1. What is the Process Window for Semi-solid Processing?

   • Duyao Zhang
   • Hongbiao Dong
   • Helen Atkinson

   Communication 05 November 2015 Pages: 1 - 5

   

2. Cobalt-Rich Phases in 11Cr-3W-3CoVNbTaNd Ferritic/Martensitic Steel

   • Yin Zhong Shen
   • Xiao Ling Zhou
   • Jia Rui Lu

   Communication 28 October 2015 Pages: 6 - 14

   

3. Fast Granularization of Lath-Like Bainite in FeNiC Alloys During Isothermal Holding at Ms+ 20 K (+20 °C)

   • Meriem Ben Haj Slama
   • Nathalie Gey
   • Sébastien Allain

   Communication 03 November 2015 Pages: 15 - 18

   

4. Modeling C-Curves for the Growth Rate of Widmanstätten and Bainitic Ferrite in Fe-C Alloys

   • Lindsay Leach
   • Mats Hillert
   • Annika Borgenstam

   Communication 23 November 2015 Pages: 19 - 25

   

5. Effect of Ti Addition on Carbide Modification and the Microscopic Simulation of Impact Toughness in High-Carbon Cr-V Tool Steels

   • Ki Sub Cho
   • Sang Il Kim
   • Hoon Kwon

   Communication 03 November 2015 Pages: 26 - 32

   

6. Beneficial Effect of Microalloyed Rare Earth on S Segregation in High-Purity Duplex Stainless Steel

   • Lei Chen
   • Xiaocong Ma
   • Tianqiao Mao

   Communication 19 November 2015 Pages: 33 - 38

   

7. Magnetic Properties of Al-Gd-TM Glass-Forming Alloys

   • Sergey Uporov
   • Svetlana Estemirova
   • Valentin Mitrofanov

   Communication 25 November 2015 Pages: 39 - 47

   

8. Foreword

   • Horst Biermann
   • Christos G. Aneziris

   Symposium: CRC799 Contribution 06 August 2015 Pages: 48 - 48

9. Deformation Mechanisms in Austenitic TRIP/TWIP Steel as a Function of Temperature

   • Stefan Martin
   • Steffen Wolf
   • David Rafaja

   Contribution 03 December 2014 Pages: 49 - 58

   

10. The Portevin–Le Châtelier Effect in a Metastable Austenitic Stainless Steel

    • Alexandra Müller
    • Christian Segel
    • Horst Biermann

    Symposium: CRC799 Contribution 28 May 2015 Pages: 59 - 74

    

11. Microstructure of CrMnNi Cast Steel After Explosive-Driven Flyer-Plate Impact at Room Temperature and Below

    • R. Eckner
    • B. Reichel
    • G. V. Garkushin

    Symposium: CRC799 Contribution 05 November 2015 Pages: 75 - 83

    

12. Influence of Temperature on Fatigue-Induced Martensitic Phase Transformation in a Metastable CrMnNi-Steel

    • Horst Biermann
    • Alexander Glage
    • Matthias Droste

    Symposium: CRC799 Contribution 04 January 2015 Pages: 84 - 94

    

13. Investigation of Phase Transformations in High-Alloy Austenitic TRIP Steel Under High Pressure (up to 18 GPa) by In Situ Synchrotron X-ray Diffraction and Scanning Electron Microscopy

    • Stephanie Ackermann
    • Stefan Martin
    • Anja Weidner

    Symposium: CRC799 Contribution 02 September 2015 Pages: 95 - 111

    

14. Contributions of ε and α′ TRIP Effects to the Strength and Ductility of AISI 304 (X5CrNi18-10) Austenitic Stainless Steel

    • Andreas Weiß
    • Heiner Gutte
    • Javad Mola

    Symposium: CRC799 Contribution 06 January 2015 Pages: 112 - 122

    

15. Functionally Graded High-Alloy CrMnNi TRIP Steel Produced by Local Heat Treatment Using High-Energy Electron Beam

    • D. Heinze
    • A. Buchwalder
    • H. Biermann

    Symposium: CRC799 Contribution 02 July 2015 Pages: 123 - 138

    

16. Effect of Vanadium Nitride Precipitation on Martensitic Transformation and Mechanical Properties of CrMnNi Cast Austenitic Steels

    • Marco Wendler
    • Benedikt Reichel
    • Javad Mola

    Symposium: CRC799 Contribution 20 December 2014 Pages: 139 - 151

    

17. Assessment of Experimental Data and Thermodynamic Modeling in the Zr-Fe-O System

    • Olga Fabrichnaya
    • Dmytro Pavlyuchkov

    Symposium: CRC799 Contribution 18 February 2015 Pages: 152 - 159

    

