1. Failure in single point incremental forming

   • T. Madeira
   • C. M. A. Silva
   • P. A. F. Martins

   ORIGINAL ARTICLE 19 April 2015 Pages: 1471 - 1479

2. Finite element analysis of the thermal effect in high-speed blanking of thick sheet metal

   • Dao-Chun Hu
   • Min-He Chen
   • Li-Ming Yin

   ORIGINAL ARTICLE 19 April 2015 Pages: 1481 - 1487

3. Microstructure, tribological and mechanical strengthening effect of multiphase Zn/ZrO₂-SiC electrodeposited composite coatings

   • O. S. I. Fayomi
   • A. P. I. Popoola
   • T. Adekeye

   ORIGINAL ARTICLE 21 April 2015 Pages: 1489 - 1495

4. Forming limit prediction of anisotropic material subjected to normal and through thickness shear stresses using a modified M–K model

   • Afshin Fatemi
   • Bijan Mollaei Dariani

   ORIGINAL ARTICLE 22 April 2015 Pages: 1497 - 1509

5. Investigation of increased removal rate during polishing of single-crystal silicon carbide

   • M. Y. Tsai
   • S. M. Wang
   • T. S. Yeh

   ORIGINAL ARTICLE 22 April 2015 Pages: 1511 - 1520

6. Assessing the impact of changing available multiple process plans of a job type on mean tardiness in job shop scheduling

   • Rakesh Kumar Phanden
   • Ajai Jain

   ORIGINAL ARTICLE 22 April 2015 Pages: 1521 - 1545

7. The skipping strategy to reduce the effect of the autocorrelation on the T ² chart’s performance

   • Roberto Campos Leoni
   • Antonio Fernando Branco Costa
   • Marcela Aparecida Guerreiro Machado

   ORIGINAL ARTICLE 23 April 2015 Pages: 1547 - 1559

8. Monitoring the coefficient of variation using a variable sample size control chart

   • Philippe Castagliola
   • Ali Achouri
   • Stelios Psarakis

   ORIGINAL ARTICLE 23 April 2015 Pages: 1561 - 1576

9. Improvement of dimensional uniformity on micro-dimple arrays generated by electrochemical micro-machining with an auxiliary electrode

   • Xiaolei Chen
   • Ningsong Qu
   • Hansong Li

   ORIGINAL ARTICLE 23 April 2015 Pages: 1577 - 1585

10. Designing vibratory linear feeders through an inverse dynamic structural modification approach

    • R. Caracciolo
    • D. Richiedei
    • G. Zanardo

    ORIGINAL ARTICLE 23 April 2015 Pages: 1587 - 1599

11. Three-dimensional vision applications in GTAW process modeling and control

    • XueWu Wang

    ORIGINAL ARTICLE 23 April 2015 Pages: 1601 - 1611

12. Study on improving the trajectory to elevate the surface quality of plane magnetic abrasive finishing

    • A. Y. Jiao
    • H. J. Quan
    • Y. H. Zou

    ORIGINAL ARTICLE 23 April 2015 Pages: 1613 - 1623

13. Optimal tolerance allocation for precision machine tools in consideration of measurement and adjustment processes in assembly

    • Junkang Guo
    • Zhigang Liu
    • Jun Hong

    ORIGINAL ARTICLE 23 April 2015 Pages: 1625 - 1640

14. The mechanism and application of bronze-bond diamond grinding wheel pulsed laser dressing based on phase explosion

    • Cai Song
    • Chen Genyu
    • Deng Hui

    ORIGINAL ARTICLE 23 April 2015 Pages: 1641 - 1653

15. Effect of friction stir processing parameters on the microstructural and electrical properties of copper

    • R. M. Leal
    • I. Galvão
    • D. M. Rodrigues

    ORIGINAL ARTICLE 23 April 2015 Pages: 1655 - 1663

16. Suitability of PEG/PMMA-based metal injection moulding feedstock: an experimental study

    • Muhammad Dilawer Hayat
    • Tao Li
    • Peng Cao

    ORIGINAL ARTICLE 23 April 2015 Pages: 1665 - 1671

17. An adaptive uniform toolpath generation method for the automatic polishing of complex surfaces with adjustable density

