1. Effects of Electron Beam Processing on Fatigue Fracture Propagation Pattern and Formation of Deformation Zone on the Fracture Surface in Titanium Nickelide

   • S. N. Meisner
   • L. L. Meisner

   PHYSICOCHEMICAL FOUNDATIONS OF DEVELOPMENT OF MATERIALS AND TECHNOLOGIES 01 March 2024 Pages: 1141 - 1151

   

2. Welding of High-Nitrogen Austenitic Steels (Review)

   • V. S. Kostina
   • M. V. Kostina

   PHYSICOCHEMICAL FOUNDATIONS OF DEVELOPMENT OF MATERIALS AND TECHNOLOGIES 01 March 2024 Pages: 1152 - 1164

3. Traditional and New Approaches to the Creation of Biomedical Materials Based on Polyhydroxyalkanoates with Antimicrobial Activity

   • P. M. Tyubaeva
   • A. A. Popov
   • A. A. Olkhov

   PHYSICOCHEMICAL FOUNDATIONS OF DEVELOPMENT OF MATERIALS AND TECHNOLOGIES 01 March 2024 Pages: 1165 - 1185

4. Study of the Conditions for Obtaining Precursors Intended for 3D Technologies from a Heat-Resistant Alloy Based on RuAl

   • K. B. Povarova
   • A. A. Drozdov
   • A. E. Morozov

   PHYSICOCHEMICAL FOUNDATIONS OF DEVELOPMENT OF MATERIALS AND TECHNOLOGIES 01 March 2024 Pages: 1186 - 1197

   

5. Thin Nanostructured n-WSe₂ Films and Their Application in Semiconductor p-Si Photocathodes for Hydrogen Production by Water Splitting

   • O. V. Rubinkovskaya
   • D. V. Fominski
   • V. Yu. Fominski

   PHYSICOCHEMICAL FOUNDATIONS OF DEVELOPMENT OF MATERIALS AND TECHNOLOGIES 01 March 2024 Pages: 1198 - 1206

   

6. Processes on the Glass Surface under Irradiation with Medium-Energy Electrons

   • R. H. Khasanshin
   • L. S. Novikov

   MATERIALS FOR AVIATION AND SPACE TECHNIQUES 01 March 2024 Pages: 1207 - 1213

   

7. Studying Weldability in Semi-Finished Products Made of an Al–Mg–Si–Cu Alloy

   • Yu. S. Oglodkova
   • K. V. Antipov
   • A. S. Rudchenko

   MATERIALS FOR AVIATION AND SPACE TECHNIQUES 01 March 2024 Pages: 1214 - 1219

   

8. Chalcogenides of Bismuth Obtained by Various Methods

   • L. D. Ivanova
   • Yu. V. Granatkina
   • R. A. Karima

   ELECTRONIC MATERIALS 01 March 2024 Pages: 1220 - 1227

   

9. Features of Defect Structure and Photoluminescence of Nominally Pure LiNbO₃ Crystals Grown from a Boron-Doped Charge

   • N. V. Sidorov
   • A. V. Kadetova
   • M. N. Palatnikov

   ELECTRONIC MATERIALS 01 March 2024 Pages: 1228 - 1236

   

10. Ion-Beam-Assisted Formation of the Silver-Containing Surface of Porous Silicon

    • V. V. Perinsky
    • I. V. Perinskaya
    • L. E. Kuts

    ELECTRONIC MATERIALS 01 March 2024 Pages: 1237 - 1244

    

11. Studying the Mechanical Properties and Structure of the Silver–Polyethylene Terephthalate Composite

    • D. V. Panov

    ELECTRONIC MATERIALS 01 March 2024 Pages: 1245 - 1250

    

12. Study of the pH Effect on the Sorption Properties of Nanostructured Graphene-Containing Composite Materials Modified with Polyaniline for Removal of Various Chemical Nature Polutants

    • T. S. Kuznetsova
    • T. V. Pas’ko
    • A. G. Tkachev

    MATERIALS FOR HUMAN LIFE SUPPORT AND ENVIRONMENTAL PROTECTION 01 March 2024 Pages: 1251 - 1256

    

