1. Structural and electrical properties of novel Mg_0.9+0.5y Zn_0.4Al _y Zr_1.6−y (PO₄)₃ ceramic electrolytes synthesized via nitrate sol–gel method

   • N. K. Anuar
   • N. S. Mohamed

   Original Paper: Characterization methods of sol-gel and hybrid materials 18 June 2016 Pages: 249 - 258

   

2. Tailoring the microstructure of La_0.6Sr_0.4Co_0.2Fe_0.8O_3−α cathode material: the role of dispersing agent

   • Ismariza Ismail
   • Nafisah Osman
   • Abdul Mutalib Md Jani

   Original Paper: Characterization methods of sol-gel and hybrid materials 08 June 2016 Pages: 259 - 266

   

3. A new approach for preparation of free-standing nano-porous SiO₂ films with a large area

   • Youlai Xiang
   • Shuai Wu
   • Bin Zhou

   Original Paper: Functional coatings, thin films and membranes (including deposition techniques) 29 June 2016 Pages: 267 - 276

   

4. Composite films combining electrospun fiber network and epitaxial oxide by chemical solution deposition

   • Albert Calleja
   • Jordi Sort
   • Xavier Obradors

   Original Paper: Functional coatings, thin films and membranes (including deposition techniques) 02 July 2016 Pages: 277 - 284

   

5. The effect of polymer additives on the critical thicknesses of mullite thin films obtained from the monophasic sol–gel precursors

   • Zhaoxi Chen
   • Ruslan Burtovyy
   • Fei Peng

   Original Paper: Fundamentals of sol-gel and hybrid materials processing 15 June 2016 Pages: 285 - 296

   

6. Adsorbent layer for adsorption heat pump prepared with the surface-modified ferroaluminophosphate particles and inorganic silica binder

   • Seulki Cho
   • Dong An Cha
   • Taejin Hwang

   Original Paper: Industrial and technological applications of sol-gel and hybrid materials 06 July 2016 Pages: 297 - 305

   

7. Flexible acrylate-grafted silica aerogels for insulation purposes: comparison of reinforcement strategies

   • João P. Vareda
   • Telma Matias
   • Luisa Durães

   Original Paper: Nano- and macroporous materials (aerogels, xerogels, cryogels, etc.) 04 July 2016 Pages: 306 - 317

   

8. Facile fabrication of wear-resistant multifunctional surfaces on titanium alloy substrate by one-step anodization and modification with silicon dioxide nanoparticles

   • Qi Li
   • Fei Tang
   • Xiaohao Wang

   Original Paper: Nano-structured materials (particles, fibers, colloids, composites, etc.) 31 May 2016 Pages: 318 - 325

   

9. Tailoring the size and electrochemical performance of Mn₃O₄ nanoparticles by controlling the precipitation process

   • Wenle Ma
   • Yongmei Feng
   • Hongtao Cui

   Original Paper: Nano-structured materials (particles, fibers, colloids, composites, etc.) 09 June 2016 Pages: 326 - 332

   

10. Dielectric investigation of high density polyethylene loaded by ZnO nanoparticles synthesized by sol–gel route

    • Sh. A. Mansour
    • R. A. Elsad
    • M. A. Izzularab

    Original Paper: Nano-structured materials (particles, fibers, colloids, composites, etc.) 13 June 2016 Pages: 333 - 341

    

11. Investigations on absorption, photoluminescence and magnetic properties of ZnO: Co nanoparticles

    • Pawan Kumar
    • Praveen C. Pandey

    Original Paper: Nano-structured materials (particles, fibers, colloids, composites, etc.) 23 June 2016 Pages: 342 - 352

    

12. Sol–gel template preparation of alumina nanofillers for reinforcing the epoxy resin

    • Pavel V. Krivoshapkin
    • Ilya V. Mishakov
    • Petr A. Sitnikov

    Original Paper: Nano-structured materials (particles, fibers, colloids, composites, etc.) 29 June 2016 Pages: 353 - 361

    

13. Incorporation of epoxy resin and graphene nanolayers into silica xerogel network: an insight into thermal improvement of resin