    • Yuwen Sun
    • Deyang Feng
    • Dongming Guo

    ORIGINAL ARTICLE 24 April 2015 Pages: 1673 - 1683

18. An exploration of an abrasive water jet cutting front profile

    • Shijin Zhang
    • Yuqiang Wu
    • Shu Wang

    ORIGINAL ARTICLE 24 April 2015 Pages: 1685 - 1688

19. Effects of processing parameters on the surface quality of square section die-less spinning

    • Z. Jia
    • Z. R. Han
    • Q. M. Kong

    ORIGINAL ARTICLE 24 April 2015 Pages: 1689 - 1700

20. Laminated fabrication of 3D queue micro-electrode and its application in micro-EDM

    • Bin Xu
    • Xiao-yu Wu
    • Zhen-long Wang

    ORIGINAL ARTICLE 24 April 2015 Pages: 1701 - 1711

21. Ablation and morphological evolution of micro-holes in stainless steel with picosecond laser pulses

    • Wanqin Zhao
    • Wenjun Wang
    • Xuesong Mei

    ORIGINAL ARTICLE 24 April 2015 Pages: 1713 - 1720

22. Integration strategy of on-machine measurement (OMM) and numerical control (NC) machining for the large thin-walled parts with surface correlative constraint

    • H. B. Liu
    • Y. Q. Wang
    • D. M. Guo

    ORIGINAL ARTICLE 25 April 2015 Pages: 1721 - 1731

23. Improvement of abrasive water jet machining accuracy for titanium and TiNb alloy

    • Libor M. Hlaváč
    • Lucie Gembalová
    • Irena M. Hlaváčová

    ORIGINAL ARTICLE 25 April 2015 Pages: 1733 - 1740

24. The decoupling visual feature extraction of dynamic three-dimensional V-type seam for gantry welding robot

    • Haiyong Chen
    • Weipeng Liu
    • Hexu Sun

    ORIGINAL ARTICLE 25 April 2015 Pages: 1741 - 1749

25. Determining the minimum clamping force by cutting force simulation in aerospace fuselage pocket machining

    • A. Mahmud
    • J. R. R Mayer
    • L. Baron

    ORIGINAL ARTICLE 26 April 2015 Pages: 1751 - 1758

26. Fast tool servo diamond turning of optical freeform surfaces for rear-view mirrors

    • Fujing Tian
    • Ziqiang Yin
    • Shengyi Li

    ORIGINAL ARTICLE 26 April 2015 Pages: 1759 - 1765

27. Forming appearance analysis in multi-layer single-pass GMAW-based additive manufacturing

    • Jun Xiong
    • Guangjun Zhang
    • Weihua Zhang

    ORIGINAL ARTICLE 26 April 2015 Pages: 1767 - 1776

28. A novel ISO 6983 interpreter for open architecture CNC systems

    • Yusri Yusof
    • Kamran Latif

    OriginalPaper 26 April 2015 Pages: 1777 - 1786

29. Selective laser melting of Al-Fe-V-Si heat-resistant aluminum alloy powder: modeling and experiments

    • Shaobo Sun
    • Lijing Zheng
    • Hu Zhang

    ORIGINAL ARTICLE 26 April 2015 Pages: 1787 - 1797

30. A macro–micro compensation method for straightness motion error and positioning error of an improved linear stage

    • Yongjun Deng
    • Xin Jin
    • Zhijing Zhang

    ORIGINAL ARTICLE 26 April 2015 Pages: 1799 - 1806

31. The microstructure and properties change of dies manufactured by bimetal-gradient-layer surfacing technology

    • Jiansheng Zhang
    • Jie Zhou
    • Mengyao Li

    ORIGINAL ARTICLE 26 April 2015 Pages: 1807 - 1814

32. Employing preheating- and cooling-assisted technologies in machining of Inconel 718 with ceramic cutting tools: towards reducing tool wear and improving surface integrity

    • Kejia Zhuang
    • Xiaoming Zhang
    • Han Ding

    ORIGINAL ARTICLE 26 April 2015 Pages: 1815 - 1822

33. Influence of dynamic effects on surface roughness for face milling process

    • Shi Zhenyu
    • Liu Luning
    • Liu Zhanqiang

    ORIGINAL ARTICLE 26 April 2015 Pages: 1823 - 1831

34. Study on the adhering failure mechanism of cemented carbide inserts and element diffusion model during the heavy-duty cutting of water chamber head