13. Low-Temperature Aging of Al₂O₃–[ZrYb]O₂ Composites Containing Strontium Hexaaluminate

    • L. I. Podzorova
    • A. A. Il’icheva
    • G. P. Kochanov

    MATERIALS FOR HUMAN LIFE SUPPORT AND ENVIRONMENTAL PROTECTION 01 March 2024 Pages: 1257 - 1262

    

14. Physicochemical, Structural, and Surface Properties of Silicon Dioxide Produced from Mineral Raw Materials

    • D. V. Mayorov
    • Yu. O. Velyaev

    MATERIALS FOR HUMAN LIFE SUPPORT AND ENVIRONMENTAL PROTECTION 01 March 2024 Pages: 1263 - 1269

    

15. Studying an Iron Oxide Nanopowder as a Bioactive Material

    • V. S. Kataev
    • M. A. Fedotov
    • A. A. Alpatov

    MATERIALS FOR HUMAN LIFE SUPPORT AND ENVIRONMENTAL PROTECTION 01 March 2024 Pages: 1270 - 1274

    

16. Effects of Mesenchymal Stem Cells on the Physical and Mechanical Properties of Polyester Scaffolds of Various Architectonics

    • I. V. Arutyunyan
    • A. G. Dunaev
    • V. K. Popov

    MATERIALS FOR HUMAN LIFE SUPPORT AND ENVIRONMENTAL PROTECTION 01 March 2024 Pages: 1275 - 1284

    

17. The Effect of the Porosity of Materials Based on Tricalcium Phosphate on the Behavior of Mesenchymal Stem Cells

    • P. V. Evdokimov
    • A. K. Kiseleva
    • V. I. Putlayev

    MATERIALS FOR HUMAN LIFE SUPPORT AND ENVIRONMENTAL PROTECTION 01 March 2024 Pages: 1285 - 1291

    

18. Behavior of Dopant Ions in the Solution Synthesis of Substituted Calcium Phosphates

    • I. V. Fadeeva
    • A. A. Forysenkova
    • S. M. Barinov

    MATERIALS FOR HUMAN LIFE SUPPORT AND ENVIRONMENTAL PROTECTION 01 March 2024 Pages: 1292 - 1297

19. Methane Adsorption Properties of a Functional Porous Material Based on Coffee Waste

    • A. E. Memetova
    • A. D. Zelenin
    • E. S. Mkrtchyan

    MATERIALS FOR HUMAN LIFE SUPPORT AND ENVIRONMENTAL PROTECTION 01 March 2024 Pages: 1298 - 1304

    

20. Structure and Magnetic Properties of (Sm,Zr)(Co,Fe,Cu)_z Alloy Powders for Bonded Magnets

    • N. B. Kolchugina
    • N. A. Dormidontov
    • A. S. Bakulina

    GENERAL PURPOSE MATERIALS 01 March 2024 Pages: 1305 - 1311

    

21. Synthesis, Structure, and Properties of Diboride Solid Solutions (Hf_{1 – x}Ta_x)B₂

    • V. V. Kurbatkina
    • E. I. Patsera
    • E. A. Levashov

    GENERAL PURPOSE MATERIALS 01 March 2024 Pages: 1312 - 1320

    

22. Choice of Accelerators of the Vulcanization Group for Rubbers Based on Epichlorohydrin Rubber

    • M. L. Davydova
    • A. R. Khaldeeva
    • M. D. Sokolova

    GENERAL PURPOSE MATERIALS 01 March 2024 Pages: 1321 - 1326

    

23. Methane Sorption Capacity of a Carbon Material Based on Polymer Raw Materials

    • A. E. Memetova
    • A. D. Zelenin
    • N. A. Chapaksov

    GENERAL PURPOSE MATERIALS 01 March 2024 Pages: 1327 - 1334

    

24. Changes in the Microstructure and Hardness after Heat Treatment of a Billet Made of Powder High-Speed Steel R6M5K5 Containing a Diffusion-Alloyed Additive

    • A. S. Akhmetov
    • Zh. V. Eremeeva

    GENERAL PURPOSE MATERIALS 01 March 2024 Pages: 1335 - 1339

    

25. Investigation of the Influence of Carbon Fillers on the Manifestation of the Effect of Tensoresistivity in Tire Regenerates

