Articles

1. The Growth of {1 1 h}〈1 2 1/h〉 (α*-Fiber) Grains and the Evanesce of {001}〈100〉 (Cube) Grains During the Recrystallization of Warm Rolled Fe-6.5 Wt Pct Si Non-oriented Electrical Steel

   • Haijie Xu
   • Youliang He
   • Steve Yue

   Original Research Article 25 March 2024 Pages: 1942 - 1957

   

2. Microstructure and High-Temperature Tribological Properties of Laser-Cladded WC10Co4Cr–xTi₂AlC Coatings

   • Xi Hui
   • Kong Dejun

   Original Research Article 24 March 2024 Pages: 1976 - 1987

   

3. The Microstructure Refinement and Mechanical Properties Improving of Friction Stir Processed Fe–Mn–Cr–N Steel

   • Fengming Qin
   • Tong Yang
   • Xiaodong Zhao

   Original Research Article 23 March 2024 Pages: 2034 - 2053

   

4. Evolution of the Stored Energy Density in a X2CrNiMo17-12-2 Austenitic Steel Under Cyclic Loading Conditions

   • Charles Mareau
   • Quentin Hatte

   Original Research Article 21 March 2024 Pages: 1932 - 1941

   

5. Nitrogen-Substituting Carbon Significantly Improves Softening Resistance of H13 Hot-Work Die Steel

   • Hai-Jian Wang
   • Hao Feng
   • Zhou-Hua Jiang

   Original Research Article 21 March 2024 Pages: 1916 - 1931

   

6. Modeling of Cu Precipitation in Fe–Cu and Fe–Cu–Mn Alloys Under Neutron and Electron Irradiation

   • Senlin Cui

   Original Research Article 21 March 2024 Pages: 1849 - 1866

   

7. Weld Cracking Susceptibility of High-Cr Ni-Base Fe Alloys and Its Improvement—Development of Novel Test Method for Ductility-Dip Cracking and New Alloy

   • Toshio Yonezawa
   • Hannu Hänninen
   • Atsushi Hashimoto

   Original Research Article 20 March 2024 Pages: 1878 - 1893

   

8. Correction: Tailoring Columnar Austenite Grains in the Weld Metal of EH36 Shipbuilding Steel via CaF₂-TiO₂ Fluxes

   • Yongwu Wu
   • Xiaobo Yuan
   • Cong Wang

   Correction 19 March 2024 Pages: 2153 - 2153

9. Surface Damage and Microstructure Evolution of Copper-Containing Antibacterial Stainless Steel During Quasi-In Situ Tensile Process

   • Juan Li
   • Shuqian Guo
   • Yugui Li

   Original Research Article 19 March 2024 Pages: 1894 - 1907

   

10. Hardness Prediction of the Heat-Affected Zone in Multilayer Welded SUS316 Stainless Steel Based on Dislocation Density Change Behavior

    • Lina Yu
    • Kazutoshi Nishimoto
    • Kazuyoshi Saida

    Original Research Article Open access 19 March 2024 Pages: 1788 - 1803

    

11. Non-destructive Compositional and Structural Analysis of Early Chinese Currencies

    • Michael T. Wall
    • Yuheng Wang
    • Marcus L. Young

    Original Research Article 18 March 2024 Pages: 1836 - 1848

    

12. Magnetic-Controlled Short Process Preparation Technique for Phosphor Bronze Based on Structure Refinement

    • Zhe Shen
    • Boyi Luo
    • Yunbo Zhong

    Original Research Article 18 March 2024 Pages: 1804 - 1813

    

13. Microstructural Evolution in Inconel 718 During Room-Temperature Tube Flow Forming: Plastic Flow Heterogeneities and δ Phase Evolution

    • Charbel Moussa
    • Emile Hazemann
    • Christian Dumont

    Brief Communication 18 March 2024 Pages: 1311 - 1318

    

14. Effects of Heat Treatment on the Mechanical and Corrosion Resistance Properties of 316L NRHH Porous Bone Scaffolds by Selective Laser Melting

    • Xinzhi Hu
    • Shubo Xu
    • Guocheng Ren

    Original Research Article 17 March 2024 Pages: 1626 - 1642

    

15. Diffusion Growth and Mechanical Properties of Intermetallic Compounds in Mg–Pr System

    • Zhiying Li
    • Yongkang Tan
    • Yong Du

    Original Research Article 17 March 2024 Pages: 1576 - 1587

    

16. Towards an Improved Understanding of the Evolution of the Size Distribution of Ultrafine Nanoparticles Produced by a Rapidly Quenched Vapor Source

    • Guannan Yang
    • Junyu He
    • Chengqiang Cui

    Original Research Article 15 March 2024 Pages: 1509 - 1515

    

17. Lattice Parameter of Ferrite in Silicon Cast Irons

    • Marcos G. Lopez
    • Moukrane Dehmas
    • Jacques Lacaze

    Original Research Article 15 March 2024 Pages: 1908 - 1915

    

