Avoid common mistakes on your manuscript.
Correction to: The International Journal of Advanced Manufacturing Technology
The original article contained a mistake. Equation 3 in the article was miswritten. The corrected version is given in the following table.
Current version | Corrected version |
---|---|
\({\mathrm y}_{{\mathrm i}_{\mathrm{RMSE}}}=\frac{\sum_{\mathrm j=1}^{\mathrm N}({{\mathrm y}_{{{\mathrm i}_{\mathrm j}}_{\mathrm{actual}}}-{\mathrm y}_{{{\mathrm i}_{\mathrm j}}_{\mathrm{predicted}}})}^2}{\mathrm N}\) (3) | \({\mathrm{y}}_{{\mathrm{i}}_{\mathrm{RMSE}}}=\sqrt{\frac{\sum_{\mathrm{j}=1}^{\mathrm{N}}({{\mathrm{y}}_{{{\mathrm{i}}_{\mathrm{j}}}_{\mathrm{actual}}}-{\mathrm{y}}_{{{\mathrm{i}}_{\mathrm{j}}}_{\mathrm{predicted}}})}^{2} }{\mathrm{N}}}\) (3) |
The original article has been corrected.
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Noor, W.I., Saleh, T., Rashid, M.A.N. et al. Correction to: Dual-stage artificial neural network (ANN) model for sequential LBMM-μEDM-based micro-drilling. Int J Adv Manuf Technol 117, 3367 (2021). https://doi.org/10.1007/s00170-021-08038-7
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-021-08038-7