    • N. V. Shadrinov
    • K. P. Antoev

    GENERAL PURPOSE MATERIALS 01 March 2024 Pages: 1340 - 1347

    

26. Features of Spark Erosion Fine Powders of Mo and Nb Alloys

    • N. V. Shchipalkina
    • S. V. Pshenov
    • E. G. Kolesnikov

    GENERAL PURPOSE MATERIALS 01 March 2024 Pages: 1348 - 1355

    

27. Potentiodynamic Study of BLa Lead Babbitt (PbSb15Sn10) with Lanthanum in NaCl-Based Electrolyte Medium

    • M. S. Zarifova
    • I. N. Ganiyev
    • F. K. Khodzhayev

    GENERAL PURPOSE MATERIALS 01 March 2024 Pages: 1356 - 1360

    

28. Investigation of the Effect of LiCl and LiF Additives on the Kinetics of Spark Plasma Sintering of Fine-Grained Alumina

    • M. S. Boldin
    • A. A. Popov
    • A. A. Murashov

    NEW TECHNOLOGIES FOR OBTAINING AND PROCESSING MATERIALS 01 March 2024 Pages: 1361 - 1370

    

29. High-Strength Fluoroplastic Composites with Enhanced Resistance to Deformation under Load

    • P. N. Petrova
    • M. A. Markova
    • A. L. Fedorov

    NEW TECHNOLOGIES FOR OBTAINING AND PROCESSING MATERIALS 01 March 2024 Pages: 1371 - 1376

    

30. Effect of Low-Temperature Plasma on Polyketone Films: Changes in the Chemical Structure and Surface Morphology

    • M. S. Piskarev
    • A. V. Zinoviev
    • A. A. Kuznetsov

    NEW TECHNOLOGIES FOR OBTAINING AND PROCESSING MATERIALS 01 March 2024 Pages: 1377 - 1382

    

31. Dynamic Strength of a Fine-Grained Alumina Ceramic Obtained by Spark Plasma Sintering

    • N. V. Melekhin
    • M. S. Boldin
    • N. Yu. Tabachkova

    NEW TECHNOLOGIES FOR OBTAINING AND PROCESSING MATERIALS 01 March 2024 Pages: 1383 - 1394

    

32. Influence of the Technological Mode of Mixing and Curing System on the Properties of Compositions Based on Nitrile Rubber and Ultrahigh Molecular Weight Polyethylene

    • N. V. Shadrinov
    • A. A. Borisova
    • K. P. Antoev

    NEW TECHNOLOGIES FOR OBTAINING AND PROCESSING MATERIALS 01 March 2024 Pages: 1395 - 1401

    

33. Influence of the Number of Impregnation Stages on the Macrostructural and Strength Characteristics of Glassy Carbon Foams

    • D. V. Ponomareva
    • E. I. Timoshchuk
    • V. Yu. Takhtin

    NEW TECHNOLOGIES FOR OBTAINING AND PROCESSING MATERIALS 01 March 2024 Pages: 1402 - 1407

    

34. Effect of Mechanical Activation Time on the Structure and Mechanical Properties of W–Cu Powder Composite

    • E. V. Evstratov
    • A. S. Baikin
    • S. I. Averin

    NEW TECHNOLOGIES FOR OBTAINING AND PROCESSING MATERIALS 01 March 2024 Pages: 1408 - 1413

    

35. The Influence of the Structure of Azo Compounds on the Deposition Process and the Quality of Copper Coatings on Anodized Aluminum Alloys

    • T. I. Devyatkina
    • R. V. Taranets
    • V. V. Isaev

    NEW TECHNOLOGIES FOR OBTAINING AND PROCESSING MATERIALS 01 March 2024 Pages: 1414 - 1421

    

36. Investigation of the Amount of Polyvinylpyrrolidone as Gelling Agent to Lanthanum Cobaltite Micropowders Synthesized by Sol-Gel Method

    • E. A. Ermakova
    • S. S. Strelnikova
    • M. S. Chuvikina

    NEW TECHNOLOGIES FOR OBTAINING AND PROCESSING MATERIALS 01 March 2024 Pages: 1422 - 1428

    

