1. Characteristics of Metal Specimens Formed by Selective Laser Melting: A State-of-the-Art Review

   • Dongju Chen
   • Peng Wang
   • You Zhao

   ReviewPaper 30 November 2020 Pages: 7073 - 7100

   

2. A Review on the Effect of Impact Toughness and Fracture Toughness on Impact-Abrasion Wear

   • O. A. Zambrano

   ReviewPaper 28 June 2021 Pages: 7101 - 7116

   

3. Investigation of the Addition of (NaPO₃)₆ to Al₂O₃ Ceramic Coatings Prepared on AlSi10Mg Selective Laser Melted Components via Micro-Arc Oxidation

   • Yupeng Guo
   • Xinyi Yuan
   • Shenghao Zhang

   OriginalPaper 09 August 2021 Pages: 7117 - 7127

   

4. Effects of Dynamic Loading under Extreme Conditions on Wear Resistance of T105Mn120 Castings for Railway Safety Systems

   • V. Bulbuc
   • V. Paleu
   • L. G. Bujoreanu

   OriginalPaper 27 July 2021 Pages: 7128 - 7137

   

5. Influence of the Heat Input on the Dendritic Solidification Structure and the Mechanical Properties of 2.25Cr-1Mo-0.25V Submerged-Arc Weld Metal

   • Hannah Schönmaier
   • Ronny Krein
   • Ronald Schnitzer

   OriginalPaper Open access 14 June 2021 Pages: 7138 - 7151

   

6. Effects of Carbon Source on Ablation Property of C/C–ZrC–SiC Composites and SiC Coating under Plasma Flame

   • Yuanqi Weng
   • Jun Li
   • Qizhong Huang

   OriginalPaper 27 May 2021 Pages: 7152 - 7162

   

7. Stress Corrosion Cracking Susceptibility of 304 Stainless Steel Subjected to Laser Shock Peening without Coating

   • Zhiming Lu
   • Fan Xu
   • Jianfeng Mao

   OriginalPaper 15 June 2021 Pages: 7163 - 7170

   

8. An Investigation into the Fracture Behavior of the IN625 Hot-Rolled Superalloy

   • B. Salehnasab
   • D. Zarifpour
   • G. Samimi

   OriginalPaper 24 May 2021 Pages: 7171 - 7184

   

9. Influence of Solution Heat Treatment on Microstructure and Mechanical Properties of a Hot-Rolled 2205 Duplex Stainless Steel

   • Oluwasegun Eso Falodun
   • Edwin Bonginkosi Mtsweni
   • Peter Apata Olubambi

   OriginalPaper 01 June 2021 Pages: 7185 - 7194

   

10. Comparison of the Resistance to Cavitation Erosion and Slurry Erosion of Four Kinds of Surface Modification on 13-4 Ca6NM Hydro-Machinery Steel

    • C. V. Roa
    • J. A. Valdes
    • J. J. Coronado

    OriginalPaper 04 June 2021 Pages: 7195 - 7212

    

11. Correction to: Comparison of the Resistance to Cavitation Erosion and Slurry Erosion of Four Kinds of Surface Modification on 13-4 Ca6NM Hydro-Machinery Steel

    • C. V. Roa
    • J. A. Valdes
    • J. J. Coronado

    Correction 22 June 2021 Pages: 7213 - 7213

12. In Vitro Study on Cytocompatibility of Mg Wire/Poly(Lactic Acid) Composite Rods

    • Hong Cai
    • Xuan Li
    • Xiaobo Zhang

    OriginalPaper 01 June 2021 Pages: 7214 - 7222

    

13. Microstructure and Magnetron Sputtering Properties of W/Re Alloy Targets Fabricated by Vacuum Sintering

    • Y. M. Wang
    • Q. H. Tang
    • P. Zhou

    OriginalPaper 02 June 2021 Pages: 7223 - 7235

    

14. Cold-Plasma-Sterilized Nanostructured Ti6Al4V: Effect on Nanostructured Surface Morphology and Osteogenic Differentiation of Bone-Marrow-Derived Mesenchymal Stem Cells

    • Leonardo Marasca Antonini
    • Antonio Shigueaki Takimi
    • Célia de Fraga Malfatti

    OriginalPaper 03 June 2021 Pages: 7236 - 7246

    

15. Investigations of Fatigue and Fracture Behavior of AA 7085

    • Rathin Maity
    • Akhilendra Singh
    • Surajit Kumar Paul

    OriginalPaper 15 June 2021 Pages: 7247 - 7258

    

16. Research on Hot Deformation Behavior of As-Forged TC17 Titanium Alloy

    • Jun Cai
    • Min Guo
    • Wen Wang

    OriginalPaper 14 June 2021 Pages: 7259 - 7274

    

17. Corrosion of Electrodeposited Ni Coatings of Agricultural Machinery by Farming Fertilizers

    • Wenwu Yang
    • Zhanhao Liang
    • Congquan Gong

    OriginalPaper 02 June 2021 Pages: 7275 - 7282

    

