Abstract
Low carbon steel was plasma pack aluminized at 973 K (700 °C) for 5, 10, and 15 minutes in vacuum of 15 mbar. A paste of aluminum was packed around the samples, and the process was carried out in glow discharge of argon gas in one step without further diffusion processes. The aluminized samples were oxidized at 973 K (700 °C) and 15 mbar for 60 minutes in synthetic air. The aluminized and oxidized layers were characterized for iron-aluminum intermetallic phases, local composition, morphology, and hardness of the phases. At 973 K (700 °C) after 5-, 10-, and 15-minute treatments, FeAl3 and Fe2Al5 intermetallic compounds were observed in the surface layers. After 60-minute oxidation, Fe3Al and FeAl compounds appeared at the interface between the compound layers and the oxide scale. Oxidation products were mainly Al2O3 and a few amounts of Fe3O4 and Fe2O3. The thicknesses of the compound layers on the samples were up to 350 μm. The maximum hardness of the aluminized layers was 980 HV0.5.
Similar content being viewed by others
References
M.B. Isiko: PhD Thesis, Norwegian University of Science and Technology, 2012.
K.H. Kim, V.D. Benny, V.T. Gustaaf and J.K. Yoon: Mater. Sci. Forum, 2006, vol. 519-521, pp. 1871-1875.
I.I. Danzo: PhD Thesis, Gent University, 2012.
M. Zhe, O.B. DezellusGardiola, M. Braccini and J.C. Viala: J. Phase. Equilib. Diff., 2011, vol. 32 (6), pp. 486-497.
A.R. Rastkar: Appl. Surf. Sci., 2013, vol. 276, pp. 112–119.
M. Nastasi, J.W. Mayer and J.K. Hirvonen: Ion-Solid Interactions: Fundamentals and Applications, pp. 295–330 Cambridge University Press, Cambridge, 1996.
F.C. Yin, M.X. Zhao, Y.X. Liu, W. Han and Z. Li: Trans. Nonferrous Met. Soc. China, 2013, vol. 23, pp. 556–561.
M. Badaruddin: Makara Teknologi, 2011, vol. 15(2), pp. 137-141.
Y. Tanaka and M. Kajihara: Mater. Trans., 2009, vol. 50(9), pp. 2212 – 2220.
X. Si, B. Lu and Z. Wang: J. Mater. Sci. Technol., 2009, vol. 25(4), pp. 433-436.
Z.C. Zhou, F.S. Han, and Z.Y. Gao: Acta Materialia,2004, vol. 52, pp. 4049–4054.
X.L. Zhu, Z.J. Yao, X.D. Gu, W. Cong and P.Z. Zhang: Trans. Nonferrous Met. Soc. China, 2009, vol. 19, pp. 143-148.
M. Boufenghour, A. Hayoune, N.Y.A. Rokhmanov, M. Boucher and D. Hamana: Functional Materials, 2004, vol. 11 (2), pp. 397-401.
Y Xia, SX Yu, M Yao, TF Li (2001). Trans. Nonferrous Met. Soc. China, 11(6): 817-821.
Acknowledgments
The authors are grateful to Shahid Beheshti University of Iran for the financial support to this study.
Author information
Authors and Affiliations
Corresponding author
Additional information
Manuscript submitted August 12, 2014.
Rights and permissions
About this article
Cite this article
Rastkar, A.R., Rezvani, N. The Effects of Processing Time on the Microstructure and Composition of Plasma Pack-Aluminized and -Oxidized Surface Layers on Low Carbon Steel. Metall Mater Trans A 46, 4132–4142 (2015). https://doi.org/10.1007/s11661-015-3034-x
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11661-015-3034-x