37. Production Technology and Properties of High-Temperature Piezoceramic Materials Based on Phases in the System (1 – y)(Bi_0.8Ba_0.2)Fe_0.8Ti_0.2O₃–y(Ba_0.85Ca_0.15)Ti_0.90Zr_0.10O₃

    • A. A. Nesterov
    • M. I. Tolstunov

    NEW TECHNOLOGIES FOR OBTAINING AND PROCESSING MATERIALS 01 March 2024 Pages: 1429 - 1434

    

38. Synthesis and Catalytic Activity of Highly Dispersed Solid Solutions Ce_0.9Sn_0.1O₂ and Ce_0.8Sn_0.1Zr_0.1O₂ in CO Oxidation

    • E. A. Simakina
    • E. Yu. Liberman
    • A. V. Denisenko

    NEW TECHNOLOGIES FOR OBTAINING AND PROCESSING MATERIALS 01 March 2024 Pages: 1435 - 1440

    

39. Electropulse (Spark) Plasma Sintering of Ultrafine-Grained WC–Al₂O₃ Ceramics

    • E. A. Lantsev
    • A. V. Nokhrin
    • A. V. Terentyev

    NEW TECHNOLOGIES FOR OBTAINING AND PROCESSING MATERIALS 01 March 2024 Pages: 1441 - 1450

    

40. Development of Direct Laser Deposition Technology for Large-Scale Products of Nuclear Power Engineering

    • V. A. Korolev
    • A. V. Sidorov
    • D. A. Nameev

    NEW TECHNOLOGIES FOR OBTAINING AND PROCESSING MATERIALS 01 March 2024 Pages: 1451 - 1457

    

41. Results on Testing New Process to Make Nitrogen- and Carbon-Containing Precursor Based on Vanadium and Aluminum to Smelt V–Al–N–C Master Alloy

    • A. V. Larionov
    • D. V. Taranov
    • K. V. Pikulin

    NEW TECHNOLOGIES FOR OBTAINING AND PROCESSING MATERIALS 01 March 2024 Pages: 1458 - 1464

    

42. Magnetic Properties of Soft Magnetic Composites Based on Iron Powder with a Multilayer Insulating Coating

    • G. A. Govor
    • A. O. Larin
    • A. L. Zhaludkevich

    NEW TECHNOLOGIES FOR OBTAINING AND PROCESSING MATERIALS 01 March 2024 Pages: 1465 - 1468

    

43. Physicochemical Properties and Functional Characteristics of a Tungsten-Free Hard Alloy in the TiC–TiNi System after Ion-Beam Treatment

    • A. M. Badamshin
    • S. N. Nesov
    • O. Yu. Burgonova

    NEW TECHNOLOGIES FOR OBTAINING AND PROCESSING MATERIALS 01 March 2024 Pages: 1469 - 1475

    

44. Influence of 3D Printing Parameters on the Mechanical Properties of Polyethylene Terephthalate Glycol (PET-G) Products

    • O. Yu. Elagina
    • A. A. Ushkarev
    • L. A. Savenkov

    NEW TECHNOLOGIES FOR OBTAINING AND PROCESSING MATERIALS 01 March 2024 Pages: 1476 - 1481

    

45. Synchrotron Radiation and X-Ray Diffraction Study of Ti–Al–C-Based Coatings

    • A. A. Maslov
    • A. Yu. Nazarov
    • K. N. Ramazanov

    NEW TECHNOLOGIES FOR OBTAINING AND PROCESSING MATERIALS 01 March 2024 Pages: 1482 - 1486

    

46. Tribological Properties of Structural Alloy Steels after Laser Surface Modification

    • S. I. Yaresko
    • A. T. Kozakov
    • V. I. Scherbakov

    NEW TECHNOLOGIES FOR OBTAINING AND PROCESSING MATERIALS 01 March 2024 Pages: 1487 - 1496

    

47. Porosity of Nickel Nanopowder Compacts Consolidated by Gas Extrusion

    • M. I. Alymov
    • A. I. Epishin
    • F. F. Galiev

    METHODS OF STUDY OF PROPERTIES OF MATERIALS 01 March 2024 Pages: 1497 - 1499