1. Thermal performance optimization of a sinusoidal wavy channel with different phase shifts using artificial bee colony algorithm

   • A. Ramiar
   • S. A. Manavi
   • P. Valinataj-Bahnemiri

   Technical Paper 04 June 2018 Article: 327

   

2. Numerical modeling of elastohydrodynamic lubrication of line contact lubricated with micropolar fluid

   • Suresh Jadhav
   • G. D. Thakre
   • Satish C. Sharma

   Technical Paper 04 June 2018 Article: 326

   

3. Modelling and analysis of the unsteady flow and heat transfer of immiscible micropolar and Newtonian fluids through a pipe of circular cross section

   • M. Devakar
   • Ankush Raje

   Technical Paper 02 June 2018 Article: 325

   

4. Impedance boundary conditions for a time-domain finite-point method

   • Carlos Spa
   • Ricardo Rivas
   • Luis Pérez

   Technical Paper 02 June 2018 Article: 324

   

5. Research on drum shearer speed control strategies under sudden-changing load

   • Jianjun Hu
   • Junlin Zha
   • Chengjie Sun

   Technical Paper Open access 01 June 2018 Article: 323

   

6. Experimental investigations on the incremental sheet forming of commercial steel ASTM A653 CS-A G90 to predict maximum bending effort

   • Pablo D. Valle
   • Fred Lacerda Amorim
   • Paulo V. P. Marcondes

   Technical Paper 31 May 2018 Article: 322

   

7. A two-dimensional lattice Boltzmann study of flow past five side-by-side rectangular cylinders

   • Shams Ul Islam
   • Hamid Rahman
   • Zhou Chao Ying

   Technical Paper 31 May 2018 Article: 321

   

8. Numerical/analytical solutions to the elastic response of arbitrarily functionally graded polar orthotropic rotating discs

   • Vebil Yıldırım

   Technical Paper 31 May 2018 Article: 320

   

9. Optimization of a composite quadrupole mass at high-speed rotation

   • C. Frajuca
   • M. A. Souza
   • F. Y. Nakamoto

   Technical Paper 30 May 2018 Article: 319

   

10. Investigation on controlling the process parameters for improving the quality of investment cast parts

    • Sarojrani Pattnaik

    Technical Paper 30 May 2018 Article: 318

    

11. An extension of Oberbeck–Boussinesq approximation for thermal convection problems

    • Bernardo Alan de Freitas Duarte
    • Rafael Romão da Silva Melo
    • Aristeu da Silveira Neto

    Technical Paper 30 May 2018 Article: 317

    

12. Characterization of high-carbon high-chromium tool steel/low-carbon steel friction-welded joints for industrial tooling applications

    • T. Packiaraj Rajendran
    • N. Rajesh Jesudoss Hynes
    • T. Christopher

    Technical Paper 29 May 2018 Article: 316

    

13. Computational and experimental investigation of fluidic thrust vectoring actuator

    • S. M. Ahmad
    • S. M. Siddique
    • M. A. Alam

    Technical Paper 29 May 2018 Article: 315

    

14. Combined effects of fluid–solid interfacial slip and fluid inertia on the hydrodynamic performance of square shape textured parallel sliding contacts

    • Ismail Syed
    • M. Sarangi

    Technical Paper 29 May 2018 Article: 314

    

15. Structural optimization of wind turbine blades with ring shear webs

    • Jie Meng
    • Dagang Sun

    Technical Paper 28 May 2018 Article: 313

    

16. Modeling dissipative heating of hydraulic dampers under consideration of stochastic uncertainties in their geometric parameters

    • Ke Chen
    • Xiaopeng Yu
    • Rui Wu

    Technical Paper 26 May 2018 Article: 312

    

17. Experimental optimisation of the tribological behaviour of Al/SiC/Gr hybrid composites based on Taguchi’s method and artificial neural network

    • Blaža Stojanović
    • Aleksandar Vencl
    • Jasmina Skerlić

    Technical Paper 26 May 2018 Article: 311

    