18. Gradient Residual Strain Measurement Procedure in Surface Impacted Railway Steel Axles by Using Neutron Scattering

    • Liang Zhou
    • Han Zhang
    • Shengchuan Wu

    Topical Collection: 2023 Metallurgical Processes Workshop for Young Scholars 14 March 2024

    

19. Bainite Formation in a Carbon-Free Fe–Cr–N System

    • Philip König
    • Jonathan Lentz
    • Sebastian Weber

    Original Research Article Open access 13 March 2024 Pages: 1690 - 1699

    

20. Understanding the Reversed Tension–Compression Asymmetry of an Extruded Mg-10Y Sheet from the Perspective of Slip Activity and Plastic Heterogeneity

    • Y. B. Zhang
    • R. Ni
    • D. D. Yin

    Original Research Article 12 March 2024 Pages: 1673 - 1689

    

21. Modeling the Evolution of the Dislocation Density and Yield Stress of Al over a Wide Range of Temperatures and Strain Rates

    • Abbas Sadeghi
    • Ernst Kozeschnik

    Original Research Article Open access 10 March 2024 Pages: 1643 - 1653

    

22. Quasi In-Situ Study of Microstructure in a Laser Powder Bed Fusion Martensitic Stainless Steel

    • Ayda Shahriari
    • Mehdi Sanjari
    • Mohsen Mohammadi

    Brief Communication 09 March 2024 Pages: 1302 - 1310

    

23. The Beneficial Effect of Iron in Aluminum-Cerium-Based Cast Alloys

    • Michael P. Moodispaw
    • Emre Cinkilic
    • Alan A. Luo

    Original Research Article Open access 08 March 2024 Pages: 1351 - 1362

    

24. Comparative Plasma Nitrocarburizing of AISI 316L and AISI 304 Steels Using a Solid Carbon Active Screen: Differences in the Developing Microstructures

    • S. M. Jafarpour
    • S. Martin
    • A. Leineweber

    Original Research Article Open access 07 March 2024 Pages: 1588 - 1599

    

25. Macro-scale Compositional Inhomogeneity in Friction Stir Processed Mg–Al–Zn Cast Alloy and Its Effect on Mechanical Property

    • Qingsong Zhang
    • Xuesong Fu
    • Aidang Shan

    Original Research Article 07 March 2024 Pages: 1550 - 1563

    

26. Advanced Polycrystalline γ′-Strengthened CoNiCr-Based Superalloys

    • S. Neumeier
    • L. P. Freund
    • M. Göken

    Original Research Article Open access 07 March 2024 Pages: 1319 - 1337

    

27. Design Solutes to Achieve Columnar-to-Equiaxed Transition and Grain Refinement in Cast Multi-principal-element Alloys

    • N. Gao
    • X. W. Liu
    • Y. Yang

    Original Research Article 06 March 2024 Pages: 1397 - 1408

    

28. Correction to: Microstructural and Phase Evolution Behavior of Compound Layers of Controlled Gaseous Nitrided AISI 1015 Steel

    • Won-Beom Lee
    • Taehwan Kim
    • Young-Min Kim

    Correction 05 March 2024 Pages: 1700 - 1700

29. Optimization of Nano and Micro Filler Concentration in Epoxy Matrix for Better Mechanical and Anticorrosion Properties

    • Yosra M. Atteya
    • Dipika R. Barbadikar
    • Mohamed F. Aly

    Original Research Article 05 March 2024 Pages: 1448 - 1468

    

30. Formation, Dispersion and Distribution of TiB₂ Particles in In-Situ Al-TiB₂ Functionally Graded Nanocomposites

    • Nidhi Sindhu
    • R. K. Goyal
    • V. M. Sreekumar

    Original Research Article 04 March 2024 Pages: 1654 - 1672

    

31. Unveiling the Room-Temperature Softening Phenomenon and Texture Evolution in Room-Temperature-Rolled Cu–0.13Sn Alloys

    • Aman Gupta
    • Lalit Kaushik
    • Shi-Hoon Choi

    Original Research Article 04 March 2024 Pages: 1516 - 1538

    

32. Enhanced Microstructural Stability and Hardness of Multi-component Nanocrystalline Nickel Alloys Processed via Mechanical Alloying

    • Mari-Therese S. Burton
    • B. Chad Hornbuckle
    • Martin P. Harmer

    Original Research Article 04 March 2024 Pages: 1338 - 1350

    

33. Effect of Coupling Low-Flow Pouring with Inoculation on the As-Cast Microstructure of 7055 Alloys

    • Dong Li
    • Yanfeng Han
    • Qing Dong

    Original Research Article 02 March 2024 Pages: 1564 - 1575

    

34. Mechanical and Wear Behavior of Cobalt Based Composite with In-Situ Carbide Formed via Decomposition of Ti₃SiC₂

    • Kaili Song
    • Shasha Yang
    • Fuhui Wang

    Original Research Article 02 March 2024 Pages: 1495 - 1508

    

