Abstract
Single-crystal materials have emerged as a new class of materials widely utilized in the aerospace field. This paper aims to study nickel-based single crystal superalloy DD5, a notoriously challenging material to process. Among the various machining techniques, grinding can achieve superior surface quality with minimal size errors, making it an ideal choice for this experiment. Consequently, this research utilizes the grinding method to investigate the subsurface deformation mechanism of nickel-based single crystal superalloy. To investigate the subsurface plastic damage layer in nickel-based single crystal superalloy, the Hollomon relationship is employed to elaborate on the subsurface plastic deformation mechanism. Furthermore, an effective removal thickness model of a single abrasive grain was established in this study to examine the impact of grinding on the subsurface of nickel-based single crystal superalloy DD5. The model analyzes the influencing factors of subsurface plastic deformation in the grinding process, evaluates the different grinding parameters’ effects on the maximum plastic deformation of subsurface and plastic deformation thickness, and compares the simulation with experimental results. The findings indicate that the subsurface damage of the workpiece is primarily affected by the maximum plastic deformation rate, and the plastic deformation in the workpiece is typically influenced by material properties. Within the experimental parameters, the plastic deformation of nickel-based single crystal superalloy reduces with an increase in wheel speed while subsurface plastic deformation increases with a rise in feed rate and grinding depth. Among other processing parameters, the wheel speed has the most significant effect on subsurface plastic deformation during the grinding process.
Similar content being viewed by others
Data availability
All data and materials used to produce the results in this article can be obtained upon request from the corresponding authors.
Code availability
This is not applicable.
References
Soo SL, Hood R, Aspinwall DK, Voice WE, Sage C (2011) Machinability and surface integrity of RR1000 nickel based superalloy. CIRP Ann Manuf Technol 60(1):89–92. https://doi.org/10.1016/j.cirp.2011.03.094
Song YH, Li YG, Li HY, Zhao GH, Cai ZH, Sun MX (2022) Hot deformation and recrystallization behavior of a new nickel-base superalloy for ultra-supercritical applications. J Mater Res Technol 19:4308–4324. https://doi.org/10.1016/j.jmrt.2022.06.141
Chen XM, Lin YC, Wu F (2017) EBSD study of grain growth behavior and annealing twin evolution after full recrystallization in a nickel-based superalloy. J Alloys Compd 724:198–207 https://doi-org.pratt.80599.net/10.1016/j.jallcom.2017.07.027
Thakur A, Gangopadhyay S (2016) State-of-the-art in surface integrity in machining of nickel-based super alloys. Int J Mach Tools Manuf 100:25–54. https://doi.org/10.1016/j.ijmachtools.2015.10.001
D’Addona DM, Raykar SJ (2019) Thermal modeling of tool temperature distribution during high pressure coolant assisted turning of Inconel 718. Materials (Basel) 12(3):408. https://doi.org/10.3390/ma12030408
Ding WF, Zhu YJ, Zhang LC, Xu JH, Fu YC, Liu WD, Yang CY (2015) Stress characteristics and fracture wear of brazed CBN grains in monolayer grinding wheels. Wear 332:800–809. https://doi.org/10.1016/j.wear.2014.12.008
Xu YC, Gong YD, Zhang WJ, Wen XL, Yin GQ, Li JG, Zhao JB (2022) Microstructure evolution and dynamic recrystallization mechanism induced by grinding of Ni-based single crystal superalloy. J Mater Process Technol 310:117784. https://doi.org/10.1016/j.jmatprotec.2022.117784
Qu SS, Yao P, Gong YD, Chu DK, Yang YY, Li CW, Wang ZL, Zhang XP, Hou Y (2022) Environmentally friendly grinding of C/SiCs using carbon nanofluid minimum quantity lubrication technology. J Clean Prod 366:132898. https://doi.org/10.1016/j.jclepro.2022.132898
