1. Porous materials: Less is more

   • Paolo Colombo
   • David C. Dunand
   • Vipin Kumar

   OriginalPaper 01 September 2013 Pages: 2187 - 2190

2. Cellular solids studied by x-ray tomography and finite element modeling–a review

   • Clémence Petit
   • Sylvain Meille
   • Eric Maire

   OriginalPaper 01 September 2013 Pages: 2191 - 2201

   

3. Ice-templating, freeze casting: Beyond materials processing

   • Sylvain Deville

   OriginalPaper 01 September 2013 Pages: 2202 - 2219

   

4. Functionalization of open-celled foams by homogeneous slurry based coatings

   • Daniela Boettge
   • Gisela Standke
   • Jörg Adler

   OriginalPaper 01 September 2013 Pages: 2220 - 2233

   

5. Functionalization of carbon-bonded alumina filters through the application of active oxide coatings for steel melt filtration

   • Marcus Emmel
   • Christos G. Aneziris

   OriginalPaper 01 September 2013 Pages: 2234 - 2242

   

6. SiOC ceramics with ordered porosity by 3D-printing of a preceramic polymer

   • Andrea Zocca
   • Cynthia M. Gomes
   • Paolo Colombo

   OriginalPaper 01 September 2013 Pages: 2243 - 2252

   

7. Chemical durability of hierarchically porous silicalite-I membrane substrates in aqueous media

   • Neda Keshavarzi
   • Farid Akhtar
   • Lennart Bergström

   OriginalPaper 01 September 2013 Pages: 2253 - 2259

   

8. Thermal conductivity of porous materials

   • David S. Smith
   • Arnaud Alzina
   • Urs T. Gonzenbach

   OriginalPaper 01 September 2013 Pages: 2260 - 2272

   

9. Hetoroporous heterogeneous ceramics for reusable thermal protection systems

   • Alberto Ortona
   • Claudio Badini
   • Wolfgang Fischer

   OriginalPaper 01 September 2013 Pages: 2273 - 2280

   

10. Mechanical properties of highly porous alumina foams

    • Benedikt Simon Michael Seeber
    • Urs Thomas Gonzenbach
    • Ludwig Julius Gauckler

    OriginalPaper 01 September 2013 Pages: 2281 - 2287

    

11. The influence of the measurement parameters on the crushing strength of reticulated ceramic foams

    • Claudia Voigt
    • Johannes Storm
    • Jana Hubálková

    OriginalPaper 01 September 2013 Pages: 2288 - 2299

    

12. Nano and micro scale analysis of dentin with in vitro and high speed atomic force microscopy

    • Yasemin Kutes
    • Varun Vyas
    • Bryan D. Huey

    OriginalPaper 01 September 2013 Pages: 2300 - 2307

    

13. Impact of high porosity on thermal transport in UO₂ nuclear fuel

    • Di Yun
    • Marius Stan

    OriginalPaper 01 September 2013 Pages: 2308 - 2315

    

14. Seebeck coefficient of graded porous composites

    • Roland H. Tarkhanyan
    • Dimitris G. Niarchos

    OriginalPaper 01 September 2013 Pages: 2316 - 2324

    

15. Adsorption of Ni²⁺ on aminofunctionalized mesoporous silica templated by an anionic surfactant route

    • Shiyou Hao
    • Jie Hou

    OriginalPaper 01 September 2013 Pages: 2325 - 2331

    

16. Effects of surface properties of red mud on interactions with Escherichia coli

    • Wangshu Tong
    • Yihe Zhang
    • Paul K. Chu

    OriginalPaper 01 September 2013 Pages: 2332 - 2338

    

17. Characterization and properties of electrospun thermoplastic polyurethane blend fibers: Effect of solution rheological properties on fiber formation

    • Hao-Yang Mi
    • Xin Jing
    • Xiang-Fang Peng

    OriginalPaper 01 September 2013 Pages: 2339 - 2350

    

18. Homogeneous nanocellular foams from styrenic-acrylic polymer blends

    • Stéphane Costeux
    • Shana P. Bunker
    • Hyun K. Jeon

    OriginalPaper 01 September 2013 Pages: 2351 - 2365

    

19. Production of bulk solid-state PEI nanofoams using supercritical CO₂

    • Brian Aher
    • Nathan M. Olson
    • Vipin Kumar

    OriginalPaper 01 September 2013 Pages: 2366 - 2373

    

20. Effect of intrinsic viscosity on solid-state microcellular foaming of polyethylene terephthalate

    • Huimin Guo
    • Krishna Nadella
    • Vipin Kumar

    OriginalPaper 01 September 2013 Pages: 2374 - 2379

    

21. The effect of polymer hardness, pore size, and porosity on the performance of thermoplastic polyurethane-based chemical mechanical polishing pads