35. A Feasible Thermomechanical Process of a Duplex-Phase Fe–Mn–Al–C Steel for Significantly Increasing Ductility Without Loss of Strength

    • Y. Wang
    • P. Chen
    • X. W. Li

    Original Research Article 01 March 2024 Pages: 1539 - 1549

    

36. Penetration-Dependent Microstructures in TiO₂-Induced Weld Metal of EH36 Shipbuilding Steel

    • Yongwu Wu
    • Xiaobo Yuan
    • Cong Wang

    Brief Communication 01 March 2024 Pages: 1295 - 1301

    

37. Effects of Lath Boundary Segregation and Reversed Austenite on Toughness of a High-Strength Low-Carbon Steel

    • Xinghao Wei
    • Tenglong Gong
    • Zhongwu Zhang

    Original Research Article 29 February 2024 Pages: 1484 - 1494

    

38. Optimizing the Phase Distribution in Arc-Based Direct Energy Deposition of Duplex Stainless Steel

    • H. Z. Attar
    • J. W. Fellowes
    • D. L. Engelberg

    Original Research Article 28 February 2024 Pages: 1600 - 1625

    

39. Characterization and Rationalization of Microstructural Evolution in GRCop-84 Processed by Laser-Powder Bed Fusion (L-PBF)

    • Robert P. Minneci
    • Michael P. Haines
    • Claudia J. Rawn

    Original Research Article 28 February 2024 Pages: 1377 - 1396

    

40. Exploring the Role of Thermodynamic Parameters in Determining Zr–Cu–Al–Ag Glass-Forming Composition

    • Juhi Verma
    • Sai Pranav
    • Jatin Bhatt

    Original Research Article 28 February 2024 Pages: 1363 - 1376

    

41. Nanoindentation Hardness and Modulus of Al₂O₃–SiO₂–CaO and MnO–SiO₂–FeO Inclusions in Iron

    • Alejandra Slagter
    • Jonathan Aristya Setyadji
    • Andreas Mortensen

    Original Research Article Open access 27 February 2024 Pages: 1469 - 1483

    

42. Effect of Thickness-Dependent Sandwich Microstructure on the Thermal Conductivity of HPDC Mg–4Sm–2Al Alloy

    • Zixin Li
    • Fanjin Yao
    • Dejiang Li

    Original Research Article 27 February 2024 Pages: 1418 - 1434

    

43. An Axisymmetric Analytical Model for Cracking During Solidification and Its Comparison with the RDG Model

    • Jiangwei Liu
    • Pengfei Hu
    • Sindo Kou

    Original Research Article 26 February 2024 Pages: 1435 - 1447

    

44. Efficient Modeling of Composition-Dependent Lattice Constants of Multicomponent Metallic Solid Solutions Based on High-Throughput Experiment

    • Yuanxun Zhou
    • Jiantao Fan
    • Hong Wang

    Original Research Article 25 February 2024 Pages: 1243 - 1257

    

45. New Insight into Toughness Enhancement in a Lath Martensitic Steel

    • Ahmad Mirzaei
    • Christopher D. Barrett
    • Hossein Beladi

    Original Research Article Open access 25 February 2024 Pages: 1409 - 1417

    

46. Thermal Stability of Hardness and Modulus in Martensitic Ti–6Al–4V-Based Alloys: Role of V, Fe, and Ge Solute Contents

    • K. N. Chaithanya Kumar
    • Shashi Mohan Rao Varukuti
    • K. S. Suresh

    Original Research Article 24 February 2024 Pages: 1258 - 1270

    

47. A Micro-arc Oxidation/Poly(1,3-Trimethylene Carbonate) Hybrid Coating for Anticorrosion and Hemocompatibility Enhancement of High-Purity Magnesium

    • Mingcheng Feng
    • Qingyun Fu
    • Zhentao Yu

    Original Research Article 24 February 2024 Pages: 1217 - 1228

    

48. In Situ TiC Particles-Reinforced Body-Centered-Cubic Ni_0.6CoFe_1.4 Medium-Entropy Alloys for High Hardness and Good Wear Resistance

    • Jian Wu
    • Xiaoyan Liu
    • Heguo Zhu

    Brief Communication 24 February 2024 Pages: 992 - 997

    

49. Estimation of Spatio-temporal Temperature Evolution During Laser Spot Melting Using In Situ Dynamic X-Ray Radiography

    • Rakesh R. Kamath
    • Hahn Choo
    • Sudarsanam Suresh Babu

    Brief Communication 24 February 2024 Pages: 983 - 991

    

50. Effect of Strain Rate on the Mechanical Behavior of Al-Mg Alloy Under a Pulsed Electric Current

    • Daniel Dobras
    • Zbigniew Zimniak
    • Mateusz Dziubek

    Original Research Article 23 February 2024 Pages: 1284 - 1294