1. Tool wear condition monitoring method based on relevance vector machine

   • Ruhong Jia
   • Caixu Yue
   • Mingwei Zhao

   Critical Review 05 September 2023 Pages: 4721 - 4734

   

2. Overview of the development of wear in bi-metal band saw blades

   • Jiahao Fu
   • Guoyue Liu
   • Jigang Wu

   Critical Review 08 September 2023 Pages: 4735 - 4748

   

3. An optimization method of processing parameters of multi-pass CNC milling towards energy and carbon emission efficiency

   • Yang Xie
   • Yiqun Dai
   • Chaoyong Zhang

   ORIGINAL ARTICLE 10 August 2023 Pages: 4749 - 4761

   

4. The theoretical model of the effective strain establishment for the plate during the snake rolling

   • Lian-Yun Jiang
   • Ruo-Wen Yang
   • Zhi-Quan Huang

   ORIGINAL ARTICLE 15 August 2023 Pages: 4763 - 4775

   

5. Influence of milling parameters on machining performances and surface quality of ZK61M magnesium alloy

   • Chenguang Wang
   • Chang Chen
   • E. Yang

   ORIGINAL ARTICLE 02 September 2023 Pages: 4777 - 4789

   

6. Experimental investigations on surface topography and scratching performance of silicon nitride ceramics ablated by nanosecond pulsed laser

   • Yan Niu
   • Jingzhu Pang
   • Qingxia Wang

   ORIGINAL ARTICLE 02 September 2023 Pages: 4791 - 4803

   

7. Dynamic velocity planning method for parametric toolpath with mode-based tracking error control

   • Jianxin Xiao
   • Jun Fang
   • Hui Zhang

   ORIGINAL ARTICLE 04 September 2023 Pages: 4805 - 4817

   

8. Computational prediction of surface-tension flow mechanism of molten filler in a V-shaped groove geometry in the brazing process of a heat exchanger

   • Hiroshi Otsuki
   • Jun Ishimoto
   • Yoshikatsu Nakano

   ORIGINAL ARTICLE Open access 04 September 2023 Pages: 4819 - 4842

   

9. Speed function effects on properties of Ti-5Al-5Mo-5 V-1Cr-1Fe alloy manufactured by electron beam melting

   • Marcin Madeja
   • Robert Dziedzic

   ORIGINAL ARTICLE Open access 04 September 2023 Pages: 4843 - 4856

   

10. The microstructure diversity in different areas of the ring-route Al 6061-T6 additive zone by friction stir additive manufacturing

    • Yumeng Zhang
    • Xiaohu Guan
    • Xiaohong Zhan

    ORIGINAL ARTICLE 04 September 2023 Pages: 4857 - 4871

    

11. Effect of additive manufactured hybrid and functionally graded novel designed cellular lattice structures on mechanical and failure properties

    • Sajjad Hussain
    • Aamer Nazir
    • Ozkan Gokcekaya

    ORIGINAL ARTICLE 04 September 2023 Pages: 4873 - 4891

    

12. On the cutting performance and chip characteristics of WNbMoTaZr_0.5 refractory high entropy alloy

    • Haidong Yang
    • Xu Wang
    • Shunhua Chen

    ORIGINAL ARTICLE 04 September 2023 Pages: 4893 - 4912

    

13. Predictive assessment of the ultrasonic shearing quality of AZ31B magnesium alloy sheet based on coupled vibration-thermal model

    • Yue Meng
    • Lifeng Ma
    • Liwei Lu

    ORIGINAL ARTICLE 04 September 2023 Pages: 4913 - 4931

    

14. Multi-objective analysis and optimization of energy aspects during dry and MQL turning of unreinforced polypropylene (PP): an approach based on ANOVA, ANN, MOWCA, and MOALO

    • Amine Hamdi
    • Yusuf Furkan Yapan
    • Hammoudi Abderazek

    ORIGINAL ARTICLE 04 September 2023 Pages: 4933 - 4950

    

15. Comparative study on near-dry wire-cut electrical discharge machining process using moistened wire

    • Wenling Xie
    • Cuixia Guo
    • Jianping Zhang

    ORIGINAL ARTICLE 04 September 2023 Pages: 4951 - 4959

    

16. Plastic deformation mechanism of grinding subsurface of nickel-based single-crystal superalloy

    • Ming Cai
    • Qiang Gong
    • Minghui Chen

    ORIGINAL ARTICLE 04 September 2023 Pages: 4961 - 4979

    

17. Position-dependent FRF identification without force measurement in milling process

    • Barış Altun
    • Hakan Çalışkan
    • Orkun Özşahin

    ORIGINAL ARTICLE 05 September 2023 Pages: 4981 - 4996

    