18. Parametric study on the dry sliding wear behaviour of AA6082–T6/TiB₂ in situ composites using response surface methodology

    • Gurpreet Singh
    • Sammy Lap-Ip Chan
    • Neeraj Sharma

    Technical Paper 26 May 2018 Article: 310

    

19. Multiple cracks analysis in a FG orthotropic layer with FGPM coating under anti-plane loading

    • R. Sourki
    • S. Ilyaei
    • M. M. Monfared

    Technical Paper 25 May 2018 Article: 309

    

20. Analysis of the influence of pellet-to-cladding gap on the transient heat transfer in nuclear fuel rods via the integral transform technique

    • Filipe Alcântara Soares
    • Rodrigo Otávio de Castro Guedes
    • Francesco Scofano Neto

    Review 25 May 2018 Article: 308

    

21. Modeling of unsteady non-Newtonian blood flow through a stenosed artery: with nanoparticles

    • A. Zaman
    • Ambreen Afsar Khan
    • N. Ali

    Technical Paper 24 May 2018 Article: 307

    

22. Formation control of multirotor aerial vehicles using decentralized MPC

    • Ícaro Bezerra Viana
    • Davi Antônio dos Santos
    • Luiz Carlos Sandoval Góes

    Original Paper 24 May 2018 Article: 306

    

23. Effectiveness of magnetic field on the flow of Jeffrey fluid in an annulus with rotating concentric cylinders

    • Deepak Kumar
    • K. Ramesh
    • Sumit Chandok

    Technical Paper 23 May 2018 Article: 305

    

24. Analysis of non-Hertz contact stress and bearing capacity on meshing pairs in a real-time non-clearance precision ball transmission

    • Pengfei Sun
    • Zijun An
    • Wei Jiang

    Technical Paper 22 May 2018 Article: 304

    

25. Nanofluids for heat transfer applications: a review

    • Tiago Augusto Moreira
    • Debora Carneiro Moreira
    • Gherhardt Ribatski

    Review 22 May 2018 Article: 303

    

26. Mechanics analysis for the main bearing of the rotating drum in the concrete mixing truck

    • Jiapeng Yang
    • Qi An

    Technical Paper 22 May 2018 Article: 302

    

27. Controlling interfacial mixing zone for microfluidic flow of liquid streams

    • Paritosh Agnihotri
    • V. N. Lad

    Technical Paper 21 May 2018 Article: 301

    

28. Comparative study of two geometrical acoustic simulation models

    • Julio Cesar B. Torres
    • Lukas Aspöck
    • Michael Vorländer

    Technical Paper 21 May 2018 Article: 300

    

29. Machining of fluidic channels on borosilicate glass using grinding-aided electrochemical discharge engraving (G-ECDE) and process optimization

    • V. G. Ladeesh
    • R. Manu

    Technical Paper 21 May 2018 Article: 299

    

30. Nonlinear aeroelastic analysis of high-aspect-ratio wings using indicial aerodynamics

    • Mahdi Nejati
    • Saeed Shokrollahi
    • Shahrokh Shams

    Technical Paper 19 May 2018 Article: 298

    

31. MCF-7 cancer cell apparent properties and viscoelastic characteristics measurement using AFM

    • Moharram Habibnejad Korayem
    • Y. H. Sooha
    • Z. Rastegar

    Technical Paper 16 May 2018 Article: 297

    

32. Effect of thickness stretching on the static deformations, natural frequencies, and critical buckling loads of laminated composite and sandwich beams

    • Atteshamuddin Shamshuddin Sayyad
    • Yuwaraj Marotrao Ghugal

    Technical Paper 15 May 2018 Article: 296

    

33. Influence of reversing impact load on performance of a two-step unloading pilot-operated check valves

    • Jiyun Zhao
    • Lei Liu

    Technical Paper 14 May 2018 Article: 295

    

