1. Analysis of the Plasticity-Enhancing Mechanisms in 12 pctMn Austeno-ferritic Steel by In Situ Neutron Diffraction

   • Sangwon Lee
   • Wanchuck Woo
   • Bruno C. De Cooman

   Communication 04 October 2014 Pages: 5823 - 5828

   

2. The Role of Plasticity in the Transverse Lattice Strain Evolution of a Martensitic Steel

   • Dong-Feng Li
   • Brian J. Golden
   • Noel P. O’Dowd

   Communication 03 October 2014 Pages: 5829 - 5833

   

3. Foreword

   • Lukasz Madej
   • Maciej Pietrzyk

   Symposium: Multi-Scale Modeling of Microstructure Deformation in Material Processing 30 September 2014 Pages: 5834 - 5834

4. Conventional and Multiscale Modeling of Microstructure Evolution During Laminar Cooling of DP Steel Strips

   • Maciej Pietrzyk
   • Jan Kusiak
   • Rafał Gołąb

   Symposium: Multi-Scale Modeling of Microstructure Deformation in Material Processing Open access 25 June 2014 Pages: 5835 - 5851

   

5. Numerical Investigation of Influence of the Martensite Volume Fraction on DP Steels Fracture Behavior on the Basis of Digital Material Representation Model

   • Konrad Perzyński
   • Łukasz Madej
   • Peter D. Hodgson

   Symposium: Multi-Scale Modeling of Microstructure Deformation in Material Processing Open access 02 October 2014 Pages: 5852 - 5865

   

6. A Numerical Method for Microstructure Generation of a Binary Aluminum Alloy and Study of Its Mechanical Properties Using the Finite Element Method

   • Hamid Sharifi
   • Daniel Larouche

   Symposium: Multi-Scale Modeling of Microstructure Deformation in Material Processing 16 July 2014 Pages: 5866 - 5875

   

7. Foreword

   • Benjamin M. Morrow
   • Suveen N. Mathaudhu
   • Dallas R. Trinkle

   Symposium: Multiscale Perspectives on Plasticity in HCP Metals 26 September 2014 Pages: 5876 - 5876

8. Influence of Temperature on the Dynamic Tensile Behavior of Zirconium

   • Juan P. Escobedo
   • Ellen K. Cerreta
   • George T. Gray III

   Symposium: Multiscale Perspectives on Plasticity in HCP Metals 18 June 2014 Pages: 5877 - 5882

   

9. Modeling Twin Clustering and Strain Localization in Hexagonal Close-Packed Metals

   • Gábor Timár
   • João Quinta da Fonseca

   Symposium: Multiscale Perspectives on Plasticity in HCP Metals 12 September 2014 Pages: 5883 - 5890

   

10. Observations of the Atomic Structure of Tensile and Compressive Twin Boundaries and Twin–Twin Interactions in Zirconium

    • Benjamin M. Morrow
    • Rodney J. McCabe
    • Carlos N. Tomé

    Symposium: Multiscale Perspectives on Plasticity in HCP Metals 14 August 2014 Pages: 5891 - 5897

    

11. First Order Pyramidal Slip of \(1/3\ \langle 1\bar{2}10\rangle \) Screw Dislocations in Zirconium

    • Nermine Chaari
    • Emmanuel Clouet
    • David Rodney

    Symposium: Multiscale Perspectives on Plasticity in HCP Metals 30 September 2014 Pages: 5898 - 5905

    

12. Evaluation of Solute Clusters Associated with Bake-Hardening Response in Isothermal Aged Al-Mg-Si Alloys Using a Three-Dimensional Atom Probe

    • Yasuhiro Aruga
    • Masaya Kozuka
    • Tatsuo Sato

    OriginalPaper 18 September 2014 Pages: 5906 - 5913

    

13. Microstructural Evolution of the Interface Between Pure Titanium and Low Melting Point Zr-Ti-Ni(Cu) Filler Metals

    • Dongmyoung Lee
    • Juhyun Sun
    • Juhwa Hong

    OriginalPaper 01 October 2014 Pages: 5914 - 5922

    

14. Precipitate Rafting in a Polycrystalline Superalloy During Compression Creep

    • Arun Altincekic
    • Ercan Balikci

    OriginalPaper 26 September 2014 Pages: 5923 - 5936

    

15. Crystallographic Reconstruction Study of the Effects of Finish Rolling Temperature on the Variant Selection During Bainite Transformation in C-Mn High-Strength Steels

    • Nicolas Bernier
    • Lieven Bracke
    • Stéphane Godet

    OriginalPaper 16 September 2014 Pages: 5937 - 5955

    

16. In Situ Thermo-magnetic Investigation of the Austenitic Phase During Tempering of a 13Cr6Ni2Mo Supermartensitic Stainless Steel

    • A. Bojack
    • L. Zhao
    • J. Sietsma

    OriginalPaper 16 September 2014 Pages: 5956 - 5967

    

