1. Editorial

   • David Laughlin

   EditorialNotes 13 October 2016 Pages: 5661 - 5661

2. Decomposition Reaction of Metastable M₂C Carbide in a Multi-Component Semi-High-Speed Steel

   • Lei Chen
   • Jianming Pei
   • Xiaocong Ma

   Communication 20 October 2016 Pages: 5662 - 5669

   

3. Effect of Mo Addition on the Transformation Stasis Phenomenon During the Isothermal Formation of Bainitic Ferrite

   • Congyu Zhang
   • Hao Chen
   • Zhigang Yang

   Communication 11 October 2016 Pages: 5670 - 5674

   

4. Effects of Friction Stir Processing on the Phase Transformation and Microstructure of TiO₂-Compounded Ti-6Al-4V Alloy

   • Zihao Ding
   • Chengjian Zhang
   • Weijie Lu

   Communication 14 October 2016 Pages: 5675 - 5679

   

5. Identification and Characterization of Intercritical Heat-Affected Zone in As-Welded Grade 91 Weldment

   • Yiyu Wang
   • Rangasayee Kannan
   • Leijun Li

   Communication 22 September 2016 Pages: 5680 - 5684

   

6. Laser-Aided Direct Writing of Nickel-Based Single-Crystal Super Alloy (N5)

   • Yichen Wang
   • Jeongyoung Choi
   • Jyoti Mazumder

   Communication 21 September 2016 Pages: 5685 - 5690

   

7. A Method of Stray Grain Suppression for Single-Crystal Superalloy During Seed Melt-Back

   • Weidong Xuan
   • Jian Lan
   • Zhongming Ren

   Communication 20 October 2016 Pages: 5691 - 5697

   

8. Elucidating the Effect of Alloying Elements on the Behavior of Austenitic Stainless Steels at Elevated Temperatures

   • Meysam Naghizadeh
   • Hamed Mirzadeh

   Communication 16 September 2016 Pages: 5698 - 5703

   

9. Advanced Thermomechanical Processing for a High-Mn Austenitic Steel

   • Pavel Kusakin
   • Kaneaki Tsuzaki
   • Andrey Belyakov

   Communication 11 October 2016 Pages: 5704 - 5708

   

10. Enhanced Tensile Properties of Mg Sheets by a Unique Thermomechanical Processing Method

    • Mingzhe Bian
    • Zhuoran Zeng
    • Jian-feng Nie

    Communication 26 September 2016 Pages: 5709 - 5713

    

11. Foreword

    • R. I. Barabash

    Symposium: Neutron and X-Ray Studies of Advanced Materials VIII 04 October 2016 Pages: 5714 - 5714

12. HYBRID Simulations of Diffraction-Limited Focusing with Kirkpatrick-Baez Mirrors for a Next-Generation In Situ Hard X-ray Nanoprobe

    • Jörg Maser
    • Xianbo Shi
    • Stefan Vogt

    Symposium: Neutron and X-Ray Studies of Advanced Materials VIII 22 February 2016 Pages: 5715 - 5721

    

13. Dislocation Effects on the Diffraction Line Profiles from Nanocrystalline Domains

    • Alberto Leonardi
    • Paolo Scardi

    Symposium: Neutron and X-Ray Studies of Advanced Materials VIII 28 March 2015 Pages: 5722 - 5732

    

14. Determining Individual Phase Flow Properties in a Quench and Partitioning Steel with In Situ High-Energy X-Ray Diffraction and Multiphase Elasto-Plastic Self-Consistent Method

    • Xiaohua Hu
    • Kyoo Sil Choi
    • Yangdong Wang

    OriginalPaper 26 February 2016 Pages: 5733 - 5749

    

15. Phase Transformation and Residual Stress in a Laser Beam Spot-Welded TiAl-Based Alloy

    • Jie Liu
    • Peter Staron
    • Nikolai Kashaev

    Symposium: Neutron and X-Ray Studies of Advanced Materials VIII 24 October 2016 Pages: 5750 - 5760

    

16. Phase Transformations During Solidification of a Laser-Beam-Welded TiAl Alloy—An In Situ Synchrotron Study

    • Jie Liu
    • Peter Staron
    • Nikolai Kashaev

    Symposium: Neutron and X-Ray Studies of Advanced Materials VIII 23 September 2016 Pages: 5761 - 5770

    

17. Texture and Microstructure for Magnetic Properties of Two-Stage Cold-Rolled Fe-6.5 Wt Pct Si Thin Sheets

    • Yongchuang Yao
    • Yuhui Sha
    • Liang Zuo

    Symposium: Neutron and X-Ray Studies of Advanced Materials – VIII 18 July 2015 Pages: 5771 - 5776

    

