1. Phase Transformation Kinetics During Annealing of Cold-Rolled AISI 309Si Stainless Steel

   • Ata Abdi
   • Hamed Mirzadeh
   • Meysam Naghizadeh

   Communication 14 February 2020 Pages: 1955 - 1959

   

2. Martensite Enables the Formation of Complex Nanotwins in a Medium Mn Steel

   • B. B. He
   • M. X. Huang

   Communication 18 February 2020 Pages: 1960 - 1966

   

3. Enhanced Corrosion Behavior and Mechanical Properties of Al-Zn-Mg-Cu Sheet Alloy by Ultrasonic Surface Rolling Treatment

   • Chunming Wang
   • Guanming Xu
   • Tongxiang Liang

   Communication 27 February 2020 Pages: 1967 - 1971

   

4. Improved Tensile Strength of Al-5Ce Alloy by Permanent Magnet Stirring

   • Liyang Wang
   • Ruijuan Qi
   • Wenjiang Ding

   Communication 13 March 2020 Pages: 1972 - 1977

   

5. Pearlite in Multicomponent Steels: Phenomenological Steady-State Modeling

   • Jia-Yi Yan
   • John Ågren
   • Johan Jeppsson

   OriginalPaper Open access 26 February 2020 Pages: 1978 - 2001

   

6. Characterization and Interpretation of the Multiple Crystallographic Features of ε′ Precipitates in an Ag-Containing Mg-Sn Alloy

   • Xuefei Huang
   • Li Chen
   • Hui Wang

   OriginalPaper 19 February 2020 Pages: 2002 - 2010

   

7. Anomalous Dilatometric Response of Hot-Worked Ti-5Al-5Mo-5V-3Cr Alloy: In Terms of Evolution of Microstructure, Texture and Residual Stress

   • Mainak Sen
   • Sujoy Kumar Kar
   • Srikumar Banerjee

   OriginalPaper 12 March 2020 Pages: 2011 - 2024

   

8. Austenite Stability and Strain Hardening in C-Mn-Si Quenching and Partitioning Steels

   • Christopher B. Finfrock
   • Amy J. Clarke
   • Kester D. Clarke

   OriginalPaper 12 February 2020 Pages: 2025 - 2034

   

9. Alloy Composition Screening for Ni-Base Turbine Disc Superalloys Using the Creep Property of Single Crystal

   • Yuhi Mori
   • Kyoko Kawagishi
   • Ayako Ikeda

   OriginalPaper 25 February 2020 Pages: 2035 - 2043

   

10. Thickness-Dependent Mechanical Behavior of 〈111〉-Oriented Cu Single Crystals

    • Y. Yan
    • Y. L. Liu
    • X. W. Li

    OriginalPaper 21 February 2020 Pages: 2044 - 2052

    

11. Orientation Dependence of Deformation-Induced Martensite Transformation During Uniaxial Tensile Deformation of Carbide-Free Bainitic Steel

    • Sk. Md. Hasan
    • Abhijit Ghosh
    • Shiv Brat Singh

    OriginalPaper 05 March 2020 Pages: 2053 - 2063

    

12. Effect of Grain Size on the Shear Banding Behavior of Ti-6Al-4V Alloy Under Quasi-Static Compression

    • Yan Long
    • Liang Peng
    • Xiaolong Huang

    OriginalPaper 28 February 2020 Pages: 2064 - 2071

    

13. The Dependence of Fracture Resistance on the Size and Distribution of Blocky Retained Austenite-Martensite Constituents

    • Dezhen Yang
    • Zhiping Xiong

    OriginalPaper 05 March 2020 Pages: 2072 - 2083

    

14. Quantitative Analysis of Microstructures and Strength of Nb-Ti Microalloyed Steel with Different Ti Additions

    • Xiaolong Gan
    • Qing Yuan
    • Guang Xu

    OriginalPaper 11 March 2020 Pages: 2084 - 2096

    

15. Enhancement of Impact Toughness Via Tailoring Deformation Compatibility of Constituent Phases in Duplex Q&P Steel with Excellent Strength and Ductility

    • Hao Du
    • Yu Gong
    • Xuejun Jin

    OriginalPaper 09 March 2020 Pages: 2097 - 2117

    

16. Comparative Study of Hydrogen Embrittlement of Three Heat-resistant Cr-Mo Steels Subjected to Electrochemical and Gaseous Hydrogen Charging

    • Il Yoo
    • Ji-Min Lee
    • Byoungchul Hwang

    OriginalPaper 11 March 2020 Pages: 2118 - 2125

    

17. Mechanical and Metallurgical Characterization of Dissimilar P92/SS304 L Welded Joints Under Varying Heat Treatment Regimes

    • Chandan Pandey

    OriginalPaper 26 February 2020 Pages: 2126 - 2142

    