    • Abaneshwar Prasad
    • George Fotou
    • Shoutian Li

    OriginalPaper 01 September 2013 Pages: 2380 - 2393

    

22. Foam extrusion behavior, morphology, and physical foam properties of organic cellulose ester

    • Stefan Zepnik
    • Sven Hendriks
    • Hans-Joachim Radusch

    OriginalPaper 01 September 2013 Pages: 2394 - 2400

    

23. A facile in situ morphological characterization of smart genipin-crosslinked chitosan–poly(vinyl pyrrolidone) hydrogels

    • Glenn A. Hurst
    • Katarina Novakovic

    OriginalPaper 01 September 2013 Pages: 2401 - 2408

    

24. Sound absorption properties of porous composites fabricated by a hydrogel templating technique

    • Marius Rutkevičius
    • Georg H. Mehl
    • Jordan Petkov

    OriginalPaper 01 September 2013 Pages: 2409 - 2414

    

25. Porosity and composition dependence on electrical and piezoresistive properties of thermoplastic polyurethane nanocomposites

    • Reza Rizvi
    • Hani Naguib

    OriginalPaper 01 September 2013 Pages: 2415 - 2425

    

26. Compressive properties of Al-A206/SiC and Mg-AZ91/SiC syntactic foams

    • Gonzalo Alejandro Rocha Rivero
    • Benjamin Franklin Schultz
    • Pradeep Kumar Rohatgi

    OriginalPaper 01 September 2013 Pages: 2426 - 2435

    

27. Suitability of various complex hydrides for foaming aluminum alloys

    • Paul H. Kamm
    • Francisco García-Moreno
    • John Banhart

    OriginalPaper 01 September 2013 Pages: 2436 - 2443

    

28. 3D morphological evolution of porous titanium by x-ray micro- and nano-tomography

    • Yu-chen Karen Chen-Wiegart
    • Takeshi Wada
    • Eric Maire

    OriginalPaper 01 September 2013 Pages: 2444 - 2452

    

29. The effect of oxygen, nitrogen and carbon on the microstructure and compression properties of titanium foams

    • Louis-Philippe Lefebvre
    • Eric Baril
    • Laurent de Camaret

    OriginalPaper 01 September 2013 Pages: 2453 - 2460

    

30. Compressive strength of hollow microlattices: Experimental characterization, modeling, and optimal design

    • Lorenzo Valdevit
    • Scott W. Godfrey
    • William B. Carter

    OriginalPaper 01 September 2013 Pages: 2461 - 2473

    

31. Metal foam regenerators; heat transfer and storage in porous metals

    • Farzad Barari
    • Erardo Mario Elizondo Luna
    • Robert Woolley

    OriginalPaper 01 September 2013 Pages: 2474 - 2482

    

32. Alternative etching methods to expand nanocasting, and use in the synthesis of hierarchically porous nickel oxide, zinc oxide, and copper monoliths

    • Amy J. Grano
    • Franchessa D. Sayler
    • Martin G. Bakker

    OriginalPaper 01 September 2013 Pages: 2483 - 2489

    

33. Production of customized hybrid porous structures by powder metallurgy of Ni₅₉Zr₂₀Ti₁₆Si₂Sn₃ glassy powders

    • Sergio Scudino
    • Jin Young Kim
    • Jürgen Eckert

    OriginalPaper 01 September 2013 Pages: 2490 - 2498

    

34. Stiff, strong zero thermal expansion lattices via the Poisson effect

    • Jeremy Lehman
    • Roderic Lakes

    OriginalPaper 01 September 2013 Pages: 2499 - 2508

    

35. Effects of alumina (Al₂O₃) addition on the cell structure and mechanical properties of 6061 foams

    • Nazim Mahmutyazicioglu
    • Onder Albayrak
    • Sabri Altintas

    OriginalPaper 01 September 2013 Pages: 2509 - 2519

    

36. Enhanced densification of Ti-6Al-4V/TiC powder blends by transformation mismatch plasticity

    • Bing Ye
    • Marc R. Matsen
    • David C. Dunand

    OriginalPaper 01 September 2013 Pages: 2520 - 2527

    

37. Effect of age hardening on compressive deformation behavior of Al-alloy (LM13)–cenosphere hybrid foam prepared using CaCO₃ as a foaming agent

    • Dehi Pada Mondal
    • Nidhi Jha
    • Satyabrata Das

    OriginalPaper 01 September 2013 Pages: 2528 - 2538

    

38. Modeling the effects of pore arrays on the electrical and mechanical properties of copper

    • Carl Slater
    • Martin Strangwood

    OriginalPaper 01 September 2013 Pages: 2539 - 2544

    

39. Heat transfer coefficient of porous copper with homogeneous and hybrid structures in active cooling

    • Zhu Xiao
    • Yuyuan Zhao

    OriginalPaper 01 September 2013 Pages: 2545 - 2553