1. Effect of aging on shape memory behavior of Ti-51.3 At. pct ni thin films

   • A. Ishida
   • M. Sato
   • S. Miyazaki

   OriginalPaper Pages: 3753 - 3759

2. The deposition of aluminide and silicide coatings on γ-TiAl using the halide-activated pack cementation method

   • T. C. Munro
   • B. Gleeson

   OriginalPaper Pages: 3761 - 3772

3. Influence of titanium and carbon contents on the hydrogen trapping of microalloyed steels

   • R. Valentini
   • A. Solina
   • P. De Gregorio

   OriginalPaper Pages: 3773 - 3780

4. Fracture and fatigue-crack growth behavior in ductile-phase toughened molybdenum disilicide: Effects of niobium wirevs particulate reinforcements

   • K. Badrinarayanan
   • A. L. McKelvey
   • K. T. Venkateswara Rao

   OriginalPaper Pages: 3781 - 3792

5. Plastic zone and pileup around large indentations

   • D. F. Bahr
   • W. W. Gerberich

   OriginalPaper Pages: 3793 - 3800

6. The balance of mechanical and environmental properties of a multielement niobium-niobium silicide-basedIn Situ composite

   • B. P. Bewlay
   • M. R. Jackson
   • H. A. Lipsitt

   OriginalPaper Pages: 3801 - 3808

7. Effects of the alumina scale on the room-temperature tensile behavior of preoxidized MA 956

   • J. Chao
   • J. L. González-Carrasco
   • G. González-Doncel

   OriginalPaper Pages: 3809 - 3816

8. Shear ligament phenomena in Fe₃Al intermetallics and micromechanics of shear ligament toughening

   • H. Chiu
   • X. Mao

   OriginalPaper Pages: 3817 - 3825

9. Microstructural evolution and superplastic deformation behavior of fine grain 5083Al

   • P. A. Friedman
   • A. K. Ghosh

   OriginalPaper Pages: 3827 - 3839

10. Conditioning monitoring by microstructural evaluation of cumulative fatigue damage

    • C. Fukuoka
    • Y. G. Nakagawa
    • R. N. Pangborn

    OriginalPaper Pages: 3841 - 3851

11. Evidence of fracture surface interference for cracks loaded in shear detected by phase-shifted speckle interferometry

    • R. U. Goulet
    • T. S. Gross
    • D. A. Mendelsohn

    OriginalPaper Pages: 3853 - 3860

12. Creep lifetime prediction of oxide-dispersion-strengthened nickel-base superalloys: A micromechanically based approach

    • M. Heilmaier
    • B. Reppich

    OriginalPaper Pages: 3861 - 3870

13. An evaluation of the creep properties of two Al-Si alloys produced by rapid solidification processing

    • Luboš Kloc
    • Stefano Spigarelli
    • Terence G. Langdon

    OriginalPaper Pages: 3871 - 3879

14. Correlation of microstructure and fracture toughness in high-chromium white iron hardfacing alloys

    • Sunghak Lee
    • Seong-Hun Choo
    • Sangho Ahn

    OriginalPaper Pages: 3881 - 3891

15. Microstructure and fracture of SiC-particulate-reinforced cast A356 aluminum alloy composites

    • Sunghak Lee
    • Dongwoo Suh
    • Dongil Kwon

    OriginalPaper Pages: 3893 - 3901

16. Notch fracture inγ-titanium aluminides

    • Madan G. Mendiratta
    • Robert L. Goetz
    • Dennis M. Dimiduk

    OriginalPaper Pages: 3903 - 3912

17. Elevated temperature deformation behavior of a dispersion-strengthened Al-Fe,V,Si alloy

    • Shantanu Mitra

    OriginalPaper Pages: 3913 - 3923

18. Fracture characteristics, microstructure, and tissue reaction of Ti-5Al-2.5Fe for orthopedic surgery

    • Mitsuo Niinomi
    • Toshiro Kobayashi
    • Yukihiro Matsuyama

    OriginalPaper Pages: 3925 - 3935

19. Flow and fracture of bimaterial systems based on aluminum alloys

    • Todd M. Osman
    • John J. Lewandowski

    OriginalPaper Pages: 3937 - 3947

20. Hydrogen-induced cleavage fracture of Fe₃Al-based intermetallics

    • X. Mao
    • L. Qiao

    OriginalPaper Pages: 3949 - 3956

21. An analysis of the flow stress of a two-phase alloy system, Ti-6Al-4V

    • R. E. Reed-Hill
    • C. V. Iswaran
    • M. J. Kaufman

    OriginalPaper Pages: 3957 - 3962

22. Elastic moduli of titanium-hydrogen alloys in the temperature range 20 °C to 1100 °C

    • O. N. Senkov
    • M. Dubois
    • J. J. Jonas

    OriginalPaper Pages: 3963 - 3970

23. Measurement of friction under sheet forming conditions

    • W. Wang
    • R. H. Wagoner
    • X. -J. Wang

    OriginalPaper Pages: 3971 - 3981

24. The quench sensitivity of cast Al-7 wt pct Si-0.4 wt pct Mg alloy

    • D. L. Zhang
    • L. Zheng

    OriginalPaper Pages: 3983 - 3991

25. High-temperature oxidation of Ti₃Al-based titanium aluminides in oxygen

    • T. K. Roy
    • R. Balasubramaniam
    • A. Ghosh

    OriginalPaper Pages: 3993 - 4002

26. Effect of nitrogen on the oxidation behavior of Ti₃Al-based intermetallic alloys

    • T. K. Roy
    • R. Balasubramaniam
    • A. Ghosh

    OriginalPaper Pages: 4003 - 4010

27. Infrared transient-liquid-phase joining of SCS-6/β21S titanium matrix composite

    • Craig A. Blue
    • Vinod K. Sikka
    • Ray Y. Lin

    OriginalPaper Pages: 4011 - 4018

28. Microstructural features of friction welded MA 956 superalloy material

    • C. Y. Kang
    • T. H. North
    • D. D. Perovic

    OriginalPaper Pages: 4019 - 4029

29. Nonuniform distribution of carbonitride particles and its effect on prior austenite grain size in the simulated coarse-grained heat-affected zone of thermomechanical control-processed steels

    • D. W. Tian
    • L. P. Karjalainen
    • Xiaofeng Chen

    OriginalPaper Pages: 4031 - 4038

30. Investigation of the temperature field developed by a spinning beam in laser processing

    • C. Hu
    • T. N. Baker

    OriginalPaper Pages: 4039 - 4047

31. Microstructure of Cu-Co alloys solidified at various supercoolings

    • A. Munitz
    • R. Abbaschian

    OriginalPaper Pages: 4049 - 4059

32. Macrotransport-solidification kinetics modeling of equiaxed dendritic growth: Part I. Model development and discussion

    • L. Nastac
    • D. M. Stefanescu

    OriginalPaper Pages: 4061 - 4074

33. Macrotransport-solidification kinetics modeling of equiaxed dendritic growth: Part II. Computation problems and validation on INCONEL 718 superalloy castings

    • L. Nastac
    • D. M. Stefanescu

    OriginalPaper Pages: 4075 - 4083

34. Modeling of primary and secondary dendrites in a Cu-6 Wt Pct Sn alloy

    • N. Tiedje
    • P. N. Hansen
    • A. S. Pedersen

    OriginalPaper Pages: 4085 - 4093

35. Mathematical modeling of the extrusion of 6061/Al₂O₃/20p composite

    • W. C. Chen
    • C. H. J. Davies
    • E. B. Hawbolt

    OriginalPaper Pages: 4095 - 4111

36. Modeling particle fracture during the extrusion of aluminum/alumina composites

    • C. H. J. Davies
    • W. -C. Chen
    • J. K. Brimacombe

    OriginalPaper Pages: 4113 - 4120

37. The squeeze casting of hypoeutectic binary Al-Cu

    • M. Gallerneault
    • G. Durrant
    • B. Cantor

    OriginalPaper Pages: 4121 - 4132

38. Modeling recrystallization kinetics, grain sizes, and textures during multipass hot rolling

    • Hans Erik Vatne
    • Roar Ørsund
    • Erik Nes

    OriginalPaper Pages: 4133 - 4144

39. Analysis of thermal residual stress in a thick-walled ring of duralcan-base Al-SiC functionally graded material

    • Yasuyoshi Fukui
    • Yoshimi Watanabe

    OriginalPaper Pages: 4145 - 4151

40. Martensitic transformations in NiMnAl β phase alloys

    • R. Kainuma
    • K. Ishida
    • H. Nakano

    OriginalPaper Pages: 4153 - 4162

41. Infiltration of fibrous preform by molten aluminum in a centrifugal force field

    • Yoshinori Nishida
    • Itaru Shirayanagi
    • Yoshibumi Sakai

    OriginalPaper Pages: 4163 - 4169

42. Influence of reinforcement volume fraction and size on the microstructure and abrasion wear resistance of hot Isostatic pressed white iron matrix composites

    • E. Pagounis
    • V. K. Lindroos
    • M. Talvitie

    OriginalPaper Pages: 4171 - 4181

43. Influence of matrix structure on the abrasion wear resistance and toughness of a hot isostatic pressed white iron matrix composite

    • E. Pagounis
    • V. K. Lindroos
    • M. Talvitie

    OriginalPaper Pages: 4183 - 4191

44. Creep deformation and damage in a continuous fiber-reinforced Ti-6Al-4V composite

    • S. W. Schwenker
    • D. Eylon

    OriginalPaper Pages: 4193 - 4204

45. Lamellar growth of eutectic equiaxed grains

    • Adrian V. Catalina
    • Doru M. Stefanescu

    Communications Pages: 4205 - 4210

46. Synthesis of full-density nanocrystalline tungsten carbide by reduction of tungstic oxide at room temperature

    • M. Sherif El-Eskandarany
    • T. J. Konno
    • K. Takada

    Communications Pages: 4210 - 4213

47. Synthesis of Nanocrystalline Ni₃Cu by Sol-Gel route

    • S. K. Pradhan
    • A. Datta
    • D. Charkavorty

    Communications Pages: 4213 - 4216