18. Characteristics of Susceptible Microstructure for Hydrogen-Induced Cracking in the Coarse-Grained Heat-Affected Zone of Carbon Steel

    • Yongjoon Kang
    • Minjeong Kim
    • Sangwoo Song

    OriginalPaper 18 February 2020 Pages: 2143 - 2153

    

19. Bonding Strength and Grain Size Control of Dissimilar Joints of Al-Mg Alloys with Forge Welding

    • Hideki Yamagishi
    • Masaru Sato
    • Shigeki Kakiuchi

    OriginalPaper 19 February 2020 Pages: 2154 - 2162

    

20. A Study on Microstructure and Phase Transformation in the Weld Fusion Zone of TIG-Welded IN939 with IN625 and IN718 as Filler Metal

    • H. Kazempour-Liasi
    • M. Tajally
    • H. Abdollah-Pour

    OriginalPaper 02 March 2020 Pages: 2163 - 2179

    

21. The Role of Internal Oxides on the Liquid Metal Embrittlement Cracking During Resistance Spot Welding of the Dual Phase Steel

    • A. Ghatei Kalashami
    • C. DiGiovanni
    • N. Y. Zhou

    OriginalPaper 06 March 2020 Pages: 2180 - 2191

    

22. Probe Pulse Conditions and Solidification Parameters for the Dissimilar Welding of Inconel 718 and AISI 316L Stainless Steel

    • A. K. Sahu
    • S. Bag

    OriginalPaper 11 March 2020 Pages: 2192 - 2208

    

23. Correlation of Local Constitutive Properties to Global Mechanical Performance of Advanced High-Strength Steel Spot Welds

    • H. Rezayat
    • H. Ghassemi-Armaki
    • S. S. Babu

    OriginalPaper 10 March 2020 Pages: 2209 - 2221

    

24. Microstructural Evolution of Dissimilar Metal Welds Involving Grade 91

    • Sean Orzolek
    • John DuPont
    • John Siefert

    OriginalPaper 12 March 2020 Pages: 2222 - 2238

    

25. Simulation of Shrinkage Porosity Formation During Alloy Solidification

    • Vahid Khalajzadeh
    • Christoph Beckermann

    OriginalPaper 10 March 2020 Pages: 2239 - 2254

    

26. Effect of Microstructure and Texture Evolution on the Electrochemical Corrosion Behavior of Warm-Rolled API 5L X70 Pipeline Steel

    • Enyinnaya Ohaeri
    • Joseph Omale
    • Fateh Fazeli

    OriginalPaper 22 February 2020 Pages: 2255 - 2275

    

27. Texture Evolution and Dynamic Recrystallization Behavior of Hybrid-Reinforced Titanium Matrix Composites: Enhanced Strength and Ductility

    • Peikun Qiu
    • Yuanfei Han
    • Weijie Lu

    OriginalPaper 21 February 2020 Pages: 2276 - 2290

    

28. Transient Plastic Flow and Phase Dissolution During Hot Compression of α/β Titanium Alloys

    • S. L. Semiatin
    • N. C. Levkulich
    • J. S. Tiley

    OriginalPaper 13 February 2020 Pages: 2291 - 2305

    

29. Microstructures and Nb-Rich Precipitation Behaviors of Inconel 718 Superalloy Under Sub-rapid Solidification Process

    • Wanlin Wang
    • Chenyang Zhu
    • Peisheng Lyu

    OriginalPaper 02 March 2020 Pages: 2306 - 2317

    

30. Nitrogen Effects in Additively Manufactured Martensitic Stainless Steels: Conventional Thermal Processing and Comparison with Wrought

    • Eric A. Lass
    • Fan Zhang
    • Carelyn E. Campbell

    OriginalPaper 09 March 2020 Pages: 2318 - 2332

    

31. Wetting Transition in a Molten Metal and Solid Substrate System in High Magnetic Fields

    • Yubao Xiao
    • Tie Liu
    • Qiang Wang

    OriginalPaper 13 March 2020 Pages: 2333 - 2343

    

32. Critical Analysis of Threshold Stresses in the Creep Mechanisms of a Powder Metallurgy Magnesium Alloy AZ31

    • Jorge A. del Valle
    • Oscar A. Ruano

    OriginalPaper 19 February 2020 Pages: 2344 - 2358

    

33. G–D Map Method for Analyzing Effects of Elements on Size Control of In Situ Formed Mg₂Si in Mg Melts

    • Zhuoran Tian
    • Zhibo Sun
    • Tongxiang Fan

    OriginalPaper 18 February 2020 Pages: 2359 - 2365

    

34. Development of (Nb_0.75,Ti_0.25)C-Reinforced Cast Duplex Stainless Steel Composites

    • Wen Hao Kan
    • Ziyan Man
    • Julie Cairney

    OriginalPaper 18 February 2020 Pages: 2366 - 2376

    

