1. Observation on Formation of Fresh Martensite from the Reversed Austenite During Water-Quenching Process in Fe-0.2C-5Mn Steel

   • Chuan Zhao
   • Chi Zhang
   • Yu-Qing Weng

   Communication 17 July 2015 Pages: 3789 - 3792

   

2. Wetting and Interfacial Characteristics of Mg AZ61 Alloy/Galvanized Steel in Cold Metal Transfer Process

   • Qiaoli Lin
   • Fan Yang
   • Tingbiao Guo

   Communication 24 June 2015 Pages: 3793 - 3796

   

3. Enhancing Hydrogen Embrittlement Resistance of Lath Martensite by Introducing Nano-Films of Interlath Austenite

   • Meimei Wang
   • C. Cem Tasan
   • Dierk Raabe

   Communication 23 June 2015 Pages: 3797 - 3802

   

4. Ductile-Phase Toughening in TiB_w/Ti-Ti₃Al Metallic-Intermetallic Laminate Composites

   • Hao Wu
   • Bo Cheng Jin
   • Steven Nutt

   Communication 24 June 2015 Pages: 3803 - 3807

   

5. The Al-Al₃Ni Eutectic Reaction: Crystallography and Mechanism of Formation

   • Yangyang Fan
   • Makhlouf M. Makhlouf

   Communication 08 July 2015 Pages: 3808 - 3812

   

6. Discussion of “On the Boltzmann–Matano Analysis of Diffusion in a Semi-infinite Medium”

   • Masayuki Okugawa
   • Hiroshi Numakura

   Discussion 03 July 2015 Pages: 3813 - 3814

7. Foreword

   • John S. Carpenter
   • Allison M. Beese
   • James Sears

   Symposium: Additive Manufacturing: Interrelationships of Fabrication, Constitutive Relationships Targeting Performance, and Feedback to Process Control 26 June 2015 Pages: 3815 - 3815

8. Fatigue Strength Prediction for Titanium Alloy TiAl6V4 Manufactured by Selective Laser Melting

   • Stefan Leuders
   • Malte Vollmer
   • Thomas Niendorf

   Symposium: Additive Manufacturing: Interrelationships of Fabrication, Constitutive Relationships Targeting Performance, and Feedback to Process Control 02 April 2015 Pages: 3816 - 3823

   

9. Microstructure and Mechanical Properties of Long Ti-6Al-4V Rods Additively Manufactured by Selective Electron Beam Melting Out of a Deep Powder Bed and the Effect of Subsequent Hot Isostatic Pressing

   • S. L. Lu
   • H. P. Tang
   • M. Qian

   Symposium: Additive Manufacturing: Interrelationships of Fabrication, Constitutive Relationships Targeting Performance, and Feedback to Process Control 30 May 2015 Pages: 3824 - 3834

   

10. Local and Global Mechanical Behavior and Microstructure of Ti6Al4V Parts Built Using Electron Beam Melting Technology

    • Leila Ladani

    Symposium: Additive Manufacturing: Interrelationships of Fabrication, Constitutive Relationships Targeting Performance, and Feedback to Process Control 20 May 2015 Pages: 3835 - 3841

    

11. A Study on the Laser Spatter and the Oxidation Reactions During Selective Laser Melting of 316L Stainless Steel, Al-Si10-Mg, and Ti-6Al-4V

    • Marco Simonelli
    • Chris Tuck
    • Richard Hague

    Symposium: Additive Manufacturing: Interrelationships of Fabrication, Constitutive Relationships Targeting Performance, and Feedback to Process Control 04 April 2015 Pages: 3842 - 3851

    

12. An Efficient Multi-Scale Simulation Architecture for the Prediction of Performance Metrics of Parts Fabricated Using Additive Manufacturing

    • Deepankar Pal
    • Nachiket Patil
    • Brent Stucker

    Symposium: Additive Manufacturing: Interrelationships of Fabrication, Constitutive Relationships Targeting Performance, and Feedback to Process Control 08 May 2015 Pages: 3852 - 3863

    

13. Additive Manufacturing of IN100 Superalloy Through Scanning Laser Epitaxy for Turbine Engine Hot-Section Component Repair: Process Development, Modeling, Microstructural Characterization, and Process Control

    • Ranadip Acharya
    • Suman Das

    Symposium: Additive Manufacturing: Interrelationships of Fabrication, Constitutive Relationships Targeting Performance, and Feedback to Process Control 28 April 2015 Pages: 3864 - 3875

    

14. A Laser Deposition Strategy for the Efficient Identification of Glass-Forming Alloys

    • Peter Tsai
    • Katharine M. Flores

    Symposium: Additive Manufacturing: Interrelationships of Fabrication, Constitutive Relationships Targeting Performance, and Feedback to Process Control 23 April 2015 Pages: 3876 - 3882

    

15. Effect of Print Density on the Properties of High Speed Sintered Elastomers

    • Adam Ellis
    • Liam Hartley
    • Neil Hopkinson

    Symposium: Additive Manufacturing: Interrelationships of Fabrication, Constitutive Relationships Targeting Performance, and Feedback to Process Control 18 March 2015 Pages: 3883 - 3886