    • Saeid Najafi-Shoa
    • Hossein Roghani-Mamaqani
    • Mehdi Salami-Kalajahi

    Original Paper: Nano-structured materials (particles, fibers, colloids, composites, etc.) 01 July 2016 Pages: 362 - 377

    

14. Experimental design applied to optimisation of silica nanoparticles size obtained by sonosynthesis

    • Rafael Jesús González-Álvarez
    • Ignacio Naranjo-Rodríguez
    • Dolores Bellido-Milla

    Original Paper: Nano-structured materials (particles, fibers, colloids, composites, etc.) 05 July 2016 Pages: 378 - 388

    

15. Growth of ZnO nanorod arrays by one-step sol–gel process

    • Ferhat Aslan
    • Ahmet Tumbul
    • İbrahim Halil Mutlu

    Original Paper: Nano-structured materials (particles, fibers, colloids, composites, etc.) 04 July 2016 Pages: 389 - 395

    

16. Green synthesis of hausmannite nanocrystals and their photocatalytic dye degradation and antimicrobial studies

    • K. Mohan Kumar
    • S. Godavarthi
    • L. Martinez Gomez

    Original Paper: Nano-structured materials (particles, fibers, colloids, composites, etc.) 05 July 2016 Pages: 396 - 401

    

17. Novel sol–gel-derived hardystonite-based biomagnetic nanoparticles for hyperthermia applications

    • Ali Farzin
    • Rahmatollah Emadi
    • Mohammadhossein Fathi

    Original Paper: Sol-gel and hybrid materials for biological and health (medical) applications 09 June 2016 Pages: 402 - 410

    

18. Sol–gel synthesis and in vitro bioactivity of glass–ceramics in SiO₂–CaO–Na₂O–P₂O₅ system

    • Ashley Thomas
    • Japes Bera

    Original Paper: Sol-Gel and Hybrid Materials for Biological and Health (Medical) Applications 20 June 2016 Pages: 411 - 416

    

19. Evaluation of mesoporous silicate nanoparticles for the sustained release of the anticancer drugs: 5-fluorouracil and 7-hydroxycoumarin

    • Hamdallah A. Hodali
    • Dua’a M. Marzouqa
    • Fatma Z. Tekfa

    Original Paper: Sol-gel and hybrid materials for biological and health (medical) applications 29 June 2016 Pages: 417 - 425

    

20. Photocatalytic reduction of 4-nitrophenol on in situ fluorinated sol–gel TiO₂ under UV irradiation using Na₂SO₃ as reducing agent

    • Claudia Castañeda
    • Francisco Tzompantzi
    • Ricardo Gómez

    Original Paper: Sol-gel and hybrid materials for catalytic, photoelectrochemical and sensor applications 08 June 2016 Pages: 426 - 435

    

21. Sol–gel preparation of NiO/ZrO_2(x)–MgO_(100−x) nanocatalyst used in CO₂/O₂ oxidative dehydrogenation of ethane to ethylene: influence of Mg/Zr ratio on catalytic performance

    • Parastoo Delir Kheyrollahi Nezhad
    • Mohammad Haghighi
    • Farhad Rahmani

    Original Paper: Sol-gel and hybrid materials for catalytic, photoelectrochemical and sensor applications 20 June 2016 Pages: 436 - 450

    

22. Synthesis of titanium-containing helical silicates for catalytic oxidation of alkenes

    • Xiaoyong Li
    • Benhua Huang
    • Yang Sun

    Original Paper: Sol-gel and hybrid materials for catalytic, photoelectrochemical and sensor applications 02 July 2016 Pages: 451 - 461

    

23. Directing photocatalytic and photoelectrocatalytic performance of TiO₂ by using TEA and NH₄F as doping precursors

    • Edgar Leonardo Castellanos-Leal
    • Próspero Acevedo-Peña
    • Elcy María Córdoba-Tuta

    Original Paper: Sol-gel and hybrid materials for catalytic, photoelectrochemical and sensor applications 04 July 2016 Pages: 462 - 473

    

24. Effect of A-site cationic radius on polycrystalline ceramics La _x Sm_0.67−x Sr_0.33MnO₃ prepared by sol–gel technique

