Skip to main content
SpringerLink
Log in

Effects of processing parameters on the surface quality of square section die-less spinning

  • ORIGINAL ARTICLE
  • Published:
The International Journal of Advanced Manufacturing Technology Aims and scope Submit manuscript

Abstract

In view of the importance of the surface quality in the application to the square section die-less spinning, the effects of several key parameters which include roller path, half-cone angle, and roller nose radius on the surface quality are investigated. Through the geometric model of residual height, the effect law of the roller path is obtained: the surface quality increases with the decrease of the axial distance of two adjacent slices. Then the finite element model of the square section die-less spinning is established, and the normal force and axial strain states in the deforming process are adopted to predict the relationship between the surface quality and the half-cone angle. Combined with the residual height model and finite element analysis, the roller nose radius’ effect on the surface quality is also obtained. Enlargement of the two parameters can improve the surface quality. All the analysis results are verified by the surface waviness test of the specimens from the workpiece after spinning.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Similar content being viewed by others

References

  1. Music O, Allwood JM, Kawai K (2010) A review of the mechanics of metal spinning. J Mater Process Technol 210(1):3–23

    Article  Google Scholar 

  2. Kang DC, Gao XC, Meng XF, Wang ZH (1999) Study on the deformation mode of conventional spinning of plates. J Mater Process Technol 91(1):226–230

    Article  Google Scholar 

  3. Molladavoudi HR, Djavanroodi F (2011) Experimental study of thickness reduction effects on mechanical properties and spinning accuracy of aluminum 7075-O, during flow forming. Int J Adv Manuf Technol 52(9–12):949–957

    Article  Google Scholar 

  4. Gao XC, Kang DC, Meng XF, Wu HJ (1999) Experimental research on a new technology—ellipse spinning. J Mater Process Technol 94(2):197–200

    Article  Google Scholar 

  5. Xia Q, Shima S, Kotera H, Yasuhuku D (2005) A study of the one-path deep drawing spinning of cups. J Mater Process Technol 159(3):397–400

    Article  Google Scholar 

  6. Xia QX, Cheng XQ, Hu Y, Ruan F (2006) Finite element simulation and experimental investigation on the forming forces of 3D non-axisymmetrical tubes spinning. Int J Mech Sci 48(7):726–735

    Article  Google Scholar 

  7. Xia QX, Xie SW, Huo YL, Ruan F (2008) Numerical simulation and experimental research on the multi-pass neck-spinning of non-axisymmetric offset tube. J Mater Process Technol 206(1–3):500–508

    Article  Google Scholar 

  8. BAI Q, YANG H, Zhan M (2008) Finite element modeling of power spinning of thin-walled shell with hoop inner rib. Trans Nonferrous Metals Soc China 18(1):6–13

    Article  Google Scholar 

  9. Huang L, Yang H, Zhan M (2008) 3D-FE modeling method of splitting spinning. Comput Mater Sci 42(4):643–652

    Article  Google Scholar 

  10. Huang L, Yang H, Zhan M, Hu LJ (2008) Numerical simulation of influence of material parameters on splitting spinning of aluminum alloy. Trans Nonferrous Metals Soc China 18(3):674–681

    Article  Google Scholar 

  11. Huang L, Yang H, Zhan M, Hu L (2009) Forming characteristics of splitting spinning based on the behaviors of roller. Comput Mater Sci 45(2):449–461

    Article  Google Scholar 

  12. Jiang S, Ren Z, Li C, Xue K (2009) Role of ball size in backward ball spinning of thin-walled tubular part with longitudinal inner ribs. J Mater Process Technol 209(4):2167–2174

    Article  Google Scholar 

  13. Jiang SY, Zheng YF, Ren ZY, Li CF (2009) Multi-pass spinning of thin-walled tubular part with longitudinal inner ribs. Trans Nonferrous Metals Soc China 19(1):215–221

    Article  Google Scholar 

  14. Shimizu I (2010) Asymmetric forming of aluminum sheets by synchronous spinning. J Mater Process Technol 210(4):585–592

    Article  Google Scholar 

  15. Music O, Allwood JM (2011) Flexible asymmetric spinning. CIRP Ann Manuf Technol 60:319–322

    Article  Google Scholar 

  16. Awiszus B, Härtel S (2011) Numerical simulation of non-circular spinning: a rotationally non-symmetric spinning process. Prod Eng 5(6):605–612

    Article  Google Scholar 

  17. Sekiguchi A, Arai H (2012) Control of wall thickness distribution by oblique shear spinning methods. J Mater Process Technol 212(4):786–793

    Article  Google Scholar 

  18. Zhang J, Zhan M, Yang H, Jiang Z, Han D (2012) 3D-FE modeling for power spinning of large ellipsoidal heads with variable thicknesses. Comput Mater Sci 53(1):303–313

    Article  Google Scholar 

  19. Xia QX, Lai ZY, Long H, Cheng XQ (2013) A study of the spinning force of hollow parts with triangular cross sections. Int J Adv Manuf Technol 68(9–12):2461–2470

    Article  Google Scholar 

  20. El-Khabeery MM, Fattouh M, El-Sheikh MN, HAMED OA (1991) On the conventional simple spinning of cylindrical aluminum cups. Int J Mach Tools Manuf 31(2):203–219

    Article  Google Scholar 

  21. Chen MD, Hsu RQ, Fuh KH (2001) Forecast of shear spinning force and surface roughness of spun cones by employing regression analysis. Int J Mach Tools Manuf 41(12):1721–1734

    Article  Google Scholar 

  22. Chen MD, Hsu RQ, Fuh KH (2005) Effects of over-roll thickness on cone surface roughness in shear spinning. J Mater Process Technol 159:1–8

    Article  Google Scholar 

  23. Kwiatkowski L, Tekkaya AE, Kleiner M (2013) Fundamentals for controlling thickness and surface quality during dieless necking-in of tubes by spinning. CIRP Ann Manuf Technol 62(1):299–302

    Article  Google Scholar 

  24. Jia Z, Han ZR, Xu Q, Peng WF (2014) Numerical simulation and experiment study on hollow spinning process for square cross-section cone. Int J Adv Manuf Technol 75(9–12):1605–1612

    Article  Google Scholar 

  25. Ma B, Tieu AK, Lu C, Jiang Z (2002) An experimental investigation of steel surface characteristic transfer by cold rolling. J Mater Process Technol 125–126(3):657–663

    Article  Google Scholar 

Download references

Author information

Authors and Affiliations

  1. Key Lab of Fundamental Science for National Defense of Aeronautical Digital Manufacturing Process, Shenyang Aerospace University, Shenyang, 110136, China

    Z. Jia, Z. R. Han, Q. Xu & Q. M. Kong

  2. Zhejiang Provincial Key Lab of Part Rolling Technology, Ningbo University, Ningbo, 315211, China

    W. F. Peng

Authors
  1. Z. Jia
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Z. R. Han
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Q. Xu
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. W. F. Peng
    View author publications

    You can also search for this author in PubMed Google Scholar

  5. Q. M. Kong
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Z. R. Han.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Jia, Z., Han, Z.R., Xu, Q. et al. Effects of processing parameters on the surface quality of square section die-less spinning. Int J Adv Manuf Technol 80, 1689–1700 (2015). https://doi.org/10.1007/s00170-015-7055-9

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s00170-015-7055-9

Keywords

Search

Navigation