    • Yaonan Cheng
    • Li Liu
    • Tong Wang

    ORIGINAL ARTICLE 26 April 2015 Pages: 1833 - 1842

35. Multi-scale statistical signal processing of cutting force in cutting tool condition monitoring

    • Dong Gao
    • Zhirong Liao
    • Yong Lu

    ORIGINAL ARTICLE 30 April 2015 Pages: 1843 - 1853

36. Research on belt grinding for marine propeller blade based on the second-order osculation

    • Bo Hou
    • Yongqing Wang
    • Haibo Liu

    ORIGINAL ARTICLE 30 April 2015 Pages: 1855 - 1862

37. Spark erosion machining of miniature gears: a critical review

    • Kapil Gupta
    • N. K. Jain
    • R. F. Laubscher

    ORIGINAL ARTICLE 30 April 2015 Pages: 1863 - 1877

38. NC codes optimization for geometric error compensation of five-axis machine tools with one novel mathematical model

    • Guoqiang Fu
    • Jianzhong Fu
    • Zichen Chen

    ORIGINAL ARTICLE 30 April 2015 Pages: 1879 - 1894

39. Experimental investigation into tool aging effect in ball end magnetorheological finishing

    • Mahendra Singh Niranjan
    • Sunil Jha

    ORIGINAL ARTICLE 01 May 2015 Pages: 1895 - 1902

40. Robot base frame calibration with a 2D vision system for mobile robotic drilling

    • Biao Mei
    • Weidong Zhu
    • Yinglin Ke

    ORIGINAL ARTICLE 01 May 2015 Pages: 1903 - 1917

41. Investigation on the effects of SiC particle addition in the weld zone during friction stir welding of Al 6351 alloy

    • P. Karthikeyan
    • K. Mahadevan

    ORIGINAL ARTICLE 01 May 2015 Pages: 1919 - 1926

42. A study on chip shape and chip-forming mechanism in grinding of high volume fraction SiC particle reinforced Al-matrix composites

    • Shutao Huang
    • Xiaolin Yu
    • Lifu Xu

    ORIGINAL ARTICLE 01 May 2015 Pages: 1927 - 1932

43. Characterization and modeling of anisotropic SL pattern during investment casting process

    • H. Li
    • J. Chen
    • V. L. Richards

    ORIGINAL ARTICLE 01 May 2015 Pages: 1933 - 1943

44. Development and validation of a nonlinear dynamic impact model for a notch impact

    • Espen G. Lund
    • Mladen Jecmenica
    • Hamid Reza Karimi

    ORIGINAL ARTICLE 01 May 2015 Pages: 1945 - 1955

45. Cathode design and experimental study on the rotate-print electrochemical machining of revolving parts

    • Zengwei Zhu
    • Dengyong Wang
    • Di Zhu

    ORIGINAL ARTICLE 01 May 2015 Pages: 1957 - 1963

46. A novel linear virtual temperature constructing method for thermal error modeling of machine tools

    • Chengxin Zhang
    • Feng Gao
    • Yan Li

    ORIGINAL ARTICLE 01 May 2015 Pages: 1965 - 1973

47. Microstructures and mechanical properties of 30Cr-4Mo ferritic stainless steel joints produced by double-pulsed gas metal arc welding

    • Heng Zhang
    • Shengsun Hu
    • Fengliang Yin

    ORIGINAL ARTICLE 01 May 2015 Pages: 1975 - 1983

48. Analysis of PCBN tool failure mechanisms in face milling of hardened steel using damage equivalent stress

    • Xiaobin Cui
    • Jingxia Guo
    • Yanyan Yan

    ORIGINAL ARTICLE 01 May 2015 Pages: 1985 - 1994

49. Joinability of different thermoplastic polymers with aluminium AA6082 sheets by mechanical clinching

    • F. Lambiase

    ORIGINAL ARTICLE 01 May 2015 Pages: 1995 - 2006

50. Investigation of droplet transfer behaviours in cold metal transfer (CMT) process on welding Ti-6Al-4V alloy

    • Zhe Sun
    • Yaohui Lv
    • Kaibo Wang

    ORIGINAL ARTICLE 01 May 2015 Pages: 2007 - 2014