Collection
Special Issue: Selected and Expanded Papers from the 2011 International Thermal Spray Conference
- Submission status
- Closed
Special Issue published in June 2012, Vol. 21, No. 3-4 of Journal of Thermal Spray Technology
Editors
-
Basil R. Marple
National Research Council of Canada, Canada
-
Arvind Agarwal
Florida International University, USA
-
Margaret M. Hyland
University of Auckland, New Zealand
-
Yuk-Chiu Lau
GE Power and Water (retired), USA
-
Chang-Jiu Li
Xi’an Jiaotong University, China
-
Rogerio S. Lima
National Research Council of Canada, Canada
-
André McDonald
University of Alberta, Canada
Articles (44 in this collection)
-
-
Editorial
Authors (first, second and last of 7)
- Basil R. Marple
- Arvind Agarwal
- André McDonald
- Content type: News
- Published: 04 April 2012
- Pages: 361 - 362
-
A Novel Plasma-Sprayed Durable Thermal Barrier Coating with a Well-Bonded YSZ Interlayer Between Porous YSZ and Bond Coat
Authors (first, second and last of 4)
- Chang-Jiu Li
- Yong Li
- Cheng-Xin Li
- Content type: Peer Reviewed
- Published: 23 March 2012
- Pages: 383 - 390
-
Particle Size Distribution of the Filling Powder in Cored Wires: Its Effect on Arc Behavior, In-Flight Particle Behavior, and Splat Formation
Authors
- Wolfgang Tillmann
- Mohamed Abdulgader
- Content type: Peer Reviewed
- Published: 21 March 2012
- Pages: 706 - 718
-
B4C/Ni Composite Coatings Prepared by Cold Spray of Blended or CVD-Coated Powders
Authors (first, second and last of 8)
- C. Feng
- V. Guipont
- C. Iacob
- Content type: Peer Reviewed
- Published: 21 March 2012
- Pages: 561 - 570
-
Deposition of Composite LSCF-SDC and SSC-SDC Cathodes by Axial-Injection Plasma Spraying
Authors
- Jeffrey Harris
- Musab Qureshi
- Olivera Kesler
- Content type: Peer-Reviewed
- Published: 17 March 2012
- Pages: 461 - 468
-
Orthorhombic α-MoO3 Coatings with Lath-Shaped Morphology Developed by SPPS: Applications to Super-Capacitors
Authors
- Mehdi Golozar
- Ken Chien
- Thomas W. Coyle
- Content type: Peer-Reviewed
- Published: 16 March 2012
- Pages: 469 - 479
-
WC-Co/Al Multilayer Coatings by Warm Spray Deposition
Authors
- Makoto Watanabe
- Masayuki Komatsu
- Seiji Kuroda
- Content type: Peer Reviewed
- Published: 14 March 2012
- Pages: 597 - 608
-
Deposition of La1−x Sr x Fe1−y Co y O3−δ Coatings with Different Phase Compositions and Microstructures by Low-Pressure Plasma Spraying-Thin Film (LPPS-TF) Processes
Authors (first, second and last of 5)
- N. Zotov
- A. Hospach
- R. Vaßen
- Content type: Peer Reviewed
- Published: 10 March 2012
- Pages: 441 - 447
-
Understanding of Spray Coating Adhesion Through the Formation of a Single Lamella
Authors
- S. Goutier
- M. Vardelle
- P. Fauchais
- Content type: Peer-Reviewed
- Published: 10 March 2012
- Pages: 522 - 530
-
Comparison of the Microstructural Characteristics and Electrical Properties of Thermally Sprayed Al2O3 Coatings from Aqueous Suspensions and Feedstock Powders
Authors (first, second and last of 8)
- Filofteia-Laura Toma
- Lutz-Michael Berger
- Mihails Kusnezoff
- Content type: Peer-Reviewed
- Published: 08 March 2012
- Pages: 480 - 488
-
Effect of Dispersed TiC Content on the Microstructure and Thermal Expansion Behavior of Shrouded-Plasma-Sprayed FeAl/TiC Composite Coatings
Authors (first, second and last of 4)
- Li-Hui Tian
- Cheng-Xin Li
- Guan-Jun Yang
- Content type: Peer-Reviewed
- Published: 07 March 2012
- Pages: 689 - 694
-
Deposition and Characteristics of Submicrometer-Structured Thermal Barrier Coatings by Suspension Plasma Spraying
Authors (first, second and last of 4)
- Alexandre Guignard
- Georg Mauer
- Detlev Stöver
- Content type: Peer-Reviewed
- Published: 02 March 2012
- Pages: 416 - 424
-
Synthesis of Tribologically Favorable Coatings for Hot Extrusion Tools by Suspension Plasma Spraying
