1. Online damage severity level classification in gears under natural damage progression

   • Pradeep Kundu
   • Ashish K. Darpe
   • Mingjian Zuo

   ORIGINAL ARTICLE 21 November 2022 Pages: 1 - 20

   

2. Surface roughness prediction for turning based on the corrected subsection theoretical model

   • Juan Lu
   • Xin Wang
   • Kai Chen

   ORIGINAL ARTICLE 21 November 2022 Pages: 21 - 35

   

3. Application of cutting power consumption in tool condition monitoring and wear prediction based on Gaussian process regression under variable cutting parameters

   • Biyao Qiang
   • Kaining Shi
   • Junxue Ren

   ORIGINAL ARTICLE 21 November 2022 Pages: 37 - 50

   

4. A method of geometric error identification and compensation of CNC machine tools based on volumetric diagonal error measurements

   • Zixin Lin
   • Wenjie Tian
   • Lina Wang

   ORIGINAL ARTICLE 21 November 2022 Pages: 51 - 68

   

5. Research on laser-assisted micro-milling of fused silica

   • Yuan Jin
   • Bo Wang
   • Fei Ding

   ORIGINAL ARTICLE 21 November 2022 Pages: 69 - 77

   

6. Effect of relative feeding direction on surface texture in abrasive cloth flap wheel polishing process

   • Yun Zhang
   • Xiaojun Lin
   • Junfeng Zhang

   ORIGINAL ARTICLE 22 November 2022 Pages: 79 - 96

   

7. Finite element modeling on micro-machining of graphene-reinforced aluminum matrix composites

   • Hao Yu
   • Zhenpeng He
   • Fangchao Yan

   ORIGINAL ARTICLE 22 November 2022 Pages: 97 - 110

   

8. Modeling for prediction of sawing force based on the maximum undeformed chip distribution in the granite sawing

   • Jinyou Kang
   • Jinsheng Zhang
   • Heng Zhang

   ORIGINAL ARTICLE 22 November 2022 Pages: 111 - 126

   

9. Tool orientation optimization method based on the best curvature matching

   • Jieshi Dong
   • Zhiyong Chang
   • Neng Wan

   ORIGINAL ARTICLE 22 November 2022 Pages: 127 - 142

   

10. Comprehensive experimental study of shot peening on the surface integrity evolution of 12Cr2Ni4A high-strength steel

    • Jiuyue Zhao
    • Jinyuan Tang
    • Huaming Liu

    ORIGINAL ARTICLE 22 November 2022 Pages: 143 - 164

    

11. A systematic study on three-roll continuous straightening process for LSAW pipes

    • Chunge Wang
    • Keke Zhang
    • Xueying Huang

    ORIGINAL ARTICLE 22 November 2022 Pages: 165 - 182

    

12. Low-temperature plasma hardening impact on the properties of the surface layer of the cutting tool working part

    • Boris Brzhozovskii
    • Elena Zinina
    • Vladimir Tabakov

    ORIGINAL ARTICLE 22 November 2022 Pages: 183 - 195

    

13. Influence mechanism of staggered distance on grain morphology evolution and texture state of AZ31 curved profile formed by staggered extrusion (SE)

    • Zi Yu Chen
    • Feng Li
    • Hua Qiu Du

    ORIGINAL ARTICLE 22 November 2022 Pages: 197 - 207

    

14. An adaptive genetic algorithm optimize neural networks approach for wafer dicing saw quality prediction

    • Jun Shi
    • Sihan Du
    • Lintao Zhou

    ORIGINAL ARTICLE 22 November 2022 Pages: 209 - 218

    

15. Numerical simulation of the residual stress in the Mg-5Zn-3.5Sn-1Mn-0.5Ca-0.5Cu alloy with different extrusion parameters

    • Cong Wang
    • Meng Yan
    • Yuansheng Yang

    ORIGINAL ARTICLE 22 November 2022 Pages: 219 - 228

    

16. A V-shaped weld seam measuring system for large workpieces based on image recognition

    • Fang Guo
    • Weibin Zheng
    • Mingpu Yao

    ORIGINAL ARTICLE 22 November 2022 Pages: 229 - 243

    

17. Process fundamentals and quality investigation in extrusion 3D printing of shear thinning materials: extrusion process based on Nishihara model

    • Yonghao Luo
    • Weiwen Sun
    • Xinyue Zhang

    ORIGINAL ARTICLE 22 November 2022 Pages: 245 - 264

    

18. A setting-round process of pipe end by three-roller for large pipes

    • Qingdang Meng
    • Shiqi Zhang
    • Jun Zhao

    ORIGINAL ARTICLE 22 November 2022 Pages: 265 - 280

    

19. Influence of laser process on the porosity-related defects, microstructure and mechanical properties for selective laser melted AlSi10Mg alloy

    • Zhenxuan Luo
    • Weiqin Tang
    • Xuming Su

    ORIGINAL ARTICLE 23 November 2022 Pages: 281 - 296

    

20. Optimized injection-molding process for thin-walled polypropylene part using genetic programming and interior point solver

    • Mehdi Moayyedian
    • Mohammad Reza Chalak Qazani
    • Vahid Pourmostaghimi

    ORIGINAL ARTICLE 23 November 2022 Pages: 297 - 313

    

