Experimental optimisation of the tribological behaviour of Al/SiC/Gr hybrid composites based on Taguchi’s method and artificial neural network
- 23 Downloads
This paper presents the investigation of tribological behaviour of aluminium hybrid composites with Al–Si alloy A356 matrix, reinforced with 10 wt% silicon carbide and 0, 1 and 3 wt% graphite (Gr) with the application of Taguchi’s method. Tribological investigations were realized on block-on-disc tribometer under lubricated sliding conditions, at three sliding speeds (0.25, 0.5 and 1 m/s), three normal loads (40, 80 and 120 N) and at sliding distance of 2400 m. Wear rate and coefficient of friction were measured within the research. Analysis of the results was conducted using ANOVA technique, and it showed that the smallest values of wear and friction are observed for hybrid composite containing 3 wt% Gr. The prediction of wear rate and coefficient of friction was performed with the use of artificial neural network (ANN). After training of the ANN, the regression coefficient was obtained and it was equal to 0.98905 for the network with architecture 3-20-30-2.
KeywordsA356 Hybrid composites Compocasting Lubricated sliding Friction Wear Taguchi method Artificial neural network Analysis of variance
This work has been performed as a part of activities within the projects TR 35021 and TR 34028. These projects are supported by the Republic of Serbia, Ministry of Education, Science and Technological Development, whose financial help is gratefully acknowledged. Collaboration through the bilateral project No. 451-03-02294/2015-09/9 between Republic of Serbia and Hungary is also acknowledged.
Compliance with ethical standards
Conflict of interest
The authors declare that they have no conflict of interest.
- 1.Vencl A (2012) Tribology of the Al–Si alloy based MMCs and their application in automotive industry. In: Magagnin L (ed) Engineered metal matrix composites: forming methods, material properties and industrial applications. Nova Science Publishers, New York, pp 127–166Google Scholar
- 2.Stojanović BŽ, Milojević ST (2017) Characterization, manufacturing and application of metal matrix composites. In: Wythers MC (ed) Advances in materials science research, vol 30. Nova Science Publishers, New York, pp 83–113Google Scholar
- 3.Stojanovic B, Glisovic J (2016) Automotive engine materials. In: Hashmi S (ed) Reference module in materials science and materials engineering. Elsevier, Oxford, pp 1–9Google Scholar
- 5.Stojanovic B, Babic M, Mitrovic S, Vencl A, Miloradovic N, Pantic M (2013) Tribological characteristics of aluminium hybrid composites reinforced with silicon carbide and graphite. A review. J Balkan Tribol Assoc 19(1):83–96Google Scholar
- 7.Stojanović B, Veličković S, Vencl A, Babić M, Petrović N, Miladinović S, Cherkezova-Zheleva Z (2016) Optimization and prediction of aluminium composite wear using Taguchi design and artificial neural network. Tribol J BULTRIB 6:38–45Google Scholar
- 12.Taşdelen ME, Dağaşan E, Gerçekcioğlu E (2016) Prediction of tribological behavior of TiN coated hot work steel at high temperatures using artificial neural network. J Balkan Tribol Assoc 22(2A-I):1808–1820Google Scholar
- 19.Montgomery DC (2007) Design and analysis of experiments. Wiley, New DelhiGoogle Scholar