18. Recrystallization Texture Transition in Fe-2.1 Wt Pct Si Steel by Different Cold Rolling Reduction

    • Ning Shan
    • Yuhui Sha
    • Liang Zuo

    Symposium: Neutron and X-Ray Studies of Advanced Materials – VIII 13 May 2015 Pages: 5777 - 5782

    

19. From Modeling of Plasticity in Single-Crystal Superalloys to High-Resolution X-rays Three-Crystal Diffractometer Peaks Simulation

    • Alain Jacques

    Symposium: Neutron and X-Ray Studies of Advanced Materials VIII 20 October 2016 Pages: 5783 - 5797

    

20. Foreword

    Symposium: Micromechanics of Advanced Materials III in Honor of J.C.M. Li 24 October 2016 Pages: 5798 - 5800

    

21. Dislocation Pile-Ups, Material Strength Levels, and Thermal Activation

    • Ronald W. Armstrong

    Symposium: Micromechanics of Advanced Materials III in Honor of J.C.M. Li 21 September 2015 Pages: 5801 - 5810

    

22. Dislocation Ledge Sources: Dispelling the Myth of Frank–Read Source Importance

    • L. E. Murr

    Symposium: Micromechanics of Advanced Materials III in Honor of J.C.M. Li 28 January 2016 Pages: 5811 - 5826

    

23. The Strength–Grain Size Relationship in Ultrafine-Grained Metals

    • N. Balasubramanian
    • Terence G. Langdon

    Symposium: Micromechanics of Advanced Materials III in Honor of J.C.M. Li 11 April 2016 Pages: 5827 - 5838

    

24. Linking Nanoscales and Dislocation Shielding to the Ductile–Brittle Transition of Silicon

    • ERIC Hintsala
    • CLAIRE Teresi
    • WILLIAM W. Gerberich

    Symposium: Micromechanics of Advanced Materials III in Honor of J.C.M. Li 30 June 2016 Pages: 5839 - 5844

    

25. Nanoscale Copper and Copper Compounds for Advanced Device Applications

    • Lih-Juann Chen

    Symposium: Micromechanics of Advanced Materials III in Honor of J.C.M. Li 21 April 2016 Pages: 5845 - 5851

    

26. Thermodynamic Predictions of Thermal Expansivity and Elastic Compliances at High Temperatures and Pressures Applied to Perovskite Crystals

    • S. J. Burns

    Symposium: Micromechanics of Advanced Materials III in Honor of J.C.M. Li 20 January 2016 Pages: 5852 - 5858

    

27. Crystallization in Fe- and Co-Based Amorphous Alloys Studied by In-Situ X-Ray Diffraction

    • L. J. ZHANG
    • P. F. YU
    • R. P. LIU

    Symposium: Micromechanics of Advanced Materials III in Honor of J.C.M. Li 13 October 2016 Pages: 5859 - 5862

    

28. Crystallographic Analysis of Nucleation at Hardness Indentations in High-Purity Aluminum

    • Chaoling Xu
    • Yubin Zhang
    • Dorte Juul Jensen

    Symposium: Micromechanics of Advanced Materials III in Honor of J.C.M. Li 09 August 2016 Pages: 5863 - 5870

    

29. Nanoindentation Creep Behavior of an Al_0.3CoCrFeNi High-Entropy Alloy

    • Lijun Zhang
    • Pengfei Yu
    • Riping Liu

    Symposium: Micromechanics of Advanced Materials III in Honor of J.C.M. Li 31 March 2016 Pages: 5871 - 5875

    

30. Hardness Evolution of Gamma-Irradiated Polyoxymethylene

    • Chuan-Hao Hung
    • Julie P. Harmon
    • Sanboh Lee

    Symposium: Micromechanics of Advanced Materials III in Honor of J.C.M. Li 25 April 2016 Pages: 5876 - 5881

    

31. A Nonlinear Viscous Model for Sn-Whisker Growth

    • Fuqian Yang

    Symposium: Micromechanics of Advanced Materials III in Honor of J.C.M. Li 29 April 2016 Pages: 5882 - 5889

    

32. Effect of Carbon Distribution During the Microstructure Evolution of Dual-Phase Steels Studied Using Cellular Automata, Genetic Algorithms, and Experimental Strategies

    • Chandan Halder
    • Anish Karmakar
    • Nirupam Chakraborti

    OriginalPaper 16 September 2016 Pages: 5890 - 5906

    

33. Ordering Transformation and Age Hardening in a Ni-Cr-W Superalloy

    • Xiangyu Gao
    • Rui Hu
    • Hengzhi Fu

    OriginalPaper 13 October 2016 Pages: 5907 - 5917

    

