Abstract
In this work, a study was made of the change in the microstructure of a hot-pressed billet from a powder mixture of high-speed steel grade R6M5K5 containing a diffusion-alloyed additive based on tungsten, molybdenum, cobalt, and iron after heat treatment processes: quenching in oil at a temperature of 1230°C and double high tempering at 550°C for 60 min. The study was carried out using electron microscopy and energy dispersive X-ray spectroscopy. After quenching, dissolution of small-sized carbides in the matrix is observed, and after twofold tempering, secondary carbides of the M6C and MC types are already precipitated. The second type of carbides is formed from a separate structural component—a phase based on ferrovanadium, whose powder was used as a source of vanadium. Also, cobalt is unevenly distributed in the matrix, which is concentrated in a separate phase based on a diffusion-alloyed additive. These phases hardly dissolve and are quite stable under these conditions of hot pressing and heat treatment. It is shown that the hardness of blanks changes from 63.1 HRA after hot pressing to 67.2 HRA after quenching and up to 66.3 HRA after double tempering.
REFERENCES
Mesquita, R.A. and Barbosa, C.A., Spray forming high speed steel—properties and processing, Mater. Sci. Eng., A, 2004, vol. 383, no. 1, pp. 87–95. https://doi.org/10.1016/j.msea.2004.02.035
Zhao, S.L., Fan, J.F., Zhang, J.Y., et al., High speed steel produced by spray forming, Adv. Manuf., 2016, vol. 4, no. 2, pp. 115–122. https://doi.org/10.1007/s40436-016-0137-6
Furuya, K., Jitsukawa, S., and Saito, T., Application of the sinter-HIP method to manufacture Cr–Mo–W–V–Co high-speed steel via powder metallurgy, Materials, 2022, vol. 15, no. 6, p. 2300. https://doi.org/10.3390/ma15062300
Ageev, S.V. and Girshov, V.L., The hot isostatic pressure in the powder metallurgy, Metalloobrabotka, 2015, no. 4 (88), pp. 56–60.
Wentzcovitch, A., Filho, F.A., da Silva, L.C.E., et al., Sintering of AISI M-2 high speed steel with the addition of NbC, Mater. Sci. Forum, 2012, vols. 727–728, pp. 90–95. https://doi.org/10.4028/www.scientific.net/MSF.727-728.90
Chen, N., Luo, R., Xiong, H., et al., Dense M2 high speed steel containing core-shell MC carbonitrides using high-energy ball milled M2/VN composite powders, Mater. Sci. Eng., A, 2020, vol. 771, p. 138628. https://doi.org/10.1016/j.msea.2019.138628
Graning, T., Rieth, M., Leiste, H., et al., On the mechanical alloying of novel austenitic dual-precipitation strengthened steels, Mater. Des., 2022, vol. 213, p. 110316. https://doi.org/10.1016/j.matdes.2021.110316
Lyu, C., Yao, Y., Zhang, X., et al., Influence of tempering temperature on the microstructure and wear properties of powder metallurgy high-speed steels, Steel Res. Int., 2022, vol. 93, no. 6, p. 2100639. https://doi.org/10.1002/srin.202100639
Wang, H.B., Hong, D., Hou, L., et al., Influence of tempering temperatures on the microstructure, secondary carbides and mechanical properties of spray-deposited AISI M3:2 high-speed steel, Mater. Chem. Phys., 2020, vol. 255, p. 123554. https://doi.org/10.1016/j.matchemphys.2020.123554
Hlosta, J., Žurovec, D., Jezerska, L., et al., Effect of particle shape and size on the compressibility and bulk properties of powders in powder metallurgy, Proc. 25th Anniv. Int. Conf. on Metallurgy and Materials (Metal 2016), Brno, Czech Republic, 2016, pp. 1394–1399. ISBN 978-80-87294-67-3.
Akhmetov, A.S. and Eremeeva, Zh.V., Investigation of hot pressing process of high-speed steel powder mixture with diffusion-alloyed additive, Materialovedenie, 2022, no. 9, pp. 35–40. https://elibrary.ru/item.asp?id=49448533
GOST (State Standard) 28393-89: PM Bars and Strips of High-Speed Steel. General Specifications, 1991.
Peng, H.L., Hu, L., Ngai, T., et al., Effects of austenitizing temperature on microstructure and mechanical property of a 4-GPa-grade PM high-speed steel, Mater. Sci. Eng., A, 2018, vol. 719, pp. 21–26. https://doi.org/10.1016/j.msea.2018.02.010
Rakhadilov, B.K., Wieleba, W., Kylyshkanov, M.K., et al., Structure and phase composition of high-speed steels, Bull. Karaganda Univ. Phys. Ser., 2020, no. 2 (98), pp. 83–92. https://doi.org/10.31489/2020Ph2/83-92
Toji, Y., Miyamoto, G., and Raabe, D., Carbon partitioning during quenching and partitioning heat treatment accompanied by carbide precipitation, Acta Mater., 2015, vol. 86, pp. 137–147. https://doi.org/10.1016/j.actamat.2014.11.049
Lyu, C., Zhou, J., and Zhang, X., Effect of heat treatment on microstructure and impact toughness of a Tungsten-Molybdenum powder metallurgical high-speed steel, Mater. Sci. Eng., A, 2021, vol. 815, p. 141268. https://doi.org/10.1016/j.msea.2021.141268
Vorob’ev, Yu.P., Carbides in steels, Izv. Chelyabinsk. Nauchn. Tsentra Ural. Otd. Ross. Akad. Nauk, 2004, no. 2, pp. 33–59.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated by N. Rukk
Publisher’s Note.
Pleiades Publishing remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Akhmetov, A.S., Eremeeva, Z.V. Changes in the Microstructure and Hardness after Heat Treatment of a Billet Made of Powder High-Speed Steel R6M5K5 Containing a Diffusion-Alloyed Additive. Inorg. Mater. Appl. Res. 14, 1335–1339 (2023). https://doi.org/10.1134/S2075113323050027
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S2075113323050027