Liang CY, Gong YD, Qu SS, Yang YY, Zhang H, Sun Y, Zhao JB (2022) Performance of grinding nickel-based single crystal superalloy: effect of crystallographic orientations and cooling-lubrication modes. Wear 508-509:204453. https://doi.org/10.1016/j.wear.2022.204453
Cheng TW, Wang Y, Zhao YX, Lv LX, Hu Q, Ma DX (2022) Effect of remelting solution heat treatment on microstructure evolution of nickel-based single crystal superalloy DD5. Mater Charact 192:112186. https://doi.org/10.1016/j.matchar.2022.112186
Li T, Shi HT, Bai XT, Zhang K (2023) A fault diagnosis method based on stiffness evaluation model for full ceramic ball bearings containing subsurface cracks. Eng Fail Anal 148:107213. https://doi.org/10.1016/j.engfailanal.2023.107213
Du SG, Jiang Z, Zhang DH, Wang ZB, Li N (2015) Microstructure of plastic deformation layer on grinding surface of GH4169 alloy. J Mech Eng 51(12):63–68. https://doi.org/10.3901/JME.2015.12.063
Ulutan D, Ozel T (2011) Machining induced surface integrity in titanium and nickel alloys: a review. Int J Mach Tool Manuf 51(3):250–280. https://doi.org/10.1016/j.ijmachtools.2010.11.003
Yin GQ, Gong YD, Li YW, Song JL, Zhou YG (2019) Modeling and evaluation in grinding of SiCp/Al composites with single diamond grain. Int J Mech Sci 165:105137. https://doi.org/10.1016/j.ijmecsci.2019.105137
Wang C, Yan XF, Liao HZ, Chai LJ, Zou L, Huang Y (2021) Process parameter optimization and anisotropy sensitivity study for abrasive belt grinding of nickel-based single-crystal superalloy. Arch Civ Mech Eng 21:170. https://doi.org/10.1007/s43452-021-00318-z
Silva RBD, Lima MLS, Perera MF, Abrao BS, Silva LRRD, Bianchi EC, Machado AR (2018) A surface and sub-surface quality evaluation of three cast iron grades after grinding under various cutting conditions. Int J Adv Manuf Technol 99(5–8):1839–1852. https://doi.org/10.1007/s00170-018-2628-z
Wasmer K, Parlinska-Wojtan M, Gassilloud R, Pouvreau C, Tharian J, Micher J (2007) Plastic deformation modes of gallium arsenide in nanoindentation and nanoscratching. Appl Phys Lett 90:031902. https://doi.org/10.1063/1.2431763
Li J, Fang QH, Zhang LC, Liu YW (2014) Subsurface damage mechanism of high speed grinding process in single crystal silicon revealed by atomistic simulations. Appl Surf Sci 324:464–474. https://doi.org/10.1016/j.apsusc.2014.10.149
Zhao JY, Fu YC, Xu JH, Tian L, Yang L (2013) Forces and chip morphology of nickel-based superalloy inconel 718 during high speed grinding with single grain. Key Eng Mater 589-590:209–214. https://doi.org/10.4028/www.scientific.net/KEM.589-590.209
Miao Q, Ding WF, Xu JH, Cao LJ, Wang HC, Yin Z, Dai CW, Kuang WJ (2021) Creep feed grinding induced gradient microstructures in the superficial layer of turbine blade root of single crystal nickel-based superalloy. Int J Extreme Manuf 3:045102. https://doi.org/10.1088/2631-7990/ac1e05
Miao Q, Ding WF, Kuang WJ, Yang CY (2021) Grinding force and surface quality in creep feed profile grinding of turbine blade root of nickel-based superalloy with microcrystalline alumina abrasive wheels. Chin J Aeronaut 34(2):576–585. https://doi.org/10.1016/j.cja.2019.11.006
Zhang YB, Li CH, Jia DZ, Zhang DK, Zhang XW (2015) Experimental evaluation of MoS2 nano-particles in jet MQL grinding with different types of vegetable oil as Base oil. J Clean Prod 87(1):930–940. https://doi.org/10.1016/j.jclepro.2014.10.027
Zhang YB, Li CH, Jia DZ, Zhang DK, Zhang XW (2015) Experimental evaluation of the lubrication performance of MoS2/CNT nanofluid for minimal quantity lubrication in Ni-based alloy grinding. Int J Mach Tools Manuf 99:19–33. https://doi.org/10.1016/j.ijmachtools.2015.09.003
Hadad MJ, Tawakoli T, Sadeghi MH, Sadeghi B (2012) Temperature and energy partition in minimum quantity lubrication-MQL grinding process. Int J Mach Tools Manuf 54:10–17. https://doi.org/10.1016/j.ijmachtools.2011.11.010
