1. Parallel hybrid BBO-TS algorithm for QAP-formulation of FLP

   • Soumaya Lakehal
   • Abdelhakim Aitzai
   • Fatima Ghedjati

   ORIGINAL ARTICLE 08 May 2021 Pages: 3189 - 3209

   

2. Development of a cost-effective technique for batch production of precision wax patterns using 3D optical inspection and rapid tooling technologies

   • Chil-Chyuan Kuo
   • Yun-Ray Tasi
   • Zheng-Yu Yan

   ORIGINAL ARTICLE 26 August 2021 Pages: 3211 - 3227

   

3. A pre-compensation method for profile errors of screw rotors under precision form grinding

   • Lijia Tao
   • Mingxin Yuan
   • Haifeng Fang

   ORIGINAL ARTICLE 27 August 2021 Pages: 3229 - 3239

   

4. A novel method to eliminate the corona bond effect in detecting resistance spot welding joints based on ultrasonic vortex C-Scan technique

   • Bo Zhang
   • Baojun Zhang
   • Yitao Zhang

   ORIGINAL ARTICLE 27 August 2021 Pages: 3241 - 3252

   

5. The machining accuracy and surface roughness of mono-crystalline silicon regarding wire lag and wire stiffness of endless diamond wire

   • Jian Qiu
   • Chongning Liu
   • Shanbao Zhang

   ORIGINAL ARTICLE 27 August 2021 Pages: 3253 - 3265

   

6. Fused filament fabrication and mechanical performance of PVDF-based specialty thermoplastics

   • Farusil Najeeb Mullaveettil
   • Rolanas Dauksevicius
   • Valdas Grigaliunas

   ORIGINAL ARTICLE 27 August 2021 Pages: 3267 - 3280

   

7. Deep hole electrical discharge machining of nickel-based Inconel-718 alloy using response surface methodology

   • Shao-Hsien Chen
   • Kuo-Tai Huang

   ORIGINAL ARTICLE 27 August 2021 Pages: 3281 - 3295

   

8. Development of an adaptive template for fast detection of lithographic patterns of light-emitting diode chips

   • Wei-Han Weng
   • Chen-Yang Tsai
   • Chung-Feng Jeffrey Kuo

   ORIGINAL ARTICLE 27 August 2021 Pages: 3297 - 3321

   

9. A digital twin-based framework of manufacturing workshop for marine diesel engine

   • Zhongtai Hu
   • Xifeng Fang
   • Jie Zhang

   ORIGINAL ARTICLE 27 August 2021 Pages: 3323 - 3342

   

10. Dual-stage artificial neural network (ANN) model for sequential LBMM-μEDM-based micro-drilling

    • Wazed Ibne Noor
    • Tanveer Saleh
    • Mohamed Sultan Mohamed Ali

    ORIGINAL ARTICLE 27 August 2021 Pages: 3343 - 3365

    

11. Correction to: Dual-stage artificial neural network (ANN) model for sequential LBMM-μEDM-based micro-drilling

    • Wazed Ibne Noor
    • Tanveer Saleh
    • Mohamed Sultan Mohamed Ali

    Correction 21 September 2021 Pages: 3367 - 3367

12. Study on hole making process of thick-section CFRP

    • Jianping Li
    • Anyuan Jiao
    • Xiaomei Chen

    ORIGINAL ARTICLE 28 August 2021 Pages: 3369 - 3378

    

13. Tool path planning for five-axis U-pass milling of an impeller

    • Jingyang Feng
    • Zhaocheng Wei
    • Minglong Guo

    ORIGINAL ARTICLE 28 August 2021 Pages: 3379 - 3391

    

14. Stability analysis in turning with variable spindle speed based on the reconstructed semi-discretization method

    • Xinfeng Dong
    • Xinhang Shen
    • Zhifang Fu

    ORIGINAL ARTICLE 28 August 2021 Pages: 3393 - 3403

    

15. Improving surface quality using laser scanning and machining strategy combining powder bed fusion and machining processes

    • Tatsuaki Furumoto
    • Satoshi Abe
    • Akira Hosokawa

    ORIGINAL ARTICLE 28 August 2021 Pages: 3405 - 3413

    

