Abstract
In semi-solid processing, the liquid fraction vs temperature is commonly used to define the process window. Conventionally, it is assumed that a freezing range is required for semi-solid processing but recently both high-purity aluminum and binary Al-Si eutectic alloy have been rheo-processed. Here, the kinetics during melting and solidification of pure metal are analyzed, and a comparison between the liquid fraction vs temperature and the liquid fraction vs time is presented. It is found that liquid fraction vs time is a significant criterion for semi-solid processing.
References
P. Gupta: ACM SIGDA Newsletter, 2010, vol. 40, pp.1-1.
D. Kirkwood: Int. Mater. Rev., 1994, vol. 39, pp. 173-189.
H.V. Atkinson: Prog. Mater. Sci., 2005, vol. 50, pp. 341-412.
O. Lashkari and R. Ghomashchi: Mater. Sci. Eng., A, 2008, vol. 486, pp. 333-340.
A.A. Kazakov: Adv. Mater. Process., 2000, vol. 157, pp. 31-34.
H.V. Atkinson, P. Kapranos, and D. Kirkwood: Proceedings of the 6th International Conference “Semi-solid Processing of Alloys and Composites”, Turin. 2000. pp. 445–46.
D. Liu, H.V. Atkinson, H. Jones: Acta Mater., 2005, vol. 53, pp. 3807-3819.
E.J. Zoqui, M.A. Naldi: J. Mater. Sci., 2011, vol. 46, pp. 7558-7566.
M.S. Salleh, M.Z. Omar, J. Syarif, M.N. Mohammed. Adv. Sci. Lett., 2013, vol. 19, pp. 3503-3507.
D.M. Benati, E.J. Zoqui, J. Mater. Eng. Perf., 2014, vol. 23, pp. 3156-3179.
U. Curle, H. Möller, J. Wilkins: Scripta Mater., 2011, vol. 64, pp. 479-482.
U. Curle, H. Möller, J. Wilkins: Mater. Lett., 2011, vol. 65, pp. 1469-1472.
H.B. Dong and J.D. Hunt: J. Therm. Anal. Calorim., 2001, vol. 64, pp. 341-350.
H.B. Dong, M. Shin, E. Kurum, H. Cama, J.D. Hunt: Fluid Phase Equilibr., 2003, vol. 212, pp. 199-208.
D. Larouche, C. Laroche, M. Bouchard: Acta Mater., 2003, vol. 51, pp. 2161-2170.
G. Höhne, W.F. Hemminger, and H. J. Flammersheim: Differential Scanning Calorimetry, 2nd edition, Springer, Berlin 2003.
G.H. Rodway and J.D. Hunt: J. Cryst. Growth, 1991, vol. 112, pp. 554-562.
G.H. Rodway and J.D. Hunt: J. Cryst. Growth, 1991, vol. 112, pp. 563-570.
H.B. Dong and R. Brooks: Mater. Sci. Eng., A, 2005, vol. 413-414, pp. 480-484.
H.V. Atkinson: Current Status of Semi-solid Processing of Metallic Materials, in: Advances in Material Forming, Springer, Paris, 2007, pp. 81-98.
The authors would like to acknowledge the University of Leicester for financial support.
Author information
Authors and Affiliations
Corresponding author
Additional information
Manuscript submitted July 24, 2015.
Rights and permissions
About this article
Cite this article
Zhang, D., Dong, H. & Atkinson, H. What is the Process Window for Semi-solid Processing?. Metall Mater Trans A 47, 1–5 (2016). https://doi.org/10.1007/s11661-015-3185-9
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11661-015-3185-9