Collection
Special Issue: Thermal Spray Applications for Extreme Environments
- Submission status
- Closed
Special Issue published in October 2019, Vol. 28, No. 7 of Journal of Thermal Spray Technology
Editors
-
Andrew Ang
Swinburne University of Technology, Australia
-
Heidi deVilliers-Lovelock
Oerlikon Metco WOKA GmbH, Germany
-
Steven Matthews
University of Auckland, New Zealand
-
Buta Singh Sidhu
MRS Punjab Technical University, India
-
Harpreet Singh
Indian Institute of Technology Ropar, India
Articles (29 in this collection)
-
-
Thermal Spray for Extreme Environments
- Content type: Editorial
- Published: 23 October 2019
- Pages: 1339 - 1345
-
Microstructure of Ni-Cr-Based Coating for Corrosive Conditions
Authors (first, second and last of 6)
- Harminder Singh
- S. B. S. Kalsi
- N. P. S. Saini
- Content type: Peer Reviewed
- Published: 23 October 2019
- Pages: 1420 - 1432
-
PS-PVD Processing of Single-Phase Lanthanum Tungstate Layers for Hydrogen-Related Applications
Authors (first, second and last of 8)
- D. Marcano
- M. E. Ivanova
- R. Vaßen
- Content type: Peer Reviewed
- Published: 23 October 2019
- Pages: 1554 - 1564
-
Suspension Plasma-Sprayed Thermal Barrier Coatings for Light-Duty Diesel Engines
Authors (first, second and last of 5)
- Wellington Uczak de Goes
- Joop Somhorst
- Kseniya Illkova
- Content type: Peer Reviewed
- Open Access
- Published: 02 October 2019
- Pages: 1674 - 1687
-
The Role of Laser Texturing in Improving the Adhesion of Plasma Sprayed Tungsten Coatings
Authors (first, second and last of 13)
- Jiří Matějíček
- Monika Vilémová
- Daniel Dorow-Gerspach
- Content type: Peer Reviewed
- Published: 02 October 2019
- Pages: 1346 - 1362
-
Sodium Phosphate Post-treatment on Al Coating: Morphological and Corrosion Study
Authors (first, second and last of 9)
- Hwa-Rang Jeong
- Han-Seung Lee
- Fahid Aslam
- Content type: Peer Reviewed
- Published: 26 September 2019
- Pages: 1511 - 1531
-
Segmented Thermal Barrier Coatings for ID and OD Components Using the SinplexPro Plasma Torch
Authors
- Dianying Chen
- Riston Rocchio-Heller
- Christopher Dambra
- Content type: Peer Reviewed
- Published: 24 September 2019
- Pages: 1664 - 1673
-
Microwave-Assisted Post-processing of Detonation Gun-Sprayed Coatings for Better Slurry and Cavitation Erosion Resistance
Authors
- Abhishek Babu
- H. S. Arora
- H. S. Grewal
- Content type: Peer Reviewed
- Published: 23 September 2019
- Pages: 1565 - 1578
-
Enhanced Electrochemical and Tribological Properties of AZ91D Magnesium Alloy via Cold Spraying of Aluminum Alloy
Authors (first, second and last of 5)
- Sumera Siddique
- Cheng-Xin Li
- Muhammad Yasir
- Content type: Peer Reviewed
- Published: 20 September 2019
- Pages: 1739 - 1748
-
Development and Characterization of High-Velocity Flame Sprayed Ni/TiO2/Al2O3 Coatings on Hydro Turbine Steel
Authors
- Vibhu Sharma
- Manpreet Kaur
- Sanjeev Bhandari
- Content type: Peer Reviewed
- Published: 20 September 2019
- Pages: 1379 - 1401
-
Permanent Magnets Produced by Cold Spray Additive Manufacturing for Electric Engines
Authors
- Jean-Michel Lamarre
- Fabrice Bernier
- Content type: Peer Reviewed
- Published: 19 September 2019
- Pages: 1709 - 1717
-
Adhesion Enhancement of a Metallic Al Coating Fabricated by Detonation Gun Spray on a Modified Polymer Matrix Composite
Authors (first, second and last of 4)
- Yongjing Cui
- Mengqiu Guo
- Zhihui Tang
- Content type: Peer Reviewed
- Published: 17 September 2019
- Pages: 1730 - 1738
-
Influence of Nozzle Throat Cross Section on Microstructure and Properties of Cold Sprayed Coatings
Authors (first, second and last of 5)
- Naveen Manhar Chavan
- M. Vinod Kumar
- G. Sundararajan
- Content type: Peer Reviewed
- Published: 12 September 2019
- Pages: 1718 - 1729
-
A Method to Estimate the Optical Thickness of an Opaque Stream of Particles Based on Particle Rate, Size and Velocity Measurements as A Necessity to Enable Tomographic Analysis
Authors (first, second and last of 5)
- M. Szulc
- S. Kirner
- J. Schein
- Content type: Peer Reviewed
- Published: 06 September 2019
- Pages: 1627 - 1635
-
Characterization of the Gradient (Mo, Re)Si2/Mo-Re Coatings Deposited in the Hybrid Process
Authors (first, second and last of 4)
- Grzegorz Moskal
- Damian Migas
- Adriana Wrona
- Content type: Peer Reviewed
- Open Access
- Published: 06 September 2019
- Pages: 1532 - 1553
-
Influence of Heat Treatment and Sealing on Hot Corrosion Behavior of 80Ni-20Cr Coatings
Authors
- Harkulvinder Singh
- Sukhpal Singh Chatha
- Hazoor Singh Sidhu
- Content type: Peer Reviewed
- Published: 05 September 2019
- Pages: 1478 - 1491
-
Depositing Al-Based Metallic Coatings onto Polymer Substrates by Cold Spray
Authors (first, second and last of 4)
- M. R. Rokni
- P. Feng
- S. R. Nutt
- Content type: Peer Reviewed
- Published: 05 September 2019
- Pages: 1699 - 1708
-
A Study on the Corrosion Inhibition of Fe-Based Amorphous/Nanocrystalline Coating Synthesized by High-Velocity Oxy-Fuel Spraying in an Extreme Environment
Authors (first, second and last of 6)
- Sapan K. Nayak
- Anil Kumar
- Tapas Laha
- Content type: Peer Reviewed
- Published: 04 September 2019
- Pages: 1433 - 1447
-
Acoustic Emission and Associated Damage Mechanism Analysis in 8YSZ Thermal Barrier Coatings Under Instrumented Indentation
Authors (first, second and last of 4)
- Wei-Xiang Weng
- Jian-liang Cao
- Qiang Li
- Content type: Peer Reviewed
- Published: 03 September 2019
- Pages: 1651 - 1663
-
Numerical Simulation and Experimental Study of Heat Accumulation in Cylinder Parts During Internal Rotating Plasma Spraying
Authors (first, second and last of 9)
- Shu-yu Ding
- Peng-fei He
- Bin-shi Xu
- Content type: Peer Reviewed
- Published: 03 September 2019
- Pages: 1636 - 1650
-
Low-Pressure Cold Spraying of Copper–Graphite Solid Lubricating Coatings on Aluminum Alloy 7075-T651
Authors (first, second and last of 6)
- Wenyuan Chen
- Yuan Yu
- Jun Yang
- Content type: Peer Reviewed
- Published: 27 August 2019
- Pages: 1688 - 1698
-
A Review on Suspension Thermal Spray Patented Technology Evolution
Authors (first, second and last of 5)
- Maniya Aghasibeig
- Fariba Tarasi
- Christian Moreau
- Content type: Review
- Published: 22 August 2019
- Pages: 1579 - 1605
-
Dynamic Behavior of Arc Voltage and Electro-thermal Efficiency in Atmospheric Pressure Non-transferred Arc Plasma Torches under Different Degrees of Anode Cooling
Authors (first, second and last of 4)
- N. Tiwari
- S. Nath
- S. Ghorui
- Content type: Peer Reviewed
- Published: 21 August 2019
- Pages: 1606 - 1626
-
Slurry Erosion Behavior of HVOF-Sprayed WC-10Co-4Cr Coated SS 316 Steel with and Without PTFE Modification
Authors
- Anuj Bansal
- Jagtar Singh
- Harpreet Singh
- Content type: Peer Reviewed
- Published: 19 August 2019
- Pages: 1448 - 1465
-
A new Metallic Thermal Barrier Coating System for Rocket Engines: Failure Mechanisms and Design Guidelines
Authors
- T. Fiedler
- J. Rösler
- M. Bäker
- Content type: Peer Reviewed
- Published: 05 August 2019
- Pages: 1402 - 1419
-
Characterization and Accelerated Erosion Testing of WC-Co-Cr- and CoNiCrAlY-Coated CA6NM Turbine Steel
Authors
- Deepak Kumar Goyal
- Harpreet Singh
- Harmesh Kumar
- Content type: Peer Reviewed
- Published: 31 July 2019
- Pages: 1363 - 1378
-
Post-processing of Ni-Cr-Al2O3 Thermal Spray Coatings Through Friction Stir Processing for Enhanced Erosion–Corrosion Performance
Authors (first, second and last of 6)
- M. Rani
- G. Perumal
- H. S. Arora
- Content type: Peer Reviewed
- Published: 15 July 2019
- Pages: 1466 - 1477
-
The Effect of Hot Treatment on Composition and Microstructure of HVOF Iron Aluminide Coatings in Na2SO4 Molten Salts
Authors (first, second and last of 5)
- C. Senderowski
- N. Cinca
- J. M. Guilemany
- Content type: Peer Reviewed
- Open Access
- Published: 08 July 2019
- Pages: 1492 - 1510