18. Effect of Cryogenic Heat Treatment on Phase Formation in Co₃₈Ni₃₇Al₁₇Si₆Sb₂ Ferromagnetic Shape Memory Alloy

    • Murat Eskil
    • Zeynep Aylin Sahan

    OriginalPaper 01 June 2021 Pages: 7283 - 7294

    

19. Effect of In Situ Reaction Temperature on the Microstructure and Mechanical Properties of 3 wt.% ZrB₂/A356

    • Hui Li
    • Lei Jiao
    • Yuanpeng Qiao

    OriginalPaper 17 June 2021 Pages: 7295 - 7305

    

20. Characterization of Microstructure and Microtexture in a Cold-Rolled and Intercritically Annealed Dual-Phase Steel

    • H. Ashrafi
    • M. Shamanian
    • J. A. Szpunar

    OriginalPaper 09 June 2021 Pages: 7306 - 7313

    

21. Improvement of Corrosion and Wear Resistance of Ni-W Coatings by Embedding Graphene Oxide Modified by Nano-Al₂O₃

    • Zhang Guosong
    • Cui Hongzhi
    • Su Chunjian

    OriginalPaper 14 June 2021 Pages: 7314 - 7327

    

22. Characterization and Mechanical Analysis of Functionally Graded Al-Si₃N₄ Composites through Centrifugal Process

    • R. Ambigai
    • S. Prabhu

    OriginalPaper 16 June 2021 Pages: 7328 - 7342

    

23. Studies on the Surface and Wetting Properties of Poly(vinylidene fluoride)/Poly(acrylonitrile)/Multiwalled Carbon Nanotube-NH₂ Blends as a Function of Air Plasma Treatment

    • E. Dhanumalayan
    • Girish M. Joshi
    • R. R. Deshmukh

    OriginalPaper 27 May 2021 Pages: 7343 - 7353

    

24. Effect of Surface Roughness Induced by Milling Operation on the Corrosion Behavior of Magnesium Alloys

    • Uttam Reddy
    • Dhananjay Dubey
    • Sudhanshu S. Singh

    OriginalPaper 01 June 2021 Pages: 7354 - 7364

    

25. Boron-Doped Hydroxyapatite Coatings on NiTi Alloys Using the Electrophoretic Deposition Method: Enhanced Corrosion and Adhesion Performances

    • M. E. Aksoy
    • B. Aksakal
    • B. Dikici

    OriginalPaper 17 June 2021 Pages: 7365 - 7375

    

26. On the Characteristic Features of Dislocations during Ratcheting–Creep Interaction

    • Krishna Dutta
    • Srimant Kumar Mishra
    • Chinnam Sivateja

    OriginalPaper 07 June 2021 Pages: 7376 - 7385

    

27. Effect of Interfacial Microstructure on Mechanical Properties of Cold Pressure-Welded Al-Cu Joints Subjected to Annealing

    • Satoru Nishikawa
    • Takara Arayashiki
    • Takenobu Hongo

    OriginalPaper 16 June 2021 Pages: 7386 - 7396

    

28. Shear Localization Influences on Assessment of Deformation Behaviors of Pure Iron in Impact Loading Process

    • Guosheng Su
    • Yi Liu
    • Xuehui Shen

    OriginalPaper 02 June 2021 Pages: 7397 - 7405

    

29. Investigation of Microstructure and Fracture Mechanism of Al-5.0Mg Alloys Fabricated by Wire Arc Additive Manufacturing

    • Yanfei Geng
    • Irina Panchenko
    • Sergey Konovalov

    OriginalPaper 15 June 2021 Pages: 7406 - 7416

    

30. Dissimilar Laser Beam Welding of AISI 420 Martensitic Stainless Steel to AISI 2205 Duplex Stainless Steel: Effect of Post-Weld Heat Treatment on Microstructure and Mechanical Properties

    • Ceyhun Köse

    OriginalPaper 11 August 2021 Pages: 7417 - 7448

    

31. Constitutive Model Parameter Identification for 6063 Aluminum Alloy Using Inverse Analysis Method for Extrusion Applications

    • Liang Xu
    • Zaiqi Yao
    • Luoxing Li

    OriginalPaper 21 June 2021 Pages: 7449 - 7460

    

32. Research on Microstructure and Fatigue Properties of 7050-T6 High-Strength Aluminum Alloy Cold Metal Transfer Welded Joint

    • Minqi Zhu
    • Shanglei Yang
    • Cong Fan

    OriginalPaper 24 May 2021 Pages: 7461 - 7471

    

33. Arc Additively Manufactured 5356 Aluminum Alloy with Cable-Type Welding Wire: Microstructure and Mechanical Properties

    • Jiankun Wang
    • Qingkai Shen
    • Xizhang Chen

    OriginalPaper 27 May 2021 Pages: 7472 - 7478

    

34. The Significant Impact of the Characteristics of Granular Structure and Granular Bainite on the Mechanisms Contributing to Strength–Ductility Combination

    • X. N. Xu
    • Y. Tian
    • Z. D. Wang

    OriginalPaper 26 May 2021 Pages: 7479 - 7487

    