34. Effect of Coiling Temperature on Microstructure and Tensile Behavior of a Hot-Rolled Ferritic Lightweight Steel

    • Junfeng Wang
    • Qi Yang
    • Li Wang

    OriginalPaper 14 September 2016 Pages: 5918 - 5931

    

35. Formation and Growth Kinetics of Reverted Austenite During Tempering of a High Co-Ni Steel

    • Marina Gruber
    • Gerald Ressel
    • Reinhold Ebner

    OriginalPaper 21 September 2016 Pages: 5932 - 5941

    

36. Structural Characterization of Phase Separation in Fe-Cr: A Current Comparison of Experimental Methods

    • XIN XU
    • JOAKIM ODQVIST
    • PETER HEDSTRÖM

    OriginalPaper Open access 14 October 2016 Pages: 5942 - 5952

    

37. Modeling Hardenable Stainless Steels Using Calculated Martensite Start Temperatures in Thermodynamic Equilibrium Calculations

    • Merlin Seifert
    • Werner Theisen

    OriginalPaper 13 October 2016 Pages: 5953 - 5959

    

38. Relations of Counterface Hardness with Wear Behavior and Tribo-Oxide Layer of AISI H13 Steel

    • Q. Y. Zhang
    • S. Q. Wang
    • X. H. Cui

    OriginalPaper 08 September 2016 Pages: 5960 - 5973

    

39. A Study on the Hot Deformation Behavior of 47Zr-45Ti-5Al-3V Alloy with Initial Lamellar α Structure

    • Yuanbiao Tan
    • Liyuan Ji
    • Riping Liu

    OriginalPaper 12 September 2016 Pages: 5974 - 5984

    

40. Enhancement of Impact Toughness by Delamination Fracture in a Low-Alloy High-Strength Steel with Al Alloying

    • Junjie Sun
    • Tao Jiang
    • Yongning Liu

    OriginalPaper 15 September 2016 Pages: 5985 - 5993

    

41. The Dependence of Portevin–Le Châtelier Effect on the γ′ Precipitates in a Wrought Ni-Base Superalloy

    • Xinguang Wang
    • Guoming Han
    • Zhuangqi Hu

    OriginalPaper 15 August 2016 Pages: 5994 - 6003

    

42. Deformation Behavior in Medium Mn Steel of Nanometer-Sized α′ + γ Lamellar Structure

    • Yoon-Uk Heo
    • Dong Hwi Kim
    • Sung-Joon Kim

    OriginalPaper 27 September 2016 Pages: 6004 - 6016

    

43. Effect of Surface Modification on Cumulative Tensile Ductility of AZ31 Magnesium Sheet

    • Mahdi Habibnejad-korayem
    • Mukesh K. Jain
    • Raja K. Mishra

    OriginalPaper 12 September 2016 Pages: 6017 - 6031

    

44. Impact Toughness Properties of Nickel- and Manganese-Free High Nitrogen Austenitic Stainless Steels

    • Roghayeh Mohammadzadeh
    • Alireza Akbari
    • Mina Mohammadzadeh

    OriginalPaper 11 October 2016 Pages: 6032 - 6041

    

45. Effect of Annealing Temperature and Time on Microstructure and Mechanical Properties of Multilayered Steel Composite Sheets

    • R. Cao
    • X. Yu
    • T. Koseki

    OriginalPaper 11 October 2016 Pages: 6042 - 6055

    

46. Microstructure, Texture, and Superplasticity of a Fine-Grained Mg-Gd-Zr Alloy Processed by Equal-Channel Angular Pressing

    • R. Alizadeh
    • R. Mahmudi
    • T. G. Langdon

    OriginalPaper 19 September 2016 Pages: 6056 - 6069

    

47. The Effect of Carbon Additions on the Creep Resistance of Fe-25Al-5Zr Alloy

    • Ferdinand Dobeš
    • Věra Vodičková
    • Petr Kratochvíl

    OriginalPaper 21 September 2016 Pages: 6070 - 6076

    

48. Influences of Hydrogen Micropores and Intermetallic Particles on Fracture Behaviors of Al-Zn-Mg-Cu Aluminum Alloys

    • Hang Su
    • Takuro Yoshimura
    • Yoshio Watanabe

    OriginalPaper 23 September 2016 Pages: 6077 - 6089

    

49. Precipitate Evolution and Creep Behavior of a W-Free Co-based Superalloy

    • Qinyuan Liu
    • James Coakley
    • David C. Dunand

    OriginalPaper 20 September 2016 Pages: 6090 - 6096

    

50. Mechanical Properties of the TiAl IRIS Alloy

    • Thomas Voisin
    • Jean-Philippe Monchoux
    • Alain Couret

    OriginalPaper 20 October 2016 Pages: 6097 - 6108