    

16. Role of the Molar Volume on Estimated Diffusion Coefficients

    • Sangeeta Santra
    • Aloke Paul

    OriginalPaper 13 June 2015 Pages: 3887 - 3899

    

17. Thermal Stability of Intermetallic Phases in Fe-rich Fe-Cr-Ni-Mo Alloys

    • Ying Yang
    • Lizhen Tan
    • Jeremy T. Busby

    OriginalPaper 12 June 2015 Pages: 3900 - 3908

    

18. Coarsening and Hardening Behaviors of Cu-Rich Precipitates in Super304H Austenitic Steel

    • Ping Ou
    • Hui Xing
    • Changshun Yang

    OriginalPaper 12 June 2015 Pages: 3909 - 3916

    

19. A Quantitative Investigation of Cementite Dissolution Kinetics for Continuous Heating of Hypereutectoid Steel

    • Seok-Jae Lee
    • Kester D. Clarke

    OriginalPaper 12 June 2015 Pages: 3917 - 3923

    

20. Microstructures and Stability Origins of β-(Ti,Zr)-(Mo,Sn)-Nb Alloys with Low Young’s Modulus

    • Qing Wang
    • Qun Li
    • Peter K. Liaw

    OriginalPaper 16 June 2015 Pages: 3924 - 3931

    

21. Melting Behavior of Al/Pb/Sn/Al Multilayered Thin Films

    • Patan Yousaf Khan
    • M. Manolata Devi
    • Krishanu Biswas

    OriginalPaper 24 June 2015 Pages: 3932 - 3942

    

22. Characterization of Plastic Flow Pertinent to the Evolution of Bulk Residual Stress in Powder-Metallurgy, Nickel-Base Superalloys

    • S. L. Semiatin
    • P. N. Fagin
    • R. E. Dutton

    OriginalPaper 08 July 2015 Pages: 3943 - 3959

    

23. Electrical Characteristics of an Ag/n-InP Schottky Diode Based on Temperature-Dependent Current–Voltage and Capacitance–Voltage Measurements

    • Murat Gülnahar

    OriginalPaper 18 July 2015 Pages: 3960 - 3971

    

24. Evolution of Minor Phases in a 9PctCr Steel: Effect of Tempering Temperature and Relation with Hydrogen Trapping

    • Carolina Hurtado-Noreña
    • Claudio Ariel Danón
    • Pablo Bruzzoni

    OriginalPaper 08 July 2015 Pages: 3972 - 3988

    

25. Effects of Finish Cooling Temperature on Tensile Properties After Thermal Aging of Strain-Based API X60 Linepipe Steels

    • Hyo Kyung Sung
    • Dong Ho Lee
    • Byoungchul Hwang

    OriginalPaper 02 June 2015 Pages: 3989 - 3998

    

26. Thermo-mechanical Fatigue Failure of Thermal Barrier Coated Superalloy Specimen

    • Rajivgandhi Subramanian
    • Yuzuru Mori
    • Masakazu Okazaki

    OriginalPaper 23 June 2015 Pages: 3999 - 4012

    

27. On the Achievement of Nanostructured Interstitial Free Steel by Four-Layer Accumulative Roll Bonding Process at Room Temperature

    • Roohollah Jamaati
    • Mohammad Reza Toroghinejad
    • Hossein Edris

    OriginalPaper 23 June 2015 Pages: 4013 - 4019

    

28. Intergranular M₂₃C₆ Carbide Precipitation Behavior and Its Effect on Mechanical Properties of Inconel 690 Tubes

    • Tae-Hyuk Lee
    • Young-Jun Lee
    • Jong-Hyeon Lee

    OriginalPaper 13 June 2015 Pages: 4020 - 4026

    

29. A Simplified Approach for Developing Constitutive Equations for Modeling and Prediction of Hot Deformation Flow Stress

    • Hamed Mirzadeh

    OriginalPaper 13 June 2015 Pages: 4027 - 4037

    

30. Microstructure, Mechanical Properties, and Toughening Mechanisms of a New Hot Stamping-Bake Toughening Steel

    • Tao Lin
    • Hong-Wu Song
    • Yun Chen

    OriginalPaper 08 July 2015 Pages: 4038 - 4046

    

31. The Mechanism of High Ductility for Novel High-Carbon Quenching–Partitioning–Tempering Martensitic Steel

    • Shengwei Qin
    • Yu Liu
    • Yonghua Rong

    OriginalPaper 26 June 2015 Pages: 4047 - 4055

    

32. Effect of Hydrostatic Pressure on the 3D Porosity Distribution and Mechanical Behavior of a High Pressure Die Cast Mg AZ91 Alloy

    • Federico Sket
    • Ana Fernández
    • María Teresa Pérez-Prado

    OriginalPaper 01 July 2015 Pages: 4056 - 4069

    