18. Metal-Matrix Composites Prepared by Paper-Manufacturing Technology

    • Claudia Wenzel
    • Christos G. Aneziris
    • Katja Pranke

    Symposium: CRC799 Contribution 04 March 2015 Pages: 160 - 169

    

19. Influence of Powder Particle Size on the Compaction Behavior and Mechanical Properties of a High-Alloy Austenitic CrMnNi TRIP Steel During Spark Plasma Sintering

    • S. Decker
    • S. Martin
    • L. Krüger

    Symposium: CRC799 Contribution 28 March 2015 Pages: 170 - 177

    

20. Gamma Prime Precipitation, Dislocation Densities, and TiN in Creep-Exposed Inconel 617 Alloy

    • Ram Krishna
    • Helen V. Atkinson
    • Simon P. Gill

    OriginalPaper 29 October 2015 Pages: 178 - 193

    

21. Phase Stability for the Pd-Si System: First-Principles, Experiments, and Solution-Based Modeling

    • S. H. Zhou
    • Y. Huo
    • Ralph E. Napolitano

    OriginalPaper 05 November 2015 Pages: 194 - 208

    

22. A Spinodal Decomposition Model for the Prediction of the Glass-Forming Ability of Ternary Mg Alloys

    • Eyal Eshed
    • Menachem Bamberger
    • Alexander Katsman

    OriginalPaper 28 October 2015 Pages: 209 - 221

    

23. Effect of Strain-Induced Martensite on Tensile Properties and Hydrogen Embrittlement of 304 Stainless Steel

    • Young Suk Kim
    • Sang Hwan Bak
    • Sung Soo Kim

    OriginalPaper 20 October 2015 Pages: 222 - 230

    

24. An Analytical Approach to Model Heterogonous Recrystallization Kinetics Taking into Account the Natural Spatial Inhomogeneity of Deformation

    • Haiwen Luo
    • Sybrand van der Zwaag

    OriginalPaper 05 November 2015 Pages: 231 - 238

    

25. Precipitation and Phase Transformations in 2101 Lean Duplex Stainless Steel During Isothermal Aging

    • Jean-Yves Maetz
    • Sophie Cazottes
    • Xavier Kleber

    OriginalPaper 06 November 2015 Pages: 239 - 253

    

26. Effect of Si and Mn Interactions on the Spheroidization and Coarsening Behavior of Cementite During Annealing in Severe Cold-Drawn Pearlitic Steel

    • Yiyou Tu
    • Linghui Huang
    • Jianqing Jiang

    OriginalPaper 03 November 2015 Pages: 254 - 259

    

27. Thermally Induced Structural Transformations of Fe₄₀Ni₄₀P₁₄B₆ Amorphous Alloy

    • Milica M. Vasić
    • Pavla Roupcová
    • Dragica M. Minić

    OriginalPaper 12 November 2015 Pages: 260 - 267

    

28. Effect of Starting Microstructure on the Grain Refinement in Cold-Rolled Low-Carbon Steel During Annealing at Two Different Heating Rates

    • Anish Karmakar
    • Madhumanti Mandal
    • Debalay Chakrabarti

    OriginalPaper 13 November 2015 Pages: 268 - 281

    

29. The Dislocation Mechanism of Stress Corrosion Embrittlement in Ti-6Al-2Sn-4Zr-6Mo

    • Tamara P. Chapman
    • Vassili A. Vorontsov
    • David Dye

    OriginalPaper 19 October 2015 Pages: 282 - 292

    

30. Effect of Al-Si Pack Cementation Diffusion Coating on High-Temperature Low-Cycle Fatigue Behavior of Inconel 713LC

    • Mohammadreza Mansuri
    • Seyed Mohammad Mehdi Hadavi
    • Esmail Zare

    OriginalPaper 29 October 2015 Pages: 293 - 300

    

31. Minimization and Mitigation of Wire EDM Cutting Errors in the Application of the Contour Method of Residual Stress Measurement

    • Bilal Ahmad
    • Michael E. Fitzpatrick

    OriginalPaper 09 November 2015 Pages: 301 - 313

    

32. Electrochemical Corrosion of Stainless Steel in Thiosulfate Solutions Relevant to Gold Leaching

    • Lokesh Choudhary
    • Wei Wang
    • Akram Alfantazi

    OriginalPaper 28 October 2015 Pages: 314 - 325

    

33. Physical, Thermal, Mechanical Properties, and Microstructural Characterization of Sn-9Zn-XGa Alloys

    • Tomasz Gancarz

    OriginalPaper Open access 16 November 2015 Pages: 326 - 333

    