Authors (first, second and last of 5)
- M. Erne
- D. Kolar
- Fr.-W. Bach
- Content type: Peer-Reviewed
- Published: 02 March 2012
- Pages: 668 - 675
-
Thermal Spraying of Bioactive Polymer Coatings for Orthopaedic Applications
Authors
- A. Chebbi
- J. Stokes
- Content type: Peer-Reviewed
- Published: 02 March 2012
- Pages: 719 - 730
-
Method and Process Development of Advanced Atmospheric Plasma Spraying for Thermal Barrier Coatings
Authors (first, second and last of 5)
- Sebastian Mihm
- Thomas Duda
- Birger Dzur
- Content type: Peer-Reviewed
- Published: 17 February 2012
- Pages: 400 - 408
-
Characteristics of Ceramic Coatings Made by Thin Film Low Pressure Plasma Spraying (LPPS-TF)
Authors (first, second and last of 4)
- Andreas Hospach
- Georg Mauer
- Detlev Stöver
- Content type: Peer-Reviewed
- Published: 16 February 2012
- Pages: 435 - 440
-
Relationship Between Particle and Plasma Properties and Coating Characteristics of Samaria-Doped Ceria Prepared by Atmospheric Plasma Spraying for Use in Solid Oxide Fuel Cells
Authors
- Mark Cuglietta
- Olivera Kesler
- Content type: Peer-Reviewed
- Published: 15 February 2012
- Pages: 448 - 460
-
Annealing Effect on the Intermetallic Compound Formation of Cold Sprayed Fe/Al Composite Coating
Authors (first, second and last of 4)
- Hong-Tao Wang
- Chang-Jiu Li
- Guan-Jun Yang
- Content type: Peer-Reviewed
- Published: 11 February 2012
- Pages: 571 - 577
-
Application of Structure-Based Models of Mechanical and Thermal Properties on Plasma Sprayed Coatings
Authors (first, second and last of 4)
- Monika Vilémová
- Jiří Matějíček
- Jiří Nohava
- Content type: Peer-Reviewed
- Published: 10 February 2012
- Pages: 372 - 382
-
Titanium Dioxide Coatings Sprayed by a Water-Stabilized Plasma Gun (WSP) with Argon and Nitrogen as the Powder Feeding Gas: Differences in Structural, Mechanical and Photocatalytic Behavior
Authors (first, second and last of 7)
- P. Ctibor
- Z. Pala
- V. Nehasil
- Content type: Peer-Reviewed
- Published: 09 February 2012
- Pages: 425 - 434
-
Impact Conditions for Cold Spraying of Hard Metallic Glasses
Authors (first, second and last of 4)
- A. List
- F. Gärtner
- T. Klassen
- Content type: Peer-Reviewed
- Published: 09 February 2012
- Pages: 531 - 540
-
The Protectiveness of Thermally Grown Oxides on Cold Sprayed CoNiCrAlY Bond Coat in Thermal Barrier Coating
Authors
- A. Manap
- A. Nakano
- K. Ogawa
- Content type: Peer-Reviewed
- Published: 03 February 2012
- Pages: 586 - 596
-
Microtomographic Analysis of Splat Formation and Layer Build-Up of a Thermally Sprayed Coating
Authors
- W. Tillmann
- J. Nellesen
- M. Abdulgader
- Content type: Peer-Reviewed
- Published: 01 February 2012
- Pages: 514 - 521
-
Passive and Pulse-Echo Ultrasonic Monitoring of Cold Spray Process
Authors
- R. Gr. Maev
- S. Titov
- V. Leshchynsky
- Content type: Peer-Reviewed
- Published: 31 January 2012
- Pages: 620 - 627
-
Comparison of Isolated Indentation and Grid Indentation Methods for HVOF Sprayed Cermets
Authors (first, second and last of 4)
- Jiří Nohava
- Petr Haušild
- Radek Enžl
- Content type: Peer-Reviewed
- Published: 28 January 2012
- Pages: 651 - 658
-
Isothermal Oxidation Behavior of NiCoCrAlTaY Coating Deposited by High Velocity Air-Fuel Spraying
Authors (first, second and last of 6)
- Guan-Jun Yang
- Xu-Dong Xiang
- Cheng-Xin Li
- Content type: Peer-Reviewed
- Published: 28 January 2012
- Pages: 391 - 399
-
Formation of Pore Structure and Its Influence on the Mass Transport Property of Vacuum Cold Sprayed TiO2 Coatings Using Strengthened Nanostructured Powder
Authors (first, second and last of 6)
- Guan-Jun Yang
- Kai-Xing Liao
- Shan Li
- Content type: Peer-Reviewed
- Published: 26 January 2012
- Pages: 505 - 513
-
Influence of Handling Parameters on Coating Characteristics in Order to Produce Near-Net-Shape Wear Resistant Coatings