18. Enhancing ceria slurry performance for shallow trench isolation chemical mechanical polishing through non-ionic surfactant addition

    • Lifei Zhang
    • Lile Xie
    • Xinchun Lu

    ORIGINAL ARTICLE 05 September 2023 Pages: 4997 - 5010

    

19. In-house processing of carbon fiber-reinforced polyetheretherketone (CFR-PEEK) 3D printable filaments and fused filament fabrication-3D printing of CFR-PEEK parts

    • Harsha P. S. Naganaboyina
    • Phaniteja Nagaraju
    • Prabaha Sikder

    ORIGINAL ARTICLE 05 September 2023 Pages: 5011 - 5024

    

20. Artificial intelligence–built analysis framework for the manufacturing sector: performance optimization of wire electric discharge machining system

    • Kashif Ishfaq
    • Muhammad Sana
    • Waqar Muhammad Ashraf

    ORIGINAL ARTICLE Open access 05 September 2023 Pages: 5025 - 5039

    

21. A novel simulation model of three-dimensional surface topography for five-axis CNC milling using bull-nose tool

    • Jieshi Dong
    • Zhiyong Chang
    • Neng Wan

    ORIGINAL ARTICLE 05 September 2023 Pages: 5041 - 5060

    

22. Research on tool diameter and processing width optimization for highly efficient machining of complex surfaces constrained by machining interference surface

    • Pengrui Zhao
    • Zhifeng Liu
    • Dong Li

    ORIGINAL ARTICLE 05 September 2023 Pages: 5061 - 5080

    

23. Research on tool axis vector optimization when face milling complex surfaces

    • Pengrui Zhao
    • Zhifeng Liu
    • Zirui Cao

    ORIGINAL ARTICLE 05 September 2023 Pages: 5081 - 5099

    

24. Planning of cutting tool feed direction for low-damage surface milling of CFRP: considering the changes in the action form of the tool edge on fiber

    • Fuji Wang
    • Lelin Yang
    • Rao Fu

    ORIGINAL ARTICLE 05 September 2023 Pages: 5101 - 5116

    

25. Grain refinement of aluminium welds by Ti, TiB\(_2\), and TiC filler wire inoculation

    • Kjell Martin Kirkbakk
    • Nikolai Marhaug
    • Jens Christofer Werenskiold

    ORIGINAL ARTICLE Open access 05 September 2023 Pages: 5117 - 5127

    

26. Predicting tensile strength of material extrusion parts during the pre-process using neural networks

    • Carsten Schmidt
    • Florian Berchtold
    • Florian Finsterwalder

    ORIGINAL ARTICLE Open access 06 September 2023 Pages: 5129 - 5138

    

27. Statistical model comparison based on variation parameters for monitoring thermal deformation of workpiece in end-milling

    • Mengmeng Yang
    • Feng Zhang
    • Koji Teramoto

    Original Article 06 September 2023 Pages: 5139 - 5152

    

28. Fatigue performance on 7050 aluminum alloy by using ultrasonic vibration-assisted hole expansion strengthening

    • Fei Liu
    • Honghua Su
    • Jiuhua Xu

    ORIGINAL ARTICLE 06 September 2023 Pages: 5153 - 5165

    

29. Pulsed laser ablation of electrically insulated features in thin NiCr films

    • Ningyue Mao
    • Pablo D. Enrique
    • Peng Peng

    ORIGINAL ARTICLE 06 September 2023 Pages: 5167 - 5177

    

30. Modeling and analysis of axial thermal error in machining space of double-swing five-axis machine tool

    • Yupeng Wang
    • Shi Wu
    • Chunfeng Wang

    ORIGINAL ARTICLE 06 September 2023 Pages: 5179 - 5194

    

31. A numerical-experimental coupled method for the identification of model parameters from µ-SPIF test using a finite element updating method

    • Karim Belouettar
    • Sébastien Thibaud
    • Mohamed Karim Harouche

    ORIGINAL ARTICLE 06 September 2023 Pages: 5195 - 5208

    

32. Euler’s equation grinding track, microgrinding mechanism, and process research of space optical crystal materials

    • Jiabin Xu
    • Qiongyi He
    • Feihu Zhang

    ORIGINAL ARTICLE 06 September 2023 Pages: 5209 - 5221

    

33. Evaluation of cutting edge K-form factor in milling of 316L stainless steel: a study based on FEM

    • Dejin Lv
    • Xin Yu
    • Yongguo Wang

    ORIGINAL ARTICLE 06 September 2023 Pages: 5223 - 5236

    

