1. Precipitation and Hardening in Magnesium Alloys

   • Jian-Feng Nie

   ReviewPaper 21 July 2012 Pages: 3891 - 3939

   

2. Precipitates and Grain Boundary Strength of an Fe-Mn-Ni Alloy

   • Yoon-Uk Heo
   • Jae Hoon Jang
   • Hu-Chul Lee

   Communication 13 September 2012 Pages: 3940 - 3945

   

3. In Situ Measurement of the γ/γ′ Lattice Mismatch Evolution of a Nickel-Based Single-Crystal Superalloy During Non-isothermal Very High-Temperature Creep Experiments

   • Jean-Briac Le Graverend
   • Laura Dirand
   • José Mendez

   Communication 07 September 2012 Pages: 3946 - 3951

   

4. Delamination of Sensitized Al-Mg Alloy During Fatigue Crack Growth in Room Temperature Air

   • Justin K. Brosi
   • S. Mohsen Seifi
   • John J. Lewandowski

   Communication 18 August 2012 Pages: 3952 - 3956

   

5. Foreword

   • Neal D. Evans
   • Francisca Caballero
   • Rajarshi Banerjee

   Symposium: Approaches for Investigating Phase Transformations at the Atomic Scale 05 October 2011 Pages: 3957 - 3957

6. Understanding the Behavior of Advanced High-Strength Steels Using Atom Probe Tomography

   • Elena Pereloma
   • Hossein Beladi
   • Ilana Timokhina

   Symposium: Approaches for Investigating Phase Transformations at the Atomic Scale 17 September 2011 Pages: 3958 - 3971

   

7. A Molecular Dynamics Simulation Study of the Cavitation Pressure in Liquid Al

   • Jeffrey J. Hoyt
   • Alice A. Potter

   Symposium: Approaches for Investigating Phase Transformations at the Atomic Scale 13 August 2011 Pages: 3972 - 3977

   

8. Microalloying Effect on the Precipitation Processes of Mg-Ca Alloys

   • Chamini L. Mendis
   • Keiichiro Oh-Ishi
   • Kazuhiro Hono

   Symposium: Approaches for Investigating Phase Transformations at the Atomic Scale 20 January 2012 Pages: 3978 - 3987

   

9. Microstructural Parameters Controlling High-Temperature Creep Life of the Nickel-Base Single-Crystal Superalloy MC2

   • Jean-Briac Le Graverend
   • Jonathan Cormier
   • José Mendez

   OriginalPaper 30 May 2012 Pages: 3988 - 3997

   

10. Impact Response and Microstructural Evolution of 316L Stainless Steel under Ambient and Elevated Temperature Conditions

    • Woei-Shyan Lee
    • Tao-Hsing Chen
    • Wen-Zhen Luo

    OriginalPaper 30 May 2012 Pages: 3998 - 4005

    

11. The Effect of Preaging Deformation on the Precipitation Behavior of an Al-Mg-Si Alloy

    • Katharina Teichmann
    • Calin D. Marioara
    • Knut Marthinsen

    OriginalPaper 31 May 2012 Pages: 4006 - 4014

    

12. Phase Equilibria of the Cu-Ti-Er System at 773 K (500 °C) and Stability of the CuTi₃ Phase

    • Yongzhong Zhan
    • Dan Peng
    • Jia She

    OriginalPaper 30 August 2012 Pages: 4015 - 4022

    

13. Structure of Cu-Sn Melt at High Temperature

    • J. X. Hou
    • C. W. Zhan
    • Heeman Choe

    OriginalPaper 23 June 2012 Pages: 4023 - 4027

    

14. Analysis of Phase Distribution in Thin Surface Layers Comparable to the Penetration Depth of X-Rays

    • P. Rozenak
    • E. Shani

    OriginalPaper 07 August 2012 Pages: 4028 - 4042

    

15. Interdiffusion in the Mg-Al System and Intrinsic Diffusion in β-Mg₂Al₃

    • Sarah Brennan
    • Katrina Bermudez
    • Yongho Sohn

    OriginalPaper 27 June 2012 Pages: 4043 - 4052

    

16. Effect of Boron on Carbide Coarsening at 873 K (600 °C) in 9 to 12 pct Chromium Steels

    • Fang Liu
    • Dan H.R. Fors
    • Göran Wahnström

    OriginalPaper 23 May 2012 Pages: 4053 - 4062

    

17. Premature Fracture Mechanism in an Fe-Mn-C Austenitic Steel

    • Motomichi Koyama
    • Takahiro Sawaguchi
    • Kaneaki Tsuzaki

    OriginalPaper 23 May 2012 Pages: 4063 - 4074

    