    • Xiaohui Chen
    • Qingming Chen
    • Hui Zhang

    Original Paper: Sol-gel and hybrid materials for dielectric, electronic, magnetic and ferroelectric applications 02 June 2016 Pages: 474 - 479

    

25. Improved electrochromic performances of WO₃-based thin films via addition of CNTs

    • Shuping Liu
    • Wei Wang

    Original Paper: Sol-gel and hybrid materials for dielectric, electronic, magnetic and ferroelectric applications 08 June 2016 Pages: 480 - 486

    

26. Magnetic properties and photocatalytic activity of ZnFe_2−x La _x O₄ nanoparticles synthesized by sol–gel autocombustion method

    • S. M. Masoudpanah
    • M. Hasheminisari
    • A. Ghasemi

    Original Paper: Sol-gel and hybrid materials for dielectric, electronic, magnetic and ferroelectric applications 09 June 2016 Pages: 487 - 494

    

27. Effect of annealing temperature on negative magnetization behavior in Co_0.775Cu_0.225Cr₂O₄ ceramics

    • C. M. Zhu
    • L. G. Wang
    • S. L. Yuan

    Original Paper: Sol-gel and hybrid materials for dielectric, electronic, magnetic and ferroelectric applications 09 June 2016 Pages: 495 - 503

    

28. Sol–gel-derived thiocyanato-functionalized silica gel sorbents for adsorption of Fe(III) ions from aqueous solution: kinetics, isotherms and thermodynamics

    • Dian-Peng Sui
    • Hua-Xia Chen
    • Da-Wu Li

    Original Paper: Sol-gel and hybrid materials for energy, environment and building applications 03 June 2016 Pages: 504 - 513

    

29. Effect of sintering temperature on structural properties of LiMnPO₄ cathode materials obtained by sol–gel method

    • K. Rajammal
    • D. Sivakumar
    • S. Ramesh

    Original Paper: Sol-gel and hybrid materials for energy, environment and building applications 16 June 2016 Pages: 514 - 522

    

30. Surfactant-assisted synthesis of ZIF-8 nanocrystals for phthalic acid adsorption

    • Xinlong Yan
    • Yingli Yang
    • Sridhar Komarneni

    Original Paper: Sol-gel and hybrid materials for energy, environment and building applications 02 July 2016 Pages: 523 - 530

    

31. Sol–gel-derived planar waveguides of Er³⁺:Yb₃Al₅O₁₂ prepared by a polyvinylpyrrolidone-based method

    • T. Hlásek
    • V. Polák
    • J. Oswald

    Original Paper: Sol-gel and hybrid materials for optical, photonic and optoelectronic applications 04 June 2016 Pages: 531 - 537

    

32. Sol–gel preparation of moisture-resistant antireflective coatings from novel hollow silica nanoparticles

    • Chaoyou Tao
    • Hongwei Yan
    • Lin Zhang

    Original Paper: Sol-gel and hybrid materials for optical, photonic and optoelectronic applications 23 June 2016 Pages: 538 - 547

    

33. Compatibilization of natural rubber/nitrile rubber blends by sol–gel nano-silica generated by in situ method

    • Naresh D. Bansod
    • Bharat P. Kapgate
    • Subhas Chandra Debnath

    Original Paper: Sol-gel and hybrid materials with surface modification for applications 15 June 2016 Pages: 548 - 559

    

34. Synthesis of SrAl₂O₄:Sm nanopowder using reverse microemulsion and polyacrylamide gel methods: a comparison study of size, structural and photoluminescence properties

    • S. A. Hassanzadeh-Tabrizi
    • Mahsa Jafari
    • A. Faeghi-Nia

    Original Paper: Sol-gel, hybrids and solution chemistries 08 June 2016 Pages: 560 - 566

    

35. Comparative anti-corrosion properties of alkylthiols SAMs and mercapto functional silica sol–gel coatings on copper surface in sodium chloride solution

    • Wenjie Sui
    • Wenjie Zhao
    • Qunji Xue

    Original Paper: Sol-gel, hybrids and solution chemistries 13 June 2016 Pages: 567 - 578