35. Ablation Stability of In Situ Al₂O₃ Layer in Aluminized AISI 4130 Steels under High-Temperature Plasma Flame Environments

    • W. C. Yang
    • S. Lee
    • J. S. Park

    OriginalPaper 27 May 2021 Pages: 7488 - 7493

    

36. Effect of Pulse Current Frequency on Microstructure and Hot Corrosion Behavior of Tungsten Inert Gas-Welded Joints of N155 Superalloy

    • Amirkeyvan Rahimi
    • Morteza Shamanian
    • Masoud Atapour

    OriginalPaper 17 May 2021 Pages: 7494 - 7509

    

37. Effect of an Addition of Vanadium on the Mechanical Properties of the A6061 Alloy Deformed by Accumulative Roll Bonding

    • Amane Sahli
    • Mabrouk Buabdallah
    • Rafik Zekri

    OriginalPaper 21 May 2021 Pages: 7510 - 7522

    

38. Study of an Intraply/Yarn Composite Submitted to Low-Velocity Impact in the Presence of High Void Content

    • Ricardo Alex Dantas da Cunha
    • Rayane Dantas da Cunha
    • Raimundo Carlos Silverio Freire Júnior

    OriginalPaper 01 June 2021 Pages: 7523 - 7531

    

39. Effect of Material Hardness on Water Lubrication Performance of Thermoplastic Polyurethane under Sediment Environment

    • Zhengming Jia
    • Zhiwei Guo
    • Chengqing Yuan

    OriginalPaper 07 June 2021 Pages: 7532 - 7541

    

40. Friction and Wear Behavior of C17200 Copper-Beryllium Alloy in Dry and Wet Environments

    • Zhibiao Xu
    • Zhengyu Huang
    • Xing Xu

    OriginalPaper 15 June 2021 Pages: 7542 - 7551

    

41. Under-Deposit Corrosion of Carbon Steel Beneath Full Coverage of CaCO₃ Deposit Layer under Different Atmospheres

    • Lin Pang
    • Zhengbin Wang
    • Yugui Zheng

    OriginalPaper 01 June 2021 Pages: 7552 - 7563

    

42. Corrosion and Wear Analysis of High-Velocity Oxy-Fuel Sprayed WC-10Co-4Cr and Colmonoy-6 Coatings on Nickel-Aluminum Bronze Alloy Substrate

    • Mohsen Moghaddasi
    • Mansoor Bozorg
    • Hamid Torbati-Sarraf

    OriginalPaper 30 June 2021 Pages: 7564 - 7576

    

43. Exploration of the Influence Mechanism of La Doping on the Arc Erosion Resistance of Ag/SnO₂ Contact Materials by a Laser-Simulated Arc

    • Songtao Liu
    • Qiaoyan Sun
    • Haiyun Hou

    OriginalPaper 21 June 2021 Pages: 7577 - 7583

    

44. Laboratory Investigation of Microbiologically Influenced Corrosion of X80 Pipeline Steel by Sulfate-Reducing Bacteria

    • Liying Cui
    • Zhiyong Liu
    • Jiamin Shao

    OriginalPaper 21 June 2021 Pages: 7584 - 7596

    

45. Wear Behavior of Ti6Al4V Surfaces Functionalized through Ultrasonic Vibration Turning

    • R. Bertolini
    • A. Ghiotti
    • S. Bruschi

    OriginalPaper Open access 18 June 2021 Pages: 7597 - 7608

    

46. Corrosion Behavior of Stir Cast Al6061-B₄C/TiB₂ Composites Processed by Post-Accumulative Roll Bonding

    • Ali Mohseni
    • Beitallah Eghbali
    • Yaghoub Pazhuhanfar

    OriginalPaper 11 June 2021 Pages: 7609 - 7621

    

47. Influence of Interwire Distance and Arc Length on Welding Process and Defect Formation Mechanism in Double-Wire Pulsed Narrow-Gap Gas Metal Arc Welding

    • Guoqiang Liu
    • Xinhua Tang
    • Haichao Cui

    OriginalPaper 18 June 2021 Pages: 7622 - 7635

    

48. Effect of Tool Rotational Speed on the Microstructure and Associated Mechanical Properties of Incrementally Formed Commercially Pure Titanium

    • G. Yoganjaneyulu
    • S. Vigneshwaran
    • R. F. Laubscher

    OriginalPaper 24 May 2021 Pages: 7636 - 7644

    

49. The Effect of Sr Addition on Hot Tearing Susceptibility of Mg-1Ca-xSr Alloys

    • Hua Zhao
    • Jiangfeng Song
    • Fusheng Pan

    OriginalPaper 04 June 2021 Pages: 7645 - 7654

    

50. Fusion Welding of T23 and T91 Steel Joints for Advanced Thermal Power Plant Application

    • Suvam Chatterjee
    • Manas Kumar Mondal
    • Joydeep Maity

    OriginalPaper 01 June 2021 Pages: 7655 - 7667