18. Hydrogen Embrittlement of Automotive Advanced High-Strength Steels

    • Gianfranco Lovicu
    • Mauro Bottazzi
    • Renzo Valentini

    OriginalPaper 30 June 2012 Pages: 4075 - 4087

    

19. Correlation of Microstructure with Mechanical Properties of Zr-Based Amorphous Matrix Composite Reinforced with Tungsten Continuous Fibers and Ductile Dendrites

    • Chang-Young Son
    • Gyeong Su Kim
    • Sunghak Lee

    OriginalPaper 04 July 2012 Pages: 4088 - 4096

    

20. The Role of Local Microstructure on Small Fatigue Crack Propagation in an α + β Titanium Alloy, Ti-6Al-2Sn-4Zr-6Mo

    • C. J. Szczepanski
    • S. K. Jha
    • J. W. Jones

    OriginalPaper 06 June 2012 Pages: 4097 - 4112

    

21. Microstructural Evolution and Mechanical Properties of Short-Term Thermally Exposed 9/12Cr Heat-Resistant Steels

    • Wei Wang
    • Wei Yan
    • Ke Yang

    OriginalPaper 13 June 2012 Pages: 4113 - 4122

    

22. Experimental Study of the Biaxial Cyclic Behavior of Thin-Wall Tubes of NiTi Shape Memory Alloys

    • X. M. Wang
    • Q. T. Zhou
    • Z. F. Yue

    OriginalPaper 20 July 2012 Pages: 4123 - 4128

    

23. Notch-Fatigue Properties of Advanced TRIP-Aided Bainitic Ferrite Steels

    • Nobuo Yoshikawa
    • Junya Kobayashi
    • Koh-ichi Sugimoto

    OriginalPaper 27 June 2012 Pages: 4129 - 4136

    

24. Microstructure and Creep Behavior of High-Pressure Die-Cast Magnesium Alloy AE44

    • S.M. Zhu
    • J.F. Nie
    • P. Bakke

    OriginalPaper 06 June 2012 Pages: 4137 - 4144

    

25. Grain Refinement of AZ31 Magnesium Alloy Weldments by AC Pulsing Technique

    • N. Kishore Babu
    • C. E. Cross

    OriginalPaper 06 June 2012 Pages: 4145 - 4154

    

26. Microstructural Evolution and Mechanical Properties of Fusion Welds in an Iron-Copper-Based Multicomponent Steel

    • Jeffrey D. Farren
    • Allen H. Hunter
    • Ernst Kozeschnik

    OriginalPaper 04 July 2012 Pages: 4155 - 4170

    

27. Effect of Postweld Heat Treatment on Microstructure, Hardness, and Tensile Properties of Laser-Welded Ti-6Al-4V

    • Abu Syed H. Kabir
    • Xinjin Cao
    • Mamoun Medraj

    OriginalPaper 03 June 2012 Pages: 4171 - 4184

    

28. Assessment of CpTi Surface Properties after Nitrogen Ion Implantation with Various Doses and Energies

    • Mohamad Ali Fulazzaky
    • Nurdin Ali
    • Mohd Imran Ghazali

    OriginalPaper 23 May 2012 Pages: 4185 - 4193

    

29. A Precious Metal-Free Electroless Technique for the Deposition of Copper on Carbon Fibers

    • Dehui Che
    • Guangchun Yao
    • Zhuokun Cao

    Symposium: Coatings for Structural, Biological, and Electronic Applications 18 November 2011 Pages: 4194 - 4199

    

30. Measuring the Process Variability in Triboluminescence Emission Yield for EuD₄TEA

    • William A. Hollerman
    • Ross S. Fontenot
    • Mohan D. Aggarwal

    OriginalPaper 12 June 2012 Pages: 4200 - 4203

    

31. Mechanism for the Role of Silicon on the Transition from Graphite to Cementite Eutectic in Cast Iron

    • Edward Fraś
    • Marcin Górny
    • Hugo F. Lopez

    OriginalPaper 23 May 2012 Pages: 4204 - 4218

    

32. Isothermal Peritectic Coupled Growth in Directionally Solidified Cu-20 wt pct Sn Alloy

    • Yanqing Su
    • Dongmei Liu
    • Hengzhi Fu

    OriginalPaper 23 June 2012 Pages: 4219 - 4223

    

33. Influence of Processing Severity During Equal-Channel Angular Pressing on the Microstructure of an Al-Zn-Mg-Cu Alloy

    • Carmen M. Cepeda-Jiménez
    • Juan M. García-Infanta
    • Fernando Carreño

    OriginalPaper 26 May 2012 Pages: 4224 - 4236

    

