslinked superabsorbent polymer for water and fertilizer conservation in agriculture sector

    • Dhanapal V
    • Subhapriya P
    • Govindaraju K M

    Original Paper 25 June 2022 Article: 298

    

12. Enhanced crystallization property and equilibrious mechanical properties of a novel self-assembly nucleating system based phosphate for polypropylene

    • Zhaopeng Deng
    • Chuangchuang Tong
    • Cheng Shu

    Original paper 25 June 2022 Article: 297

    

13. Comparative experimental and modelling study of the thermal and thermo-mechanical properties of LLDPE/wax blends

    • Mafereka F. T. Mosoabisane
    • Adriaan S. Luyt
    • Cornelia G. C. E. van Sittert

    Original Paper Open access 25 June 2022 Article: 296

    

14. Multiblock copolymers containing poly(butylene succinate) and poly(ε-caprolactone) blocks: Effect of block ratio and length on physical properties and biodegradability

    • Marijana Ponjavic
    • Sanja Jevtic
    • Marija S. Nikolic

    Original Paper 24 June 2022 Article: 295

    

15. Computational analysis on mechanical property reinforcement of nylon 6 polymer and nanofiller dispersion through addition of CNT/Graphene/CNT-Graphene nanofillers

    • Michael R. Roth
    • William A. Pisani
    • Manoj K. Shukla

    Original Paper 23 June 2022 Article: 294

    

16. Polyethylenimine polyampholytes: Synthesis, characterization and dye adsorption study

    • Sulbha Kumari
    • Mohd. Avais
    • Subrata Chattopadhyay

    Original Paper 23 June 2022 Article: 293

    

17. Synthesis, optimization, characterization, and potential drug release application of nanocomposite hydrogel based on carboxymethyl cellulose-g-itaconic acid/acrylamide

    • Golnar Shekari
    • Maryam Kalantari
    • Hassan Hashemipour

    Original Paper 23 June 2022 Article: 292

    

18. Comparative analysis of 3D-printed polylactic acid and acrylonitrile butadiene styrene: Experimental and Materials-Studio-based theoretical studies

    • Dibli B. Otieno
    • Geoffrey O. Bosire
    • Julius M. Mwabora

    Original Paper 23 June 2022 Article: 291

    

19. Harnessing the gene delivery, anti-cancer and antimicrobial potential of polyethylene biguanides and their nanotized forms

    • Santosh Yadav
    • Diksha Jha
    • Pradeep Kumar

    Original Paper 23 June 2022 Article: 290

    

20. Kinetic Study on Thermal Degradation of Crosslinked Polyethylene Cable Waste

    • M. Alshrah
    • I. Adeyemi
    • I. Janajreh

    Original Paper 23 June 2022 Article: 289

    

21. Comb like amphiphilic graft copolymers bearing PDMS and PEO side chains: synthesis and solvent assisted self-assembly behavior

    • K. Sunitha
    • Sankarapillai Mahesh
    • C. P. Reghunadhan Nair

    Original Paper 23 June 2022 Article: 288

    

22. Ternary copolymerization photosensitive polyimide containing flexible group for liquid crystal alignment film

    • Mengyao Li
    • Yuanhao Xu
    • Pei Cheng

    Original Paper 22 June 2022 Article: 287

    

23. Designs of zwitterionic polymers

    • Yung Chang

    Review paper 22 June 2022 Article: 286

    

24. Effect of starch initial moisture on thermoplastic starch film properties and its performance as agricultural mulch film

    • Matías Menossi
    • Florencia Salcedo
    • Leandro N. Ludueña

    Original Paper 21 June 2022 Article: 285

    

25. Time and frequency domain dielectric spectroscopy for in-situ and ex-situ determination of amorphous fractions of isothermally cold-crystallized Polylactic acid

    • Evangelia E. Zavvou
    • Panagiotis C. Tsaousis
    • Christoforos A. Krontiras

    Original Paper 21 June 2022 Article: 284

    

26. The nucleation mechanism of 1-N',3-N'-dibenzoylbenzene-1,4-dicarbohydrazide as a nucleating agent for isotactic polypropylene

    • Hui Zhou
    • Jiao Xiang
    • Yue-Fei Zhang

    Original Paper 20 June 2022 Article: 283

    

27. Fatigue resistance and failure behavior of reaction compatibilized PC/ABS blends under tensile cyclic loading

    • Meng Ma
    • Chencheng Yu
    • Wang Xu

    Original Paper 20 June 2022 Article: 282

    

28. Preparation of PHEMA/TiO₂ nanocomposites by combination of in-situ polymerization/hydrothermal method and determination of their thermal, swelling, biological and dielectric properties

    • İbrahim Erol
    • Sedat Yurdakal
    • Zeki Gürler

    Original Paper 20 June 2022 Article: 281

    

29. The improvement of mechanical properties of repair and construction compositions based on epoxy resin with mineral fillers

    • Sergey Savotchenko
    • Ekaterina Kovaleva
    • Aleksei Cherniakov

    Original Paper 18 June 2022 Article: 280

    

30. Enhanced thermal stability of biobased crosslinked poly (isobornylacrylate-co-2-ethylhexylacrylate) copolymers

    • Dounya Merah
    • Lamia Bedjaoui
    • Ulrich Maschke

    Original Paper 17 June 2022 Article: 279

    