Hadad MJ, Sadeghi B (2012) Thermal analysis of minimum quantity lubrication-MQL grinding process. Int J Mach Tools Manuf 63:1–15. https://doi.org/10.1016/j.ijmachtools.2012.07.003
Malkin S, Hwang TW (1996) Grinding mechanisms for ceramics. CIRP AnnManuf Techn. 45(2):569–580. https://doi.org/10.1016/S0007-8506(07)60511-3
Hu C, Zhuang KJ, Weng J, Zhang XM (2019) Thermal-mechanical model for cutting with negative rake angle based on a modified slip-line field approach. Int J Mech Sci 164:105167. https://doi.org/10.1016/j.ijmecsci.2019.105167
Tang JY, Du J, Chen YP (2009) Modeling and experimental study of grinding forces insurface grinding. J Mater Process Technol. 209(6):2847–2854. https://doi.org/10.1016/j.jmatprotec.2008.06.036
Durgumahanti USP, Singh V, Rao PV (2010) A new model for grinding force prediction and analysis. Int J Mach Tools Manuf. 50(3):231–240. https://doi.org/10.1016/j.ijmachtools.2009.12.004
Chang HC, Wang JJJ (2008) A stochastic grinding force model considering random grit distribution. Int J Mach Tools Manuf 48(12):1335–1344. https://doi.org/10.1016/j.ijmachtools.2008.05.012
Zhang YB, Li CH, Ji HJ, Yang XH, Yang M, Jia DZ, Zhang XP, Li RZ, Wang J (2017) Analysis of grinding mechanics and improved predictive force model based on material-removal and plastic-stacking mechanisms. Int J Mach Tools Manuf 122:81–97. https://doi.org/10.1016/j.ijmachtools.2017.06.002
Yang M, Li CH, Zhang YB, Jia DZ, Li R, Hou YL, Cao HJ, Wang J (2019) Predictive model for minimum chip thickness and size effect in single diamond grain grinding of zirconia ceramics under different lubricating conditions. Ceram Int 45(12):14908–14920. https://doi.org/10.1016/j.ceramint.2019.04.226
Liu MZ, Li CH, Zhang YB, Yang M, Gao T, Cui X, Wang XM, Xu WH, Zhou ZM, Liu B, Said Z, Li R, Sharma S (2022) Analysis of grinding mechanics and improved grinding force model based on randomized grain geometric characteristics. Chinese J Aeronaut 36(7):160–193. https://doi.org/10.1016/j.cja.2022.11.005
Rowe WB, Jin T (2001) Temperatures in high efficiency deep grinding (HEDG). CIRP AnnManuf Techn 50(1):205–208. https://doi.org/10.1016/S0007-8506(07)62105-2
Zhang PF, Zhang WL, Yuan YJ, Fan XQ, Zhu MH (2020) Probing the effect of grinding-heat on material removal mechanism of rail grinding. Tribol Int 147:105942. https://doi.org/10.1016/j.triboint.2019.105942
Yi J, Deng ZH, Zhou W, Li SJ (2020) Numerical modeling of transient temperature and stress in WC-10Co4Cr coating during high-speed grinding. Int J Precis Eng Man 21(4):585–598. https://doi.org/10.1007/s12541-019-00285-9
Narayan A, Yadava V (2012) Investigation of temperature distribution in the workpiece during creep feed surface grinding using finite element method. Mater Manuf Process 27(10):1101–1109. https://doi.org/10.1080/10426914.2011.654154
Zhang H, Gong YD, Liang CY, Sun Y, Zhao JB, He ZF (2023) Effect of thermal exposure on subsurface microstructure evolution of nickel-based single crystal superalloy DD5 after milling. J Manuf Process 97:210–219. https://doi.org/10.1016/j.jmapro.2023.05.010
Dai CW, Ding WF, Zhu YJ, Xu JH, Yu HW (2018) Grinding temperature and power consumption in high speed grinding of Inconel 718 nickel-based superalloy with a vitrified CBN wheel. Precis Eng 52:192–200. https://doi.org/10.1016/j.precisioneng.2017.12.005
Shi XL, Niu L, Yang GL, Wang HC, Jin ZJ (2023) Surface modification of nickel-based superalloy by electrochemical selective dissolution. J Alloys Compd 947:169628. https://doi.org/10.1016/j.jallcom.2023.169628
Gao S, Wang HX, Huang H, Kang RK (2023) Molecular simulation of the plastic deformation and crack formation in single grit grinding of 4H-SiC single crystal. Int J Mech Sci 247:108147. https://doi.org/10.1016/j.ijmecsci.2023.108147
Xu YC, Gong YD, Zhang WJ, Wen XL, Xin B, Zhang H (2022) Effect of grinding conditions on the friction and wear performance of Ni-based singlecrystal superalloy. Arch Civ Mech Eng 22:102. https://doi.org/10.1007/s43452-022-00423-7