16. Influence of electrode feed directions on EDM machining efficiency of deep narrow slots

    • Rui-Xue Zhang
    • Mo Chen
    • Wan-Sheng Zhao

    ORIGINAL ARTICLE 28 August 2021 Pages: 3415 - 3429

    

17. An efficient optimization method based on curvature feature for reducing tool path fluctuation

    • Ye Tian
    • ZhiTong Chen
    • Tao Ning

    ORIGINAL ARTICLE 29 August 2021 Pages: 3431 - 3446

    

18. Microstructure evolution mechanism of single and multi-pass in laser cladding based on heat accumulation effect for invar alloy

    • Shichao Zhu
    • Chenxiao Yu
    • Chao Zeng

    ORIGINAL ARTICLE 30 August 2021 Pages: 3447 - 3463

    

19. Effect of heat treatment on microstructure and mechanical characteristics of 316L stainless steel parts fabricated by hybrid additive and subtractive process

    • Shuoshuo Qu
    • Yadong Gong

    ORIGINAL ARTICLE 30 August 2021 Pages: 3465 - 3475

    

20. Experimental research on the top burr formation in micro milling

    • Xian Wu
    • Mingyang Du
    • Li Liu

    ORIGINAL ARTICLE 30 August 2021 Pages: 3477 - 3486

    

21. Optimization of cutting parameters for improving exit delamination, surface roughness, and production rate in drilling of CFRP composites

    • Qian Wang
    • Xiaoliang Jia

    ORIGINAL ARTICLE 30 August 2021 Pages: 3487 - 3502

    

22. A new approach to monitoring the operational success of shot peening with electromechanical impedance technique

    • Mesut Tekkalmaz
    • Ümit Er
    • Fatih Bozkurt

    ORIGINAL ARTICLE 30 August 2021 Pages: 3503 - 3513

    

23. A novel global sensitivity analysis method for vital geometric errors of five-axis machine tools

    • Jinwei Fan
    • Peitong Wang
    • Xingfei Ren

    ORIGINAL ARTICLE 30 August 2021 Pages: 3515 - 3527

    

24. Performance and mechanism of hole-making of CFRP/Ti-6Al-4V stacks using ultrasonic vibration helical milling process

    • Yuhe Zou
    • Guang Chen
    • Xuda Qin

    ORIGINAL ARTICLE 31 August 2021 Pages: 3529 - 3547

    

25. Fibre bridging and nozzle clogging in 3D printing of discontinuous carbon fibre-reinforced polymer composites: coupled CFD-DEM modelling

    • Hao Zhang
    • Lixing Zhang
    • Dongmin Yang

    ORIGINAL ARTICLE Open access 31 August 2021 Pages: 3549 - 3562

    

26. Informed machine learning-based machining parameter planning for aircraft structural parts

    • Tianchi Deng
    • Yingguang Li
    • Lihui Wang

    ORIGINAL ARTICLE 31 August 2021 Pages: 3563 - 3575

    

27. Penetration/keyhole status prediction and model visualization based on deep learning algorithm in plasma arc welding

    • Chuan-Bao Jia
    • Xin-Feng Liu
    • Chuan-Song Wu

    ORIGINAL ARTICLE 31 August 2021 Pages: 3577 - 3597

    

28. Experimental and simulated comparison of finite element models of bimetallic sheets for deep drawing process

    • Cengiz Görkem Dengiz
    • Kemal Yildizli

    ORIGINAL ARTICLE 31 August 2021 Pages: 3599 - 3614

    

29. Machining Digital Twin using real-time model-based simulations and lookahead function for closed loop machining control

    • Rob Ward
    • Chao Sun
    • Erdem Ozturk

    ORIGINAL ARTICLE Open access 01 September 2021 Pages: 3615 - 3629

    

30. Development of die-less single-tool multi-point plate forming technology for 3D curved shape

    • Song Wu
    • Ninshu Ma
    • Naoki Osawa

    ORIGINAL ARTICLE 01 September 2021 Pages: 3631 - 3646

    

