Articles

1. Thermal Conductivity, Rheology and Electrical Conductivity of Water- and Ethylene Glycol-Based Nanofluids with Copper and Aluminum Particles

   • V. Ya. Rudyak
   • M. I. Pryazhnikov
   • A. V. Minakov

   OriginalPaper 16 April 2024 Pages: 205 - 216

   

2. Structure and Vibrations of Free Ni_n Clusters (n ≤ 20)

   • S. D. Borisova
   • G. G. Rusina

   OriginalPaper 16 April 2024 Pages: 197 - 204

   

3. Effect of Silver Addition on Microstructure, Phase Composition, Microhardness and Surface Oxide Layer Formation of Al_0.5CoCrCu_0.5FeNi and Al_0.5CoCrCuFeNi High-Entropy Alloys

   • O. V. Samoilova
   • S. E. Pratskova
   • E. A. Trofimov

   OriginalPaper 16 April 2024 Pages: 183 - 196

   

4. Changes in the Structural-Phase State and Dislocation Density of Ti_49.8Ni_50.2 Alloy Depending on the Isochronal Annealing Temperature after Severe Plastic Deformation by abc Pressing at 573 K

   • Yu. P. Mironov
   • A. I. Lotkov
   • E. G. Barmina

   OriginalPaper 16 April 2024 Pages: 175 - 182

   

5. Effect of Heat Treatment on the Structure and Properties of Titanium Aluminide Alloy Ti–Al–V–Nb–Cr–Gd Produced by Selective Electron Beam Melting

   • P. V. Panin
   • E. A. Lukina
   • E. B. Alekseev

   OriginalPaper 16 April 2024 Pages: 163 - 174

   

6. Structure, Martensitic Transformations, and Mechanical Properties of Aging Nanocrystalline Ti–50.9 at % Ni Alloy

   • T. M. Poletika
   • S. L. Girsova
   • K. A. Zheronkina

   OriginalPaper 16 April 2024 Pages: 152 - 162

   

7. Methods of Accounting for Temperature and Strain Rate Variation in Multilevel Constitutive Models of Metal Deformation (Analytical Review)

   • A. I. Shveykin
   • A. A. Vshivkova
   • P. V. Trusov

   ReviewPaper 16 April 2024 Pages: 133 - 151

   

8. The Use of Hard and Soft Sphere Models for the Evaluation of Lattice Distortion in B2 High-Entropy Shape Memory Alloys

   • N. N. Resnina
   • S. P. Belyaev
   • I. V. Ponikarova

   OriginalPaper 16 April 2024 Pages: 124 - 132

   

9. Temperature Dependence of the Deformation Behavior of High-Entropy Alloys Co₂₀Cr₂₀Fe₂₀Mn₂₀Ni₂₀, Co₁₉Cr₂₀Fe₂₀Mn₂₀Ni₂₀С₁, and Co₁₇Cr₂₀Fe₂₀Mn₂₀Ni₂₀С₃. Mechanical Properties and Temperature Dependence of Yield Stress

   • E. G. Astafurova
   • K. A. Reunova
   • D. O. Astapov

   OriginalPaper 16 April 2024 Pages: 113 - 123

   

10. Meso–Macro Energy Exchange in Shock-Wave Processes and Dynamic Strength of AB2 Steel

    • Yu. I. Meshcheryakov
    • G. V. Konovalov
    • A. K. Divakov

    OriginalPaper 08 February 2024 Pages: 102 - 112

    

11. Creep Resistance and Structure of 10% Cr–3% Сo–2% W–0.29% Cu–0.17% Re Steel with Low Nitrogen and High Boron Contents for Unit Components of Coal Power Plants

    • A. Fedoseeva

    OriginalPaper 08 February 2024 Pages: 88 - 101

    

12. Effect of Preliminary Ball Milling of Nanomodifiers on Their Efficiency in Laser Surface Treatment of Titanium

    • A. E. Chesnokov
    • V. O. Drozdov
    • A. N. Cherepanov

    OriginalPaper 08 February 2024 Pages: 79 - 87

    

13. Mechanical Properties of Sintered Al–Sn–Fe Alloys

    • N. M. Rusin
    • A. L. Skorentsev
    • K. O. Akimov

    OriginalPaper 08 February 2024 Pages: 69 - 78

    

14. Combination Effect of Transition Metal Impurities on Oxygen Vacancy Formation Energetics in TiO₂

    • A. V. Bakulin
    • L. S. Chumakova
    • S. E. Kulkova

    OriginalPaper 08 February 2024 Pages: 57 - 68

    

15. Localized Plasticity Pattern at the Prefracture Stage: Origin and Development

    • L. B. Zuev
    • Yu. A. Khon

    OriginalPaper 08 February 2024 Pages: 49 - 56

    