34. Prediction of oscillating parameters of vertical oscillating arc all-position NG-GMAW based on optimized BPNN

    • Hongsheng Liu
    • Ruilei Xue
    • Yang Bao

    ORIGINAL ARTICLE 07 September 2023 Pages: 5237 - 5247

    

35. From CAD to Plug & Produce

    • Anders Nilsson
    • Fredrik Danielsson
    • Bo Svensson

    ORIGINAL ARTICLE Open access 07 September 2023 Pages: 5249 - 5260

    

36. Interelectrode gas–liquid-solid three-phase flow analysis and simulation for drilling holes with high aspect ratio by micro-EDM

    • Peiyao Cao
    • Hao Tong
    • Jialong Chen

    ORIGINAL ARTICLE 07 September 2023 Pages: 5261 - 5276

    

37. Experimental comparison of non-contact and tactile R-Test instruments in dynamic measurement

    • Soichi Ibaraki
    • Koki Onodera
    • Yu-Wei Chang

    ORIGINAL ARTICLE 07 September 2023 Pages: 5277 - 5288

    

38. PLA-based ceramic composites for 3D printing of anthropomorphic simulators

    • Eduardo Thomazi
    • Celso Roman Jr
    • Janete Eunice Zorzi

    ORIGINAL ARTICLE 07 September 2023 Pages: 5289 - 5300

    

39. Modeling bulk modulus of abrasive cloth wheel and polished surface roughness for polishing blade with abrasive cloth wheel

    • Chao Xian
    • Yaoyao Shi
    • De Liu

    ORIGINAL ARTICLE 07 September 2023 Pages: 5301 - 5314

    

40. Research on the dynamic tracking error compensation method of the linear axis of an ultraprecision lathe based on a piezo nanopositioning platform

    • Siyuan Fu
    • Hong Yang
    • Yongbin Zhang

    ORIGINAL ARTICLE 07 September 2023 Pages: 5315 - 5330

    

41. An experimental and numerical coupled method to predict grain refinement and mechanical properties of gradient microstructure material by shot peening

    • Chengyu Wang
    • Yongchao Wang
    • Xuemei Chen

    ORIGINAL ARTICLE 07 September 2023 Pages: 5331 - 5352

    

42. Enhancing productivity and efficiency in conventional laser metal deposition process for Inconel 718 - part I: the effects of the process parameters

    • Simone Maffia
    • Federico Chiappini
    • Barbara Previtali

    ORIGINAL ARTICLE Open access 07 September 2023 Pages: 5353 - 5372

    

43. Numerical modeling investigation of Planar Flow Casting for Fe-6.5wt%Si alloy

    • Yi Mao
    • Dongpo Xuan
    • Cheng Zhou

    ORIGINAL ARTICLE 07 September 2023 Pages: 5373 - 5383

    

44. Numerical investigation of the arc behaviour and air transport during pulsed tungsten inert gas arc-based additive manufacturing

    • Xinxin Wang
    • Shinichi Tashiro
    • Ngoc Quang Trinh

    ORIGINAL ARTICLE 07 September 2023 Pages: 5385 - 5403

    

45. Study of electrical discharge machining of narrow grooves with foil tool electrode

    • Junfei Li
    • Guokang Su
    • Yongjun Zhang

    ORIGINAL ARTICLE 07 September 2023 Pages: 5405 - 5423

    

46. Polishing mechanisms of various surfactants in chemical mechanical polishing relevant to cobalt interconnects

    • Lifei Zhang
    • Shuhui Wang
    • Xinchun Lu

    ORIGINAL ARTICLE 07 September 2023 Pages: 5425 - 5436

    

47. Tribomechanical analysis and machining development for TiSiCN material deposited on industrial steel

    • Erick Hernandez-Renjifo
    • Christian Ortíz
    • Cesar Magén

    ORIGINAL ARTICLE 08 September 2023 Pages: 5437 - 5461

    

48. Research on variable crown work roll curve design for W-shaped profile control of strips

    • Fenjia Wang
    • Chao Liu
    • Qiangguo Zhao

    ORIGINAL ARTICLE 08 September 2023 Pages: 5463 - 5475

    

49. Investigations on process parameters of cluster magnetorheological polishing in a planet motion model

    • Song Chen
    • Tianwu Cai

    ORIGINAL ARTICLE 08 September 2023 Pages: 5477 - 5490

    

50. An overall performance index to quantify dimensional accuracy and mechanical strength of parts manufactured through VAT photopolymerization in biodegradable and non-biodegradable resin

    • Valentina Vendittoli
    • Wilma Polini
    • Michael S. J. Walter

    ORIGINAL ARTICLE 08 September 2023 Pages: 5491 - 5502