17. On the Roles of Oxidation and Vaporization in Surface Micro-structural Instability during Solution Heat Treatment of Ni-base Superalloys

    • Neil D’Souza
    • Dean Welton
    • Hang Wang

    OriginalPaper 13 September 2014 Pages: 5968 - 5981

    

18. Effects of Cooling Rate on Transformations in a Fe-9 Pct Ni Steel

    • Richard W. Fonda
    • George Spanos

    OriginalPaper 02 October 2014 Pages: 5982 - 5989

    

19. Characterization of Transformation Stasis in Low-Carbon Steels Microalloyed with B and Mo

    • Tadashi Furuhara
    • Kenji Tsuzumi
    • Genichi Shigesato

    OriginalPaper 30 September 2014 Pages: 5990 - 5996

    

20. The Impact of Strain Reversal on Microstructure Evolution and Orientation Relationships in Ti-6Al-4V with an Initial Alpha Colony Microstructure

    • K. Muszka
    • M. Lopez-Pedrosa
    • B. P. Wynne

    OriginalPaper Open access 30 September 2014 Pages: 5997 - 6007

    

21. Local and Global Stress–Strain Behaviors of Transformation-Induced Plasticity Steel Using the Combined Nanoindentation and Finite Element Analysis Method

    • Hyeok Jae Jeong
    • Nam Suk Lim
    • Hyoung Seop Kim

    OriginalPaper 09 September 2014 Pages: 6008 - 6015

    

22. The Effect of Long-Term Thermal Exposure on the Microstructure and Stress Rupture Property of a Directionally Solidified Ni-Based Superalloy

    • X. W. Jiang
    • D. Wang
    • J. Zhang

    OriginalPaper 17 September 2014 Pages: 6016 - 6026

    

23. Recrystallization Behavior of a Heavily Deformed Austenitic Stainless Steel During Iterative Type Annealing

    • B. Ravi Kumar
    • Sailaja Sharma

    OriginalPaper 05 September 2014 Pages: 6027 - 6038

    

24. Annealing Temperature Dependence of the Tensile Behavior of 10 pct Mn Multi-phase TWIP-TRIP Steel

    • Sangwon Lee
    • Bruno C. De Cooman

    OriginalPaper 05 September 2014 Pages: 6039 - 6052

    

25. Analysis of the Deformation Behavior in Tension and Tension-Creep of Ti-3Al-2.5V (wt pct) at 296 K and 728 K (23 °C and 455 °C) Using In Situ SEM Experiments

    • Hongmei Li
    • Carl J. Boehlert
    • Martin A. Crimp

    OriginalPaper 04 October 2014 Pages: 6053 - 6066

    

26. The Computational Design of W and Co-Containing Creep-Resistant Steels with Barely Coarsening Laves Phase and M₂₃C₆ as the Strengthening Precipitates

    • Qi Lu
    • Wei Xu
    • Sybrand van der Zwaag

    OriginalPaper 12 September 2014 Pages: 6067 - 6074

    

27. A Comparative Study on Dwell Fatigue of Ti-6Al-2Sn-4Zr-xMo (x = 2 to 6) Alloys on a Microstructure-Normalized Basis

    • Jianke Qiu
    • Yingjie Ma
    • Rui Yang

    OriginalPaper 05 September 2014 Pages: 6075 - 6087

    

28. Influence of Subsurface Structure on the Linear Reciprocating Sliding Wear Behavior of Steels with Different Microstructures

    • S. Sharma
    • S. Sangal
    • K. Mondal

    OriginalPaper 16 September 2014 Pages: 6088 - 6102

    

29. Stress Corrosion Cracking Behavior at Inconel and Low Alloy Steel Weld Interfaces

    • Yo Tomota
    • Shin Daikuhara
    • Shigeo Hattori

    OriginalPaper 26 September 2014 Pages: 6103 - 6117

    

30. Energy and Force Analysis of Ti-6Al-4V Linear Friction Welds for Computational Modeling Input and Validation Data

    • Anthony R. McAndrew
    • Paul A. Colegrove
    • Michael J. Russell

    OriginalPaper Open access 26 September 2014 Pages: 6118 - 6128

    

31. Relationship Between Microstructure, Strength, and Fracture in an Al-Zn-Mg Electron Beam Weld: Part I: Microstructure Characterization

    • Quentin Puydt
    • Sylvain Flouriot
    • Alexis Deschamps

    OriginalPaper 19 September 2014 Pages: 6129 - 6140

    

32. Relationship Between Microstructure, Strength, and Fracture in an Al-Zn-Mg Electron Beam Weld: Part II: Mechanical Characterization and Modeling

    • Quentin Puydt
    • Sylvain Flouriot
    • Alexis Deschamps

    OriginalPaper 19 September 2014 Pages: 6141 - 6152

    

33. Mechanism of Secondary Hardening in Rapid Tempering of Dual-Phase Steel

    • Dulal Chandra Saha
    • Sashank S. Nayak
    • Y. Zhou

    OriginalPaper 01 October 2014 Pages: 6153 - 6162

    