34. Effect of Interfacial Reaction on the Mechanical Performance of Steel to Aluminum Dissimilar Ultrasonic Spot Welds

    • Lei Xu
    • Li Wang
    • Philip B. Prangnell

    OriginalPaper 19 October 2015 Pages: 334 - 346

    

35. Analysis and Characterization of the Role of Ni Interlayer in the Friction Welding of Titanium and 304 Austenitic Stainless Steel

    • C. H. Muralimohan
    • M. Ashfaq
    • K. Sivaprasad

    OriginalPaper 29 October 2015 Pages: 347 - 359

    

36. Thermal Stir Welds in Titanium

    • Richard W. Fonda
    • Keith E. Knipling
    • Adam L. Pilchak

    OriginalPaper 03 November 2015 Pages: 360 - 367

    

37. Effect of Cu Addition to Zn-12Al Alloy on Thermal Properties and Wettability on Cu and Al Substrates

    • Tomasz Gancarz
    • Janusz Pstruś
    • Sylwia Pawlak

    OriginalPaper Open access 05 November 2015 Pages: 368 - 377

    

38. Laser Cladding of γ-TiAl Intermetallic Alloy on Titanium Alloy Substrates

    • Iuliia Nikolaevna Maliutina
    • Hocine Si-Mohand
    • Philippe Bertrand

    OriginalPaper 23 October 2015 Pages: 378 - 387

    

39. Surface-Mechanical Properties of Electrodeposited Cu-Al₂O₃ Composite Coating and Effects of Processing Parameters

    • H. S. Maharana
    • Akarapu Ashok
    • A. Basu

    OriginalPaper 13 November 2015 Pages: 388 - 399

    

40. Zn Diffusion and α-Fe(Zn) Layer Growth During Annealing of Zn-Coated B Steel

    • Vit Janik
    • Yongjun Lan
    • Seetharaman Sridhar

    OriginalPaper 28 October 2015 Pages: 400 - 411

    

41. Influence of DIT Parameters on the Cementite Spheroidization in a Low-Alloy Medium Carbon Steel

    • Jon Arruabarrena
    • Beatriz López
    • Jose M. Rodriguez-Ibabe

    OriginalPaper 22 October 2015 Pages: 412 - 423

    

42. The Evolution of the Surface Morphologies and Microstructures of an Unleveled Hot-Rolled Steel Strip During Cold Rolling After Hydrogen Reduction

    • Yu-An Jing
    • Qiuyue Shang
    • Pinfeng Jia

    OriginalPaper 29 October 2015 Pages: 424 - 435

    

43. Effect of Intercritical Thermomechanical Processing on Austenite Retention and Mechanical Properties in a Multiphase TRIP-Assisted Steel

    • Alireza Mohamadizadeh
    • Abbas Zarei-Hanzaki
    • Mohammad Moallemi

    OriginalPaper 28 October 2015 Pages: 436 - 449

    

44. A High-Strength High-Ductility Ti- and Mo-Bearing Ferritic Steel

    • Yao Huang
    • Aimin Zhao
    • Fengli Yang

    OriginalPaper 16 November 2015 Pages: 450 - 460

    

45. Effects of MgO Nanoparticle Additions on the Structure and Mechanical Properties of Continuously Cast Steel Billets

    • Xiangzhou Gao
    • Shufeng Yang
    • Alex McLean

    OriginalPaper 12 November 2015 Pages: 461 - 470

    

46. An Analytical Framework for Predicting the Limit in Structural Refinement in Accumulative Roll Bonded Nickel

    • J. Q. Duan
    • Md. Zakaria Quadir
    • Michael Ferry

    OriginalPaper 16 November 2015 Pages: 471 - 478

    

47. Effect of Shear Deformation on Closure of a Central Void in Thin-Strip Rolling

    • Jong-Jin Park

    OriginalPaper 13 November 2015 Pages: 479 - 487

    

48. Effect of Grain Size on Springback and System Energy in Micro V-Bending with Phosphor Bronze Foil

    • Zhi Fang
    • Zhengyi Jiang
    • Di Wu

    OriginalPaper 16 November 2015 Pages: 488 - 493

    

49. Effect of Graphene Nanoplatelets on Wetting, Microstructure, and Tensile Characteristics of Sn-3.0Ag-0.5Cu (SAC) Alloy

    • Ashutosh Sharma
    • Heung-Rak Sohn
    • Jae Pil Jung

    OriginalPaper 28 October 2015 Pages: 494 - 503

    

50. Ductile Chromium in Heavily Cold-Drawn Cu₇₅Cr₂₅ Alloy

    • Yanli Chang
    • Zhiming Zhou
    • Yaping Wang

    OriginalPaper 16 November 2015 Pages: 504 - 509