33. Multidimensional Study on Spall Behavior of High-Purity Copper Under Sliding Detonation

    • Yang Yang
    • Zhiqiang Peng
    • Qingming Zhang

    OriginalPaper 26 June 2015 Pages: 4070 - 4077

    

34. Effect of Temperature on the Nano/Microstructure and Mechanical Behavior of Nanotwinned Ag Films

    • Huan Zhang
    • Jie Geng
    • Matthew J. Kramer

    OriginalPaper 24 June 2015 Pages: 4078 - 4085

    

35. High-Cycle Fatigue Resistance of Si-Mo Ductile Cast Iron as Affected by Temperature and Strain Rate

    • Paolo Matteis
    • Giorgio Scavino
    • Donato Firrao

    OriginalPaper 26 June 2015 Pages: 4086 - 4094

    

36. The Influence of Welding Parameters on the Nugget Formation of Resistance Spot Welding of Inconel 625 Sheets

    • Hamid Reza Rezaei Ashtiani
    • Roozbeh Zarandooz

    OriginalPaper 01 July 2015 Pages: 4095 - 4105

    

37. Modeling of Intermetallic Compounds Growth Between Dissimilar Metals

    • Li Wang
    • Yin Wang
    • Joseph Robson

    OriginalPaper Open access 08 July 2015 Pages: 4106 - 4114

    

38. The Nature and Origin of “Double Expanded Austenite” in Ni-Based Ni-Ti Alloys Developing Upon Low Temperature Gaseous Nitriding

    • Matej Fonović
    • Andreas Leineweber
    • Eric J. Mittemeijer

    OriginalPaper 23 June 2015 Pages: 4115 - 4131

    

39. The Effects of Processing Time on the Microstructure and Composition of Plasma Pack-Aluminized and -Oxidized Surface Layers on Low Carbon Steel

    • Ahmad Reza Rastkar
    • Narges Rezvani

    OriginalPaper 08 July 2015 Pages: 4132 - 4142

    

40. Magnetic Properties of Evaporated Ni Thin Films: Effect of Substrates, Thickness, and Cu Underlayer

    • M. Hemmous
    • A. Layadi
    • P. Pernod

    OriginalPaper 16 June 2015 Pages: 4143 - 4149

    

41. Impact of Copper-Doped Titanium Dioxide Interfacial Layers on the Interface-State and Electrical Properties of Si-based MOS Devices

    • Seçkİn Akin
    • Savaş Sönmezoğlu

    OriginalPaper 08 July 2015 Pages: 4150 - 4159

    

42. In Situ Study of Microstructure Evolution in Solidification of Hypereutectic Al-Si Alloys with Application of Thermal Analysis and Neutron Diffraction

    • Dimitry G. Sediako
    • Wojciech Kasprzak

    OriginalPaper 02 July 2015 Pages: 4160 - 4173

    

43. Effect of Direct Current on Microstructure Evolution of Directionally Solidified Sn-70 wt pct Bi Alloy at Different Pulling Rates

    • Limin Zhang
    • Ning Li
    • Hui Xing

    OriginalPaper 08 July 2015 Pages: 4174 - 4182

    

44. Measurement of Mechanical Coherency Temperature and Solid Volume Fraction in Al-Zn Alloys Using In Situ X-ray Diffraction During Casting

    • Jean-Marie Drezet
    • Bastien Mireux
    • Michael Drakopoulos

    OriginalPaper 09 July 2015 Pages: 4183 - 4190

    

45. An Innovative Two-Stage Reheating Process for Wrought Aluminum Alloy During Thixoforming

    • JiaoJiao Wang
    • D. Brabazon
    • GuiMin Lu

    OriginalPaper 02 June 2015 Pages: 4191 - 4201

    

46. Transformation of Lamellar Structures in Equal Channel Angular Pressing: Geometric Model and Application to Nickel Aluminum Bronze

    • Cameron J. Barr
    • Daniel T. McDonald
    • Kenong Xia

    OriginalPaper 07 June 2015 Pages: 4202 - 4214

    

47. Analytic Solutions to Determine Critical Magnetic Fields for Thermoelectric Magnetohydrodynamics in Alloy Solidification

    • Andrew Kao

    Kao 01 July 2015 Pages: 4215 - 4233

    

48. Mechanical and Wear Properties of Sb- and Y-Added Mg-9Al-1Zn (AZ91) Alloy

    • Arun Boby
    • A. Srinivasan
    • B. C. Pai

    OriginalPaper 26 June 2015 Pages: 4234 - 4246

    

49. Ellipsometric Investigation of Optical Parameters and Characterization of Spray Pyrolysis-Derived ZnO Films

    • Olcay Gençyılmaz
    • Ferhunde Atay
    • İdris Akyüz

    OriginalPaper 24 June 2015 Pages: 4247 - 4254

    

50. Electrochemical and Mechanical Behavior of Lead-Silver and Lead-Bismuth Casting Alloys for Lead-Acid Battery Components

    • Wislei R. Osório
    • Leandro C. Peixoto
    • Amauri Garcia

    OriginalPaper 24 June 2015 Pages: 4255 - 4267