Authors
- W. Tillmann
- B. Krebs
- Content type: Peer-Reviewed
- Published: 25 January 2012
- Pages: 644 - 650
-
Measurement of Specific Enthalpy Under Very Low Pressure Plasma Spray Condition
Authors (first, second and last of 7)
- N. Zhang
- F. Sun
- C. Coddet
- Content type: Peer-Reviewed
- Published: 25 January 2012
- Pages: 489 - 495
-
New Approach to Ceramic/Metal-Polymer Multilayered Coatings for High Performance Dry Sliding Applications
Authors
- A. Rempp
- A. Killinger
- R. Gadow
- Content type: Peer-Reviewed
- Published: 21 January 2012
- Pages: 659 - 667
-
Characteristics of a Plasma Torch Designed for Very Low Pressure Plasma Spraying
Authors
- Yang Gao
- De Ming Yang
- Jianyi Gao
- Content type: Technical Note
- Published: 04 January 2012
- Pages: 740 - 744
-
Thermal Stability of Microstructure and Hardness of Cold-Sprayed cBN/NiCrAl Nanocomposite Coating
Authors
- Xiao-Tao Luo
- Chang-Jiu Li
- Content type: Peer-Reviewed
- Published: 30 December 2011
- Pages: 578 - 585
-
Spraying of Metallic Powders by Hybrid Gas/Water Torch and the Effects of Inert Gas Shrouding
Authors (first, second and last of 4)
- T. Kavka
- J. Matějíček
- M. Hrabovský
- Content type: Peer-Reviewed
- Published: 30 December 2011
- Pages: 695 - 705
-
Heat and Mass Transfer Within an Evaporating Solution Droplet in a Plasma Jet
Authors
- Yanguang Shan
- Yuan Hu
- Content type: Peer-Reviewed
- Published: 28 December 2011
- Pages: 676 - 688
-
Nanostructured Al-Based Metal Matrix Composite Coating Production by Pulsed Gas Dynamic Spraying Process
Authors (first, second and last of 4)
- M. Yandouzi
- H. Bu
- B. Jodoin
- Content type: Peer-Reviewed
- Published: 28 December 2011
- Pages: 609 - 619
-
Study of the Influence of Particle Velocity on Adhesive Strength of Cold Spray Deposits
Authors
- R. Huang
- H. Fukanuma
- Content type: Peer-Reviewed
- Published: 20 December 2011
- Pages: 541 - 549
-
Finite Element Simulation of Impacting Behavior of Particles in Cold Spraying by Eulerian Approach
Authors (first, second and last of 4)
- M. Yu
- W.-Y. Li
- H. L. Liao
- Content type: Technical Note
- Published: 16 December 2011
- Pages: 745 - 752
-
Characterization of Thermal Diffusion Related Properties in Plasma Sprayed Zirconium Coatings
Authors
- K. J. Hollis
- M. E. Hawley
- P. O. Dickerson
- Content type: Peer-Reviewed
- Published: 14 December 2011
- Pages: 409 - 415
-
Comparison of Oxidation and Microstructure of Warm-Sprayed and Cold-Sprayed Titanium Coatings
Authors (first, second and last of 6)
- KeeHyun Kim
- Seiji Kuroda
- Hiroshi Katanoda
- Content type: Peer-Reviewed
- Published: 09 December 2011
- Pages: 550 - 560
-
Simulation of Arc Root Fluctuation in a DC Non-Transferred Plasma Torch with Three Dimensional Modeling
Authors (first, second and last of 4)
- R. Huang
- H. Fukanuma
- Y. Tanaka
- Content type: Peer-Reviewed
- Published: 01 December 2011
- Pages: 636 - 643
-
Numerical Study on the Effect of Substrate Size on the Supersonic Jet Flow and Temperature Distribution Within the Substrate in Cold Spraying
Authors (first, second and last of 4)
- Shuo Yin
- Xiao-fang Wang
- Yue Li
- Content type: Peer-Reviewed
- Published: 01 December 2011
- Pages: 628 - 635
-
Improving Atmospheric Plasma Spraying of Zirconate Thermal Barrier Coatings Based on Particle Diagnostics
Authors (first, second and last of 4)
- Georg Mauer
- Doris Sebold
- Detlev Stöver
- Content type: Peer-Reviewed
- Published: 29 November 2011
- Pages: 363 - 371
-
Mechanical Properties and Dissolution Behavior of Plasma Sprayed Wollastonite Coatings Deposited at Different Substrate Temperatures
Authors (first, second and last of 5)
- Weize Wang
- Jiachun Liang
- Huoxing Hong
- Content type: Peer Reviewed
- Published: 19 November 2011
- Pages: 496 - 504