31. Thermoset shape memory polymer with permanent shape reconfigurability based on dynamic disulfide bonds

    • Jingyi Ning
    • Lei Huang
    • Weibo Kong

    Original Paper 17 June 2022 Article: 278

    

32. A novel crosslinked poly(AMPS-co-VA-co-DVB) viscosifier for high temperature water-based drilling muds

    • Haiyang Zhao
    • Yunpeng Geng
    • Qiang Fan

    Original Paper 17 June 2022 Article: 277

    

33. Synthesis of bovine serum albumin-gelatin composite adhesive hydrogels by physical crosslinking

    • Cuiping Guo
    • Zhiwen Zeng
    • Daohuan Lu

    Original Paper 17 June 2022 Article: 276

    

34. Investigation on curing kinetics, water diffusion kinetics and thermo- mechanical properties of functionalized castor oil based epoxy copolymers

    • Sathyaraj Sankar lal
    • Sushanta K. Sahoo
    • Sekar Kannan

    Original Paper 16 June 2022 Article: 275

    

35. α-MoO₃ nanobelts/CMC-PVA nanocomposites: hybrid materials for optoelectronic and dielectric applications

    • A. A. Al-Muntaser
    • Rami Adel Pashameah
    • M. A. Morsi

    Original Paper 16 June 2022 Article: 274

    

36. Glassy structure affected cold-crystallization behavior and structure of poly(lactic acid)

    • Chengbo Zhou
    • Yao Zhang
    • Shichun Jiang

    Original Paper 16 June 2022 Article: 273

    

37. PVDF/BaTiO₃ composite foams with high content of β phase by thermally induced phase separation (TIPS)

    • Aleksandra Bužarovska
    • Mateja Kubin
    • Chiara Gualandi

    Original Paper 15 June 2022 Article: 272

    

38. Experimental research on uniaxial tensile mechanical properties of Kapton foils

    • YAN Liu
    • YANZHEN Liu

    Original Paper 15 June 2022 Article: 271

    

39. Assessing the impact of membrane support and different amine monomer structures on the efficacy of thin-film composite nanofiltration membrane for dye/salt separation

    • Ping-Han Wu
    • Marwin R. Gallardo
    • Kueir-Rarn Lee

    Original Paper 15 June 2022 Article: 270

    

40. Structural, thermal, morphological and antibacterial activities of hybrid bio-nanocomposite Chitosan/Au/Bi₂O₃ for biomedical applications

    • Ahmad El Askary
    • Nasser S. Awwad
    • A. A. Menazea

    Original Paper 13 June 2022 Article: 269

    

41. Influence of microwave power and HDPE blend ratio on thermal and mechanical properties of kenaf reinforced PLLA/HDPE blended composites

    • Manoj Kumar Singh
    • Sunny Zafar
    • Suchart Siengchin

    Short Communication 11 June 2022 Article: 268

    

42. Quaternised chitosan composites with in situ precipitated nano calcium phosphate for making bioactive and degradable tissue engineering scaffolds

    • R. K. Adarsh
    • Eva C. Das
    • Manoj Komath

    Original Paper 10 June 2022 Article: 267

    

43. Synergic effect of PVP and PEG hydrophilic additives on porous polyethersulfone (PES) membranes: preparation, characterization and biocompatibility

    • Athira V. B.
    • Smita Mohanty
    • S. K. Nayak

    Original Paper 10 June 2022 Article: 266

    

44. Retraction Note to: A fluorescent Zn(II)-containing coordination polymer for antibiotic sensing and treatment activity on periodontal tissue inflammation after orthodontics by inhibiting the growth of Porphyromonas gingivalis

    • Shuqiang Niu
    • Qianqian Zhang
    • Fengchun Hou

    Retraction Note 10 June 2022 Article: 265

45. Biocompatible PLA/PCL blends nanocomposites doped with nanographite: Physico-chemical, and thermal behaviour

    • Ibrahim Nazem QADER
    • Mustafa Ersin PEKDEMİR
    • Fethi DAĞDELEN

    Original Paper 10 June 2022 Article: 264

    

46. Polypyrrole-functionalized g-C₃N₄ for rheological, combustion and self-healing properties of thermoplastic polyurethane

    • Shaolin Lu
    • Haixian Shi
    • Xudong Chen

    Original Paper 08 June 2022 Article: 263

    

47. Investigation on the crystallization behavior and detail spherulitic morphology of two crystal forms of thermoplastic polyurethanes

    • Feng Liu
    • Shaojie Li
    • Guangxian Li

    Original Paper 07 June 2022 Article: 262

    

48. Synthesis and characterization of modified cellulose nanofibril organosilica aerogels for the removal of anionic dye

    • Nathan Grishkewich
    • Yingzhan Li
    • Kam Chiu Tam

    Original Paper 06 June 2022 Article: 261

    

49. One-pot multi-component synthesis of five substituted tetrahydropyridine derivatives promoted by a new natural-based biopolymeric catalyst as a green, reusable and eco-friendly heterogeneous catalyst

    • Mohammad Ali Karimi Zarchi
    • Karzem Behboodi
    • Abdolahamid Bamoniri

    Original Paper 06 June 2022 Article: 260

    

50. Recent advances of chitosan-based polymers in biomedical applications and environmental protection

    • Sevda Fatullayeva
    • Dilgam Tagiyev
    • Elmira Aliyeva

    Review Paper 06 June 2022 Article: 259