31. Study on damage characteristics and ablation mechanism in fiber laser trepan drilling of 2.5D C_f/SiC composites

    • Chang Liu
    • Xianze Zhang
    • Tao Yang

    ORIGINAL ARTICLE 01 September 2021 Pages: 3647 - 3660

    

32. Research on breakage characteristics in side milling of titanium alloy with cemented carbide end mill

    • Yanjie Du
    • Caixu Yue
    • Steven Y. Liang

    ORIGINAL ARTICLE 01 September 2021 Pages: 3661 - 3679

    

33. Experimental investigation of electroplated CBN wheel with phyllotactic pattern part I: cylindrical-face grinding performance

    • Yueming Liu
    • Guimin Gao
    • Xingshan Li

    ORIGINAL ARTICLE 02 September 2021 Pages: 3681 - 3691

    

34. Dynamic modeling and experimental research on position-dependent behavior of twin ball screw feed system

    • Meng Duan
    • Hong Lu
    • Qi Liu

    ORIGINAL ARTICLE 02 September 2021 Pages: 3693 - 3703

    

35. Study on surface evenness of super-high-thickness cutting in high-speed wire electrical discharge machining

    • Cong Deng
    • Zhidong Liu
    • Mingbo Qiu

    ORIGINAL ARTICLE 02 September 2021 Pages: 3705 - 3715

    

36. Simulating convective-radiative heat sink effect by means of FEA-based Gaussian heat sources and its approximate analytical solutions for semi-infinite body

    • Ninh Nguyen
    • John H. Chujutalli

    ORIGINAL ARTICLE 02 September 2021 Pages: 3717 - 3742

    

37. Study on design, manufacture, and cutting performance of circular-arc milling cutters for machining titanium alloy

    • Chen Tao
    • Liu Gang
    • Wang Guangyue

    ORIGINAL ARTICLE 02 September 2021 Pages: 3743 - 3753

    

38. Theoretical and experimental studies of chatter in turning and machining stainless steel workpiece

    • Chen Liang
    • Shudong Yu
    • Jiayong Wei

    ORIGINAL ARTICLE 03 September 2021 Pages: 3755 - 3776

    

39. Prediction models for energy consumption and surface quality in stainless steel milling

    • Shuo Yu
    • Guoyong Zhao
    • Zhifu Zheng

    ORIGINAL ARTICLE 03 September 2021 Pages: 3777 - 3792

    

40. Research on chip formation mechanism and surface morphology of particle-reinforced metal matrix composites

    • Yuxin Fang
    • Youqiang Wang
    • Heng Luo

    ORIGINAL ARTICLE 03 September 2021 Pages: 3793 - 3804

    

41. Investigation of manufacturability and efficiency of micro channels with different geometries produced by direct metal laser sintering

    • Cemal İrfan Çalışkan
    • Mert Coşkun
    • Gökay Yöndem

    ORIGINAL ARTICLE 03 September 2021 Pages: 3805 - 3817

    

42. Drilling of a bidirectional jute fibre and cork-reinforced polymer biosandwich structure: ANN and RSM approaches for modelling and optimization

    • Zohir Tabet
    • Ahmed Belaadi
    • Mostefa Bourchak

    ORIGINAL ARTICLE 03 September 2021 Pages: 3819 - 3839

    

43. Improvement of the corrosion behavior of AISI 304L stainless steel by deep rolling treatment under cryogenic cooling

    • Khouloud Gharbi
    • Naoufel Ben Moussa
    • Nabil Ben Fredj

    ORIGINAL ARTICLE 03 September 2021 Pages: 3841 - 3857

    

44. Analysis of bimetal pipe bends with a bend of 0.7D with a cladding layer of Inconel 625

    • Martin Slany
    • Josef Sedlak
    • Zbynek Studeny

    Application 26 August 2021 Pages: 3859 - 3871

    

45. ViTroVo: in vitro assembly search for in vivo adaptive operator guidance

    • Corrado Grappiolo
    • Raimon Pruim
    • Paolo de Heer

    Application 31 August 2021 Pages: 3873 - 3893