34. Gas–Solid Interactions During Nonisothermal Heat Treatment of a High-Strength CrMnCN Austenitic Steel Powder: Influence of Atmospheric Conditions and Heating Rate on the Densification Behavior

    • Nikolaj Krasokha
    • Sebastian Weber
    • Werner Theisen

    OriginalPaper 30 May 2012 Pages: 4237 - 4246

    

35. Strain Energy During Mechanical Milling: Part I. Mathematical Modeling

    • Yaojun Lin
    • Bo Yao
    • Enrique J. Lavernia

    OriginalPaper 06 June 2012 Pages: 4247 - 4257

    

36. Strain Energy During Mechanical Milling: Part II. Experimental

    • Yaojun Lin
    • Bo Yao
    • Enrique J. Lavernia

    OriginalPaper 26 May 2012 Pages: 4258 - 4265

    

37. A Microstructure-Based Constitutive Model for Superplastic Forming

    • Reza Jafari Nedoushan
    • Mahmoud Farzin
    • Dorel Banabic

    OriginalPaper 23 May 2012 Pages: 4266 - 4280

    

38. Improved Resistance to Laser Weld Heat-Affected Zone Microfissuring in a Newly Developed Superalloy HAYNES 282

    • L. O. Osoba
    • R. G. Ding
    • O. A. Ojo

    OriginalPaper 01 September 2012 Pages: 4281 - 4295

    

39. Refinement of Ferrite Grain Size near the Ultrafine Range by Multipass, Thermomechanical Compression

    • S. Patra
    • S. Neogy
    • A. Haldar

    OriginalPaper 01 September 2012 Pages: 4296 - 4310

    

40. Multipass Friction-Stir Processing and its Effect on Mechanical Properties of Aluminum Alloy 5086

    • K. N. Ramesh
    • S. Pradeep
    • Vivek Pancholi

    OriginalPaper 26 May 2012 Pages: 4311 - 4319

    

41. Impact Toughness of Ultrafine-Grained Interstitial-Free Steel

    • Onur Saray
    • Gencaga Purcek
    • Hans J. Maier

    OriginalPaper 08 June 2012 Pages: 4320 - 4330

    

42. Continuous Twin Screw Rheo-Extrusion of an AZ91D Magnesium Alloy

    • M. Xia
    • Y. Huang
    • Z. Fan

    OriginalPaper 19 July 2012 Pages: 4331 - 4344

    

43. The Effects of Sample Position and Gas Flow Pattern on the Sintering of a 7xxx Aluminum Alloy

    • X. N. Yuan
    • S. M. Aminossadati
    • M. Qian

    OriginalPaper 30 May 2012 Pages: 4345 - 4355

    

44. Microstructure and Properties of Zircon-Added Carbon Refractories for Blast Furnace

    • Tianbin Zhu
    • Yawei Li
    • Shujing Li

    OriginalPaper 06 July 2012 Pages: 4356 - 4364

    

45. Characterization and In Vitro Corrosion Investigations of Thermal Sprayed Hydroxyapatite and Hydroxyapatite-Titania Coatings on Ti Alloy

    • Tejinder Pal Singh Sarao
    • Hazoor Singh Sidhu
    • Harpreet Singh

    OriginalPaper 22 May 2012 Pages: 4365 - 4376

    

46. Effect of Mass Fraction of Dolomite on the Foaming Behavior of AlSiCu Alloy Foam by Powder Metallurgy Route

    • Takuya Koizumi
    • Kota Kido
    • Takashi Nakamura

    OriginalPaper 07 July 2012 Pages: 4377 - 4382

    

47. Effect of Zn Content on Microstructure and Mechanical Properties of MgZnYLaMM Alloys

    • Pablo Pérez
    • Gerardo Garcés
    • Paloma Adeva

    OriginalPaper 13 June 2012 Pages: 4383 - 4396

    

48. Effects of CaF₂ Coating on the Microstructures and Mechanical Properties of Tungsten Inert Gas Welded AZ31 Magnesium Alloy Joints

    • Jun Shen
    • Linzhi Wang
    • Dan Wang

    OriginalPaper 11 July 2012 Pages: 4397 - 4405

    

49. Characterization of the Surface Film Formed on Molten AZ91D Magnesium Alloy in Atmospheres Containing SO₂

    • Xian-Fei Wang
    • Shou-Mei Xiong

    OriginalPaper 07 July 2012 Pages: 4406 - 4413

    

50. Analysis and Characterization of Phase Evolution of Nanosized BaTiO₃ Powder Synthesized Through a Chemically Modified Sol-Gel Process

    • Rouholah Ashiri

    OriginalPaper 12 June 2012 Pages: 4414 - 4426