Ding WF, Miao Q, Li BK, Xu JH (2019) Review on grinding technology of nickel-based superalloys used for aero-engine. J Mech Eng. 55(1):189–215. https://doi.org/10.3901/JME.2019.01.189
Zhao GL, Liu SZ, Zhang C, Jin L, Yang QX (2022) Ultrasonic nonlinear parameter based on Hollomon hardening model. Vacuum 197:110841. https://doi.org/10.1016/j.vacuum.2021.110841
Cai M, Zhu T, Gao XJ, Yan YF, Yu N, Zeng L (2022) Study on machining performance in grinding of Ni-base single crystal superalloy DD5. Int J Adv Manuf Technol 120:7657–7671. https://doi.org/10.1007/s00170-022-09256-3
Meng FN, Zhang ZY, Feng JJ, Gu QM, Wu B, Wang JM (2022) A study investigating the cutting mechanism of compacted graphite iron based on a novel microstructure of finite element model. J Manuf Process 81:250–256. https://doi.org/10.1016/j.jmapro.2022.06.065
Li SW, Li JL, Shi JM, Peng Y, Peng X, Sun XJ, Jin F, Xiong JT, Zhang FS (2022) Microstructure and mechanical properties of transient liquid phase bonding DD5 single-crystal superalloy to CrCoNi-based medium-entropy alloy. J Mater Sci Technol 96:140–150. https://doi.org/10.1016/j.jmst.2021.04.024
Ding WF, Xu JH, Chen ZZ, Su HH, Fu YC (2010) Grindability and surface integrity of cast nickel-based superalloy in creep feed grinding with brazed CBN abrasive wheels. Chinese J Aeronaut 23(4):501–510. https://doi.org/10.1016/S1000-9361(09)60247-8
Yang X, Qiu ZJ, Lu C, Li X, Tang JJ (2017) Modelling the strain rate sensitivity on the subsurface damages of scratched glass ceramics. Ceram Int. 43(15):12930–12938. https://doi.org/10.1016/j.ceramint.2017.06.191
Rinaldi S, Umbrello D, Melkote SN (2021) Modelling the effects of twinning and dislocation induced strengthening in orthogonal micro and macro cutting of commercially pure titanium. Int J Mech Sci 190:106045. https://doi.org/10.1016/j.ijmecsci.2020.106045
Li FD, Liu ZY, Wu WT, Zhao Q, Zhou Y, Bai S, Wang XH, Fan GH (2016) Slip band formation in plastic deformation zone at crack tip in fatigue stage II of 2xxx aluminum alloys. Int J Fatigue 91:68–78. https://doi.org/10.1016/j.ijfatigue.2016.05.014
Funding
This work was supported by the National Natural Science Foundation of China (no. U1908230), the Natural Science Foundation of Liaoning Province (no. 2023-BS-185), the Science and Technology Research Project of the Educational Department of Liaoning Province (no. LJKZ0384), and the Talent Scientific Research Fund of LNPU (no. 2021XJJL-007).
Author information
Authors and Affiliations
Contributions
Ming Cai: writing—original draft, software, investigation, visualization, and funding. Qiang Gong: writing—original draft, conceptualization, and visualization. Xingjun Gao: software, investigation, methodology, and funding. Yadong Gong: supervision, investigation, methodology, and funding. Minglei Zhang: data curation and formal analysis. Tao Zhu: data curation and formal analysis. Minghui Chen: data curation and formal analysis.
Corresponding author
Ethics declarations
Ethical approval
The authors declare that there is no ethical issue applied to this article.
Consent to participate
The authors declare that all authors have read and approved to submit this manuscript to IJAMT.
Consent to publish
The authors declare that all authors agree to sign the transfer of copyright for the publisher to publish this article upon on acceptance.
Competing interests
The authors declare no competing interests.
Additional information
Publisher’s note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Cai, M., Gong, Q., Gao, X. et al. Plastic deformation mechanism of grinding subsurface of nickel-based single-crystal superalloy. Int J Adv Manuf Technol 128, 4961–4979 (2023). https://doi.org/10.1007/s00170-023-12240-0
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-023-12240-0