34. Effects of Thermal History and Microstructure on Segregation of Phosphorus and Alloying Elements in the Heat-Affected Zone of a Low Alloy Steel

    • Ziqing Zhai
    • Yuichi Miyahara
    • Yutaka Watanabe

    OriginalPaper 30 September 2014 Pages: 6163 - 6172

    

35. Pore Formation Upon Nitriding Iron and Iron-Based Alloys: The Role of Alloying Elements and Grain Boundaries

    • B. Schwarz
    • H. Göhring
    • E. J. Mittemeijer

    OriginalPaper 03 October 2014 Pages: 6173 - 6186

    

36. Relationship Between the Trace Elements and Graphite Growth Morphologies in Cast Iron

    • Haji Muhammad Muhmond
    • Hasse Fredriksson

    OriginalPaper 01 October 2014 Pages: 6187 - 6199

    

37. A Study of the Development of Chemical Heterogeneity in Large Forging Ingots: Depending Upon the Configuration and Thermophysical Conditions of Casting

    • Nikolai Zyuban
    • Dmitrii Rutskii
    • Sergei Gamanyuk

    OriginalPaper 30 September 2014 Pages: 6200 - 6206

    

38. Superplastic Forming of Multipass Friction Stir Processed Aluminum-Magnesium Alloy

    • S. Pradeep
    • Vivek Pancholi

    OriginalPaper 26 September 2014 Pages: 6207 - 6216

    

39. Microtexture Development of Niobium in a Multilayered Ti/Al/Nb Composite Produced by Accumulative Roll Bonding

    • Peng Qu
    • Liming Zhou
    • Viola L. Acoff

    OriginalPaper 13 September 2014 Pages: 6217 - 6230

    

40. The Effect of Forging Variables on the Supersolvus Heat-Treatment Response of Powder-Metallurgy Nickel-Base Superalloys

    • S. L. Semiatin
    • J. M. Shank
    • A. L. Pilchak

    OriginalPaper 26 September 2014 Pages: 6231 - 6251

    

41. Concurrent Growth of Kirkendall Pores and Vapor–Solid–Solid Protuberances on Ni Wires During Mo Vapor-Phase Deposition

    • Cong Wang
    • David C. Dunand

    OriginalPaper 30 September 2014 Pages: 6252 - 6259

    

42. An Experimental Investigation into Additive Manufacturing-Induced Residual Stresses in 316L Stainless Steel

    • Amanda S. Wu
    • Donald W. Brown
    • Wayne E. King

    OriginalPaper 16 September 2014 Pages: 6260 - 6270

    

43. Enhanced Electrical and Mechanical Properties of Alumina-Based TiC Composites by Spark Plasma Sintering

    • Kaleem Ahmad
    • Wei Pan

    OriginalPaper 12 September 2014 Pages: 6271 - 6276

    

44. Mechanical and Thermal Properties of Hot-Pressed ZrB₂-SiC Composites

    • Shirshendu Chakraborty
    • Debashish Debnath
    • Probal Kumar Das

    OriginalPaper 26 September 2014 Pages: 6277 - 6284

    

45. XPS Analysis of Ti6Al4V Oxidation Under UHV Conditions

    • M. Hierro-Oliva
    • A. M. Gallardo-Moreno
    • M. L. González-Martín

    OriginalPaper 19 September 2014 Pages: 6285 - 6290

    

46. Determining the Mechanism of In-Service Cylinder Distortion in Aluminum Engine Blocks with Cast-In Gray Iron Liners

    • Anthony Lombardi
    • Comondore Ravindran
    • Robert MacKay

    OriginalPaper 30 September 2014 Pages: 6291 - 6303

    

47. Texture Evolution and Twinning During the Expansion of Hot Extruded AZ31 + Sr Seamless Tubes

    • Alireza Sadeghi
    • Étienne Martin
    • Mihriban Pekguleryuz

    OriginalPaper 16 September 2014 Pages: 6304 - 6316

    

48. Effect of Nitrogen Content on Grain Refinement and Mechanical Properties of a Reversion-Treated Ni-Free 18Cr-12Mn Austenitic Stainless Steel

    • P. Behjati
    • A. Kermanpur
    • Y. -K. Lee

    OriginalPaper 09 October 2014 Pages: 6317 - 6328

    

49. Microstructure and Strengthening Mechanisms in an Ultrafine Grained Al-Mg-Sc Alloy Produced by Powder Metallurgy

    • Tammy J. Harrell
    • Troy D. Topping
    • Enrique J. Lavernia

    OriginalPaper 30 September 2014 Pages: 6329 - 6343

    

50. Nanostructure and Mechanical Properties of Bulk Al₈₆Ni₆Y₆Ce₂ Alloy Produced by Hot Consolidation of Amorphous Melt-Spun Flakes

    • M. Salehi
    • S. G. Shabestari
    • S. M. A. Boutorabi

    OriginalPaper 05 September 2014 Pages: 6344 - 6351