1. Simulation machining of fiber-reinforced composites: A review

   • Jinguang Du
   • Miao Geng
   • Jun Ma

   Critical Review 02 July 2021 Pages: 1 - 15

   

2. Correction to: Simulation machining of fiber-reinforced composites: A review

   • Jinguang Du
   • Miao Geng
   • Jun Ma

   Correction 08 September 2021 Pages: 17 - 17

   

3. Recent development of the novel riveting processes

   • Jinliang Wu
   • Chao Chen
   • Haijun Li

   Critical Review 26 July 2021 Pages: 19 - 47

   

4. Taguchi grey relational analysis on the mechanical properties of natural hydroxyapatite: effect of sintering parameters

   • Johnson Kehinde Abifarin

   ORIGINAL ARTICLE 20 May 2021 Pages: 49 - 57

   

5. Splice design and electromagnetic analysis of a long-stroke maglev guideway for machine tools

   • Longxue Xiao

   ORIGINAL ARTICLE 08 May 2021 Pages: 59 - 66

   

6. Investigation on the stress-strain rate curve of MR fluids in a combined mode and its application in sheet flexible-die forming

   • Peng-yi Wang
   • Ge-hui Wan
   • Nan Xiang

   ORIGINAL ARTICLE 22 May 2021 Pages: 67 - 79

   

7. Formation of metal composites by detonation spray of powder mixtures

   • Vladimir Yu. Ulianitsky
   • Denis K. Rybin
   • Evgeny Trofimov

   ORIGINAL ARTICLE 22 July 2021 Pages: 81 - 95

   

8. Detection of residual stress in friction stir welding of heterogeneous aluminum/copper sheets—ultrasonic method

   • Arman Valizadeh
   • Hamid Montazerolghaem
   • Javad Jafari Fesharaki

   ORIGINAL ARTICLE 24 July 2021 Pages: 97 - 108

   

9. Performance evaluation of composite electrostatic spraying (CES) in milling process

   • Yu Su
   • Xiaorong Hu
   • Zhiqiang Liu

   ORIGINAL ARTICLE 26 July 2021 Pages: 109 - 123

   

10. Customer behaviour–based multi-objective approach for the recovery and remanufacturing of used products: application to smartphone reconditioning process

    • Latifa Belhocine
    • Mohammed Dahane
    • Mohammed Yagouni

    ORIGINAL ARTICLE 26 July 2021 Pages: 125 - 146

    

11. Distortion of a polycrystalline Al bar in a vice fixture: molecular dynamics analysis of grain movement and rotation

    • Vardan Hoviki Vardanyan
    • Barbara S. Linke
    • Herbert M. Urbassek

    ORIGINAL ARTICLE Open access 27 July 2021 Pages: 147 - 158

    

12. Effects of ultrasonic vibration-assisted compression of stainless steel 316L produced by laser powder bed fusion

    • Chung-Wei Cheng
    • Teoh Boon How
    • Ching-Hua Hung

    ORIGINAL ARTICLE 27 July 2021 Pages: 159 - 165

    

13. Study on the influencing factors of the deformation in the process of gear shaping

    • Xiuxu Zhao
    • Qingzhuang Liu
    • Peng Chen

    ORIGINAL ARTICLE 27 July 2021 Pages: 167 - 185

    

14. Prediction and experimental study on thermal stress in multi-tooth form grinding of cycloid gear

    • Jianxin Su
    • Hao Zhang
    • Shaowu Nie

    ORIGINAL ARTICLE 27 July 2021 Pages: 187 - 198

    

15. Manufacturing of Ni-based superalloy thin-walled components by complex strain-path spinning combined with solution heat treatment

    • Gangfeng Xiao
    • Qinxiang Xia
    • Xiuquan Cheng

    ORIGINAL ARTICLE 27 July 2021 Pages: 199 - 215

    

16. Improving the delamination resistance of CFRP by establishing and analyzing the micro-mechanical model

    • Hong Xiao
    • Chenping Zhang
    • Hongxiao Wang

    ORIGINAL ARTICLE 28 July 2021 Pages: 217 - 226

    

17. Preventing nugget shifting in joining of dissimilar steels via resistance element welding: a numerical simulation

    • Zhenghua Rao
    • Lei Liu
    • Jiangwei Liu

    ORIGINAL ARTICLE 28 July 2021 Pages: 227 - 241

    

18. Micro-removal mechanism of high volume fraction SiCp/Al composite in grinding based on cohesive theory

    • Peng Gu
    • Chuanmin Zhu
    • Yiqing Yu

    ORIGINAL ARTICLE 28 July 2021 Pages: 243 - 265

    

19. Stiffness enhancement analysis of ultrasonic-assisted milling titanium alloy curved thin-walled parts

    • Jinglin Tong
    • Penghui Zai
    • Zhiming Zhang

    ORIGINAL ARTICLE 28 July 2021 Pages: 267 - 277

    

20. Theoretical analysis, finite element modelling, and experimental investigation of manufacturing convoluted spiral tubes through free bending forming technology

    • Wei Wang
    • Ali Abd El-Aty
    • Jie Tao

    ORIGINAL ARTICLE 28 July 2021 Pages: 279 - 293

    

21. Numerical analysis of the non-stationary thermal state of the tool in the combined casting and extrusion of aluminum alloy