34. Dry sliding wear characterization of red mud reinforced aluminium composite

    • Amit Sharma
    • R. M. Belokar
    • Sanjeev Kumar

    Technical Paper 14 May 2018 Article: 294

    

35. Forced convection film boiling heat transfer model for a sphere by scaling analysis

    • Dipak Chandra Das
    • Koushik Ghosh
    • Dipankar Sanyal

    Technical Paper 14 May 2018 Article: 293

    

36. Fabrication of LM 25/WC functionally graded composite for automotive applications and investigation of its mechanical and wear properties

    • R. Jojith
    • N. Radhika

    Technical Paper 11 May 2018 Article: 292

    

37. Optimization of processing parameters of cooling slope process for semi-solid casting of ADC 12 Al alloy

    • Sujeet Kumar Gautam
    • Nilrudra Mandal
    • Goutam Sutradhar

    Technical Paper 11 May 2018 Article: 291

    

38. Modeling of emerged semi-circular breakwater performance against solitary waves using SPH method

    • Amin Fathi
    • Mohammad Javad Ketabdari

    Technical Paper 11 May 2018 Article: 290

    

39. Study of internal flow of a bipropellant swirl injector of a rocket engine

    • Julio R. Ronceros Rivas
    • Amílcar Porto Pimenta
    • Marie C. Girón Suazo

    Technical Paper 11 May 2018 Article: 289

    

40. Assessment of two immersed boundary methods for flow over thin plates and sharp edges

    • João Rodrigo Andrade
    • Ramon Silva Martins
    • João Marcelo Vedovoto

    Technical Paper 11 May 2018 Article: 288

    

41. Comparison of full 3D, shell/3D and inherent deformation numerical methods for prediction of out-of-plane welding-induced distortion

    • Amin Rezaei
    • Eslam Ranjbarnodeh
    • Mehdi Iranmanesh

    Technical Paper 10 May 2018 Article: 287

    

42. Calculating the aortic valve force and generated power by a specific cardiac assist device (AVICENA) in different counterpulsation

    • Mansour Alizadeh
    • Shahrokh Rahmani
    • Pedram Tehrani

    Technical Paper 09 May 2018 Article: 286

    

43. Self-ignition of dust cloud in a hot gas

    • Saad A. El-Sayed

    Technical Paper 08 May 2018 Article: 285

    

44. Galling characterization for the pair composed by aluminium and M2 steel under dry and lubricated conditions by using load-scanning test method

    • L. M. Vilhena
    • P. V. Antunes
    • A. Ramalho

    Technical Paper 08 May 2018 Article: 284

    

45. Implementation of fuzzy logic approach to estimate the degree of expulsion and spattering index and weld strength in projection welding

    • Kaan Yetilmezsoy
    • Cemil Gunhan Erhuy
    • Mehmet Burak Bilgin

    Technical Paper 07 May 2018 Article: 283

    

46. Control strategy of energy saving for power system in hydraulic surface drilling rig

    • Liang Xiangjing
    • Wu wanrong

    Technical Paper 07 May 2018 Article: 282

    

47. Free vibration and buckling investigation of piezoelectric nano-plate in elastic medium considering nonlocal effects

    • Mohsen Bastami
    • Bashir Behjat

    Technical Paper 07 May 2018 Article: 281

    

48. Numerical simulation of a metallic load in continuous movement during heating in an experimental vertical-type furnace

    • Sixtos Antonio Arreola-Villa
    • Gildardo Solorio-Díaz
    • Octavio Vázquez-Goméz

    Technical Paper 07 May 2018 Article: 280

    

49. 3D finite element analysis of slot milling of unidirectional glass fiber reinforced polymer composites

    • C. Prakash
    • K. S. Vijay Sekar

    Technical Paper 07 May 2018 Article: 279

    

50. Automation of multi-fault diagnosing of centrifugal pumps using multi-class support vector machine with vibration and motor current signals in frequency domain

    • Janani Shruti Rapur
    • Rajiv Tiwari

    Technical Paper 05 May 2018 Article: 278