35. Experimental and Numerical Investigation of the Deformation and Fracture Mode of Microcantilever Beams Made of Cr(Re)/Al₂O₃ Metal–Matrix Composite

    • Witold Węglewski
    • Pandi Pitchai
    • Michał Basista

    OriginalPaper Open access 28 February 2020 Pages: 2377 - 2390

    

36. Further Insight into Interfacial Interactions in Iron/Liquid Zn-Al System

    • David Zapico-Álvarez
    • Patrick Barges
    • Marie-Laurence Giorgi

    OriginalPaper 18 February 2020 Pages: 2391 - 2403

    

37. Utilization of Waste Materials for the Manufacturing of Better-Quality Wear and Corrosion-Resistant Steels

    • Wen Hao Kan
    • Siyu Huang
    • Veena Sahajwalla

    OriginalPaper 28 February 2020 Pages: 2404 - 2410

    

38. Rapid Solidification Microstructure and Carbide Precipitation Behavior in Electron Beam Melted High-Speed Steel

    • J. Jin
    • R. Gao
    • B. Chen

    OriginalPaper Open access 11 February 2020 Pages: 2411 - 2429

    

39. Effect of Powder Recycling on Defect Formation in Electron Beam Melted Alloy 718

    • Hans Gruber
    • Cosmina Luchian
    • Lars Nyborg

    OriginalPaper Open access 19 February 2020 Pages: 2430 - 2443

    

40. The Influence of Iron in Minimizing the Microstructural Anisotropy of Ti-6Al-4V Produced by Laser Powder-Bed Fusion

    • Marco Simonelli
    • David Graham McCartney
    • Richard Hague

    OriginalPaper Open access 02 March 2020 Pages: 2444 - 2459

    

41. Realization of Selective Strengthening of Ferrite by Nb/V Microalloying in a Medium Carbon Lightweight δ-TRIP Steel

    • Lan Ye
    • Junfeng Wang
    • Xiaodong Wang

    OriginalPaper 19 February 2020 Pages: 2460 - 2468

    

42. Effects of Iron Addition on the Microstructures and Mechanical Properties of Two-Phase Ni₃Al-Ni₃V Intermetallic Alloys

    • Hikaru Kato
    • Satoshi Semboshi
    • Takayuki Takasugi

    OriginalPaper 14 February 2020 Pages: 2469 - 2479

    

43. Solution Annealing of Super Duplex Stainless Steel: Correlating Corrosion Performance with Grain Size and Phase-Specific Chemistry

    • Riya Mondal
    • A. Rajagopal
    • I. Samajdar

    OriginalPaper 18 February 2020 Pages: 2480 - 2494

    

44. Microstructural Instability and Precipitation Behaviors of Intermetallic Phases in a Nb-Containing CoNi-Based Superalloy

    • Zhongding Fan
    • Xinguang Wang
    • Chi Zhang

    OriginalPaper 12 March 2020 Pages: 2495 - 2508

    

45. Designing High Corrosion Resistant Peritectic Magnesium Alloys via Sc and Y Addition

    • Pengyu Zhao
    • Tian Xie
    • Xiaoqin Zeng

    OriginalPaper 02 March 2020 Pages: 2509 - 2522

    

46. Al₈Mn₅ in High-Pressure Die Cast AZ91: Twinning, Morphology and Size Distributions

    • G. Zeng
    • S. S. Shuai
    • C. M. Gourlay

    OriginalPaper 11 March 2020 Pages: 2523 - 2535

    

47. Facile In-Situ Synthesis of Freestanding 3D Nanoporous Cu@Cu₂O Hierarchical Nanoplate Arrays as Binder-Free Integrated Anodes for High-Capacity, Long-Life Li-Ion Batteries

    • Wenbo Liu
    • Peng Cheng
    • Sanqiang Shi

    OriginalPaper 14 February 2020 Pages: 2536 - 2548

    

48. Non-stoichiometry Effects and Phase Equilibria in the Uranium-Carbon-Nitrogen Ternary System

    • Artur A. Salamatin
    • Fei Peng
    • Konstantin G. Kornev

    OriginalPaper 28 February 2020 Pages: 2549 - 2563

    

49. Corrosion and Mechanical Performance of Grade 92 Ferritic-Martensitic Steel After Exposure to Supercritical Carbon Dioxide

    • Andrew Brittan
    • Jacob Mahaffey
    • Mark Anderson

    OriginalPaper 25 February 2020 Pages: 2564 - 2572

    

50. The Effect of Strain Rate and Temperature on the Mechanical Behavior of Al/Fe Interface Under Compressive Loading

    • Zeina G. El Chlouk
    • Mutasem A. Shehadeh
    • Ramsey F. Hamade

    OriginalPaper 09 March 2020 Pages: 2573 - 2589