16. Development of an Energy-Based Experimental Method for Estimation of Fatigue Crack Evolution in Titanium Alloys

    • A. Yu. Iziumova
    • A. N. Vshivkov
    • O. A. Plekhov

    OriginalPaper 08 February 2024 Pages: 41 - 48

    

17. Dislocation Structure in a Strain Localization Band Formed in Normalized 09G2S Steel under Tension

    • V. M. Farber
    • O. V. Selivanova
    • A. Yu. Zhilyakov

    OriginalPaper 08 February 2024 Pages: 34 - 40

    

18. Experimental and Numerical Investigation of Mesoscale Deformation-Induced Surface Roughening in Polycrystalline Metals and Alloys (Review)

    • E. S. Emelianova
    • O. S. Zinovieva
    • M. Pisarev

    ReviewPaper 08 February 2024 Pages: 16 - 33

    

19. Structural-Phase State and Mechanical Properties of a Laser Cladding Titanium Matrix Composite Based on Ti64 Alloy and TiB₂ Ceramics

    • V. M. Fomin
    • A. G. Malikov
    • A. V. Mishin

    OriginalPaper 08 February 2024 Pages: 1 - 15

    

20. Structure Formation in Surface Layers of Aluminum and Titanium Alloys during Plasma Cutting

    • A. V. Chumaevskii
    • A. V. Nikolaeva
    • E. A. Kolubaev

    OriginalPaper 15 December 2023 Pages: 711 - 721

    

21. Effect of Tantalum on the Impact Toughness of 12% Cr Steels Subjected to Thermomechanical Treatment

    • A. Fedoseeva
    • A. Dolzhenko

    OriginalPaper 15 December 2023 Pages: 701 - 710

    

22. Structure, and Mechanical and Tribological Properties of Ti–Cr–C–Ni–Fe Composite Coatings

    • M. S. Antipov
    • P. M. Bazhin
    • A. M. Stolin

    OriginalPaper 15 December 2023 Pages: 691 - 700

    

23. A Study of Deformation and Fracture of the Eutectic in an Additively Manufactured Al-Si Composite Alloy

    • A. V. Zemlyanov
    • D. D. Gatiyatullina
    • R. R. Balokhonov

    OriginalPaper Open access 15 December 2023 Pages: 678 - 690

    

24. A Study of the Structure and Mechanical Properties of Nb-Mo-Co-X (X = Hf, Zr, Ti) Refractory High-Entropy Alloys

    • E. S. Panina
    • N. Yu. Yurchenko
    • N. D. Stepanov

    OriginalPaper 15 December 2023 Pages: 666 - 677

    

25. Effect of the Local Stress State on the Fracture Mechanism of Metallic Materials with Different Lattices under Single Loads

    • G. V. Klevtsov
    • R. Z. Valiev
    • N. A. Klevtsova

    OriginalPaper 15 December 2023 Pages: 656 - 665

    

26. Comparative Analysis of Weld Microstructure in Ti-6Al-4V Samples Produced by Rolling and Wire-Feed Electron Beam Additive Manufacturing

    • A. V. Panin
    • M. S. Kazachenok
    • S. A. Martynov

    OriginalPaper Open access 15 December 2023 Pages: 643 - 655

    

27. Analysis of the Properties of a Nonlinear Model for Shear Flow of Thixotropic Media Taking into Account the Mutual Influence of Structural Evolution and Deformation

    • A. V. Khokhlov
    • V. V. Gulin

    OriginalPaper 15 December 2023 Pages: 621 - 642

    

28. Spontaneous Stabilization and Large-Scale Oscillations of an Active Medium with Negative Dissipation

    • A. E. Filippov
    • V. L. Popov

    OriginalPaper 15 December 2023 Pages: 608 - 620

    

29. Effect of the Tool Path on Hardness Uniformity in an Annular Zone of X20Cr13 Steel Surface-Hardened by Friction Stir Processing

    • V. P. Kuznetsov
    • A. S. Skorobogatov
    • I. A. Vorontsov

    OriginalPaper Open access 15 December 2023 Pages: 593 - 607

    

30. Statistical Analysis of Geological and Geophysical Parameters of the Baikal-Mongolia Region

    • A. I. Miroshnichenko
    • K. G. Levi
    • O. F. Lukhneva

    OriginalPaper 12 October 2023 Pages: 581 - 592

    

31. Modification of the Lemaitre Damage Model by a Local Multiaxial Stress State Function

    • A. V. Tumanov

    OriginalPaper 12 October 2023 Pages: 573 - 580

    

32. Investigation of Dynamic Characteristics of Imperfect FG Beams on the Winkler–Pasternak Foundation under Thermal Loading

    • S. Abdelbari
    • A. Attia
    • M. H. Ghazwani

    OriginalPaper 12 October 2023 Pages: 557 - 572

    

33. Refined Engineering Theory of Fracture with a Two-Parameter Strength Criterion

    • V. S. Klyuchantsev
    • V. D. Kurguzov
    • A. V. Shutov

    OriginalPaper 12 October 2023 Pages: 542 - 556

    

34. Influence of Minor Aluminum Addition on the Superplastic Deformation of a Microduplex Cu-Zn Alloy

    • O. A. Yakovtseva
    • P. K. Kaboyi
    • A. V. Mikhaylovskaya

    OriginalPaper 12 October 2023 Pages: 533 - 541

    

35. A Comprehensive Study of Fatigue Crack Initiation and Growth under Very High Cycle Torsional Fatigue Loading

    • I. S. Nikitin
    • A. D. Nikitin
    • B. A. Stratula

    OriginalPaper 12 October 2023 Pages: 523 - 532

    

36. A New Method for Adhesion Strength Assessment of Indented Polymer Coatings

    • S. V. Smirnov
    • M. V. Myasnikova
    • E. O. Smirnova

    OriginalPaper 12 October 2023 Pages: 514 - 522

    

37. An Indentation Study of the Temperature-Dependent Properties of Modified Polyurethanes

    • E. V. Torskaya
    • A. A. Yakovenko
    • A. L. Svistkov

    OriginalPaper 12 October 2023 Pages: 505 - 513

    

38. Effect of Pressure on Elastic Constants and Related Properties of Rare-Earth Intermetallic Compound TbNiAl

    • S. Rai
    • A. K. Prajapati
    • P. K. Yadawa

    OriginalPaper 12 October 2023 Pages: 495 - 504

    

39. High-Strength State and Strengthening Mechanisms of Ultrafine-Grained Titanium

    • E. I. Usmanov
    • L. R. Rezyapova
    • R. Z. Valiev

    OriginalPaper 12 October 2023 Pages: 483 - 494

    

40. Transformation of a Longitudinal Elastic Wave into a Pochhammer Wave

    • M. N. Krivosheina
    • E. V. Tuch

    OriginalPaper 08 August 2023 Pages: 477 - 482

    

41. Effect of Adding Graphene Oxide Nanoplatelets on the Araldite Adhesive Fracture Strength under Mixed-Mode I/II Loading

    • Y. Bolghand
    • T. N. Chakherlou
    • H. Biglari

    OriginalPaper 08 August 2023 Pages: 466 - 476

    

42. Mechanical Simulation Model for Acoustic Damage Monitoring in Polycrystalline Materials

    • A. A. Khlybov
    • A. L. Uglov
    • D. A. Ryabov

    OriginalPaper 08 August 2023 Pages: 459 - 465

    

43. Mechanical Characterization of Additively Manufactured Orthopedic Cellular Implants: Case Study on Different Cell Types and Effect of Defects

    • N. Rahmat
    • J. Kadkhodapour
    • M. Arbabtafti

    OriginalPaper 08 August 2023 Pages: 443 - 458

    

44. Nonadiabatically Driven Subcritical Crack Nucleation in Solids

    • Yu. A. Khon

    OriginalPaper Open access 08 August 2023 Pages: 434 - 442

    

45. Quantitative Characterization of Grain Boundaries in Ultrafine-Grained Austenitic Stainless Steel by Cluster Analysis

    • P. V. Kuznetsov
    • A. V. Stolbovsky
    • I. V. Belyaeva

    OriginalPaper 08 August 2023 Pages: 415 - 433

    

46. Coupled Poromechanics and Adsorption in Multiple-Porosity Solids

    • W. Zhang
    • A. Mehrabian

    OriginalPaper 08 August 2023 Pages: 402 - 414

47. Fracture of 30CrMnSiA Steel under Mixed-Mode Loads

    • L. R. Botvina
    • E. N. Beletsky
    • A. I. Bolotnikov

    OriginalPaper 08 August 2023 Pages: 391 - 401

    

48. Fatigue and Fracture Behavior of AlSi10Mg Manufactured by Selective Laser Melting: A Review

    • Z. Jiang
    • J. Sun
    • G. Qian

    OriginalPaper 08 August 2023 Pages: 367 - 390

    

49. Simple Quasi-3D and 2D Integral Shear Deformation Theories for Buckling Investigation of Advanced Composite Plates

    • A. Younsi
    • F. Bourada
    • M. H. Ghazwani

    OriginalPaper 30 June 2023 Pages: 346 - 366

    

50. Vibration Analysis of Single-Walled Carbon Nanotubes Embedded in a Polymer Matrix under Magnetic Field Considering the Surface Effect Based on Nonlocal Strain Gradient Elasticity Theory

    • N. Moulay
    • M. Liani
    • M. H. Ghazwani

    OriginalPaper 30 June 2023 Pages: 329 - 345