    • Alexander Petrovich Skuratov
    • Natal’ya Petrovna Popiyakova
    • Dmitriy Nikolaevich Bozhko

    ORIGINAL ARTICLE 28 July 2021 Pages: 295 - 303

    

22. Multi-objective optimization and finite element method combined with optimization via Monte Carlo simulation in a stamping process under uncertainty

    • Aneirson Francisco da Silva
    • Fernando Augusto Silva Marins
    • Erica Ximenes Dias

    ORIGINAL ARTICLE 28 July 2021 Pages: 305 - 327

    

23. The influence of ice-based fixture on suppressing machining-induced deformation of cantilever thin-walled parts: a novel and green fixture

    • Haibo Liu
    • Chengxin Wang
    • Yongqing Wang

    ORIGINAL ARTICLE 28 July 2021 Pages: 329 - 341

    

24. Characterizations of polymer injection molding tools with conformal cooling channels fabricated by direct and indirect rapid tooling technologies

    • Chil-Chyuan Kuo
    • Shao-Xuan Qiu
    • Heng-Qian He

    ORIGINAL ARTICLE 28 July 2021 Pages: 343 - 360

    

25. Complex product manufacturing and operation and maintenance integration based on digital twin

    • Yunrui Wang
    • Wenzhe Ren
    • Chuanwei Zhang

    ORIGINAL ARTICLE 28 July 2021 Pages: 361 - 381

    

26. Preparation of Ti/Al composite plates by differential temperature rolling with induction heating

    • Chao Yu
    • Zhibin He
    • Hong Xiao

    ORIGINAL ARTICLE 29 July 2021 Pages: 383 - 394

    

27. The ontology-based modeling and evolution of digital twin for assembly workshop

    • Qiangwei Bao
    • Gang Zhao
    • Wei Wang

    ORIGINAL ARTICLE 29 July 2021 Pages: 395 - 411

    

28. Research on the rheological characteristic of magnetorheological shear thickening fluid for polishing process

    • Yinghui Ren
    • Sanfeng Yang
    • Wei Li

    ORIGINAL ARTICLE 29 July 2021 Pages: 413 - 423

    

29. Real-time thermal error prediction model for CNC lathes using a new one-dimension lumped capacity method

    • Tie-jun Li
    • Chun-yu Zhao
    • Yi-min Zhang

    ORIGINAL ARTICLE 29 July 2021 Pages: 425 - 436

    

30. The technology, economy, and environmental sustainability of isotropic superfinishing applied to electron-beam melted Ti-6Al-4V components

    • Eleonora Atzeni
    • Angioletta R. Catalano
    • Alessandro Salmi

    ORIGINAL ARTICLE Open access 29 July 2021 Pages: 437 - 453

    

31. Effect of preheating on joint quality in the friction stir welding of bimodal high density polyethylene

    • Razi Ur Rehman
    • Jamal Sheikh-Ahmad
    • Suleyman Deveci

    ORIGINAL ARTICLE 30 July 2021 Pages: 455 - 468

    

32. Characterization of microstructure and selected properties of SnSbCu alloy after FSP

    • Joanna Hrabia-Wiśnios
    • Beata Leszczyńska-Madej
    • Aleksandra Węglowska

    ORIGINAL ARTICLE Open access 30 July 2021 Pages: 469 - 479

    

33. Multiphysics modelling of the mechanical properties in polymers obtained via photo-induced polymerization

    • Roberto Brighenti
    • Mattia Pancrazio Cosma
    • Michele Terzano

    ORIGINAL ARTICLE Open access 30 July 2021 Pages: 481 - 499

    

34. Optimization of the countersinking parameters based on the response surface method

    • Hassen Mosbah
    • Slimen Attyaoui
    • Rachid Nasri

    ORIGINAL ARTICLE 30 July 2021 Pages: 501 - 510

    

35. Electromagnetic attraction bulging of small aluminum alloy tube based on a field shaper

    • Qi Xiong
    • Dun Gao
    • Xiang Zhao

    ORIGINAL ARTICLE 30 July 2021 Pages: 511 - 521

    

36. A numerical failure analysis of laser micromachining in various thermoplastics

    • Kaveh Moghadasi
    • Khairul Fikri Tamrin
    • Mohammad Jawaid

    ORIGINAL ARTICLE 30 July 2021 Pages: 523 - 538

    

37. Optimisation of cutting fluid concentration and operating parameters based on RSM for turning Ti–6Al–4V

    • Salah Gariani
    • Mahmoud Ahmed El-Sayed
    • Islam Shyha

    ORIGINAL ARTICLE Open access 30 July 2021 Pages: 539 - 553

    

38. Online chatter detection in robotic machining based on adaptive variational mode decomposition

    • Qizhi Chen
    • Chengrui Zhang
    • Teng Wang

    ORIGINAL ARTICLE 30 July 2021 Pages: 555 - 577

    

39. Investigation, modeling, and optimization of surface roughness in micro-milling of graphite electrodes

    • Goran Mijušković
    • Djordje Cica

    ORIGINAL ARTICLE 30 July 2021 Pages: 579 - 590

    

40. Design of an innovative new extrusion system for a printing machine for ceramics

    • Jihad EL Mesbahi
    • Irene Buj-Corral