21. On machine learning and visual analysis for quality prediction of film metallization process

    • Thiago M. R. Bastos
    • Luiz Stragevitch
    • Cleber Zanchettin

    ORIGINAL ARTICLE 23 November 2022 Pages: 315 - 327

    

22. Online analysis method to correlate the mode shape for forced vibration in milling thin-walled workpieces

    • Qiushuang Guo
    • Xinyong Mao
    • Jianwen Liao

    ORIGINAL ARTICLE 23 November 2022 Pages: 329 - 347

    

23. Simulation and experimental analysis on the deformation rate on slender rod parts during the recoating process in high viscosity ceramic stereolithography

    • Kexin Zhang
    • Bingshan Liu
    • Gong Wang

    ORIGINAL ARTICLE 23 November 2022 Pages: 349 - 361

    

24. Analytical and experimental study on the surface generation mechanism in two-dimensional ultrasonic-assisted grinding of silicon carbide

    • Hongbo Li
    • Tao Chen
    • Haotian Li

    ORIGINAL ARTICLE 23 November 2022 Pages: 363 - 382

    

25. Recycled powder age estimation based on morphology evolution for the LPBF-M process

    • Leopoldo Ruiz-Huerta
    • Verena M. Moock
    • Alberto Caballero-Ruiz

    ORIGINAL ARTICLE 23 November 2022 Pages: 383 - 396

    

26. CuCr/Cu contact material fabricated via high-speed laser cladding

    • Hongbin Xie
    • Weimian Guan
    • Hongtao Wang

    ORIGINAL ARTICLE 23 November 2022 Pages: 397 - 410

    

27. Influence mechanism of active elements on multi-field coupling in laser cladding Fe60 process

    • Tenghui Jia
    • Chang Li
    • Xing Han

    ORIGINAL ARTICLE 23 November 2022 Pages: 411 - 428

    

28. Study on the mechanism of quasi-continuous wave (QCW) fiber laser low-damage processing of carbon fiber-reinforced plastics

    • Liao Zhou
    • Jia Zhou
    • Yuhong Long

    ORIGINAL ARTICLE 23 November 2022 Pages: 429 - 447

    

29. Topology modification method of generating gear grinding based on multi-axis linkage parameter optimization

    • Jiang Han
    • Hong Jiang
    • Lian Xia

    ORIGINAL ARTICLE 23 November 2022 Pages: 449 - 466

    

30. One-shot additive manufacturing of robotic finger with embedded sensing and actuation

    • Gianni Stano
    • S M Al Islam Ovy
    • Yonas Tadesse

    ORIGINAL ARTICLE Open access 23 November 2022 Pages: 467 - 485

    

31. Analytical approach of merging a different number of storage aisle under a fully sequenced order

    • Michael Eder

    ORIGINAL ARTICLE Open access 24 November 2022 Pages: 487 - 496

    

32. Research on the deformation mechanism of egg-shaped shells in granular medium bulging

    • Jiadong Huang
    • Zhiying Sun
    • Quanda Zhang

    ORIGINAL ARTICLE 24 November 2022 Pages: 497 - 509

    

33. Research on tooth surface design and side milling machining method of ruled line face gear

    • Xiaomeng Chu
    • Hong Zeng
    • Yizhan Huang

    ORIGINAL ARTICLE 24 November 2022 Pages: 511 - 526

    

34. Experimental study on longitudinal-torsional ultrasonic vibration drilling of carbon fiber–reinforced plastics/titanium alloy stacks

    • Zhiyuan Zhou
    • Yong Feng
    • Xiaolin Jia

    ORIGINAL ARTICLE 24 November 2022 Pages: 527 - 543

    

35. Numerical simulation and multiobjective optimization of fluid–structure interaction in aluminum extrusion

    • Danilo Pazeto
    • João Luiz Junho Pereira
    • Guilherme Ferreira Gomes

    ORIGINAL ARTICLE 24 November 2022 Pages: 545 - 566

    

36. Optimal design of the dynamic performance of the ultra-precision fly cutting machine tool

    • Yuanyuan Ding
    • Xiaoting Rui
    • Junjie Gu

    ORIGINAL ARTICLE 25 November 2022 Pages: 567 - 585

    

37. New method of metrological evaluation of industrial rolling bearing vibration measurement systems

    • Mateusz Wrzochal

    ORIGINAL ARTICLE Open access 25 November 2022 Pages: 587 - 600

    

38. A method for analyzing the texture features of free-form surface polishing paths based on co-occurrence matrix

    • Jia Xuan Li
    • Bo Zhou
    • Ming Cai

    Application 21 November 2022 Pages: 601 - 618

    

39. Application of hybrid laser powder bed fusion additive manufacturing to microwave radio frequency quarter wave cavity resonators

    • Alex Riensche
    • Paul Carriere
    • Prahalada Rao

    Application 23 November 2022 Pages: 619 - 632

    

40. In-process detection of miniature size holes in cold-rolled steel strips

    • Dibyayan Patra
    • Suresh Chavhan
    • Chitresh Kundu

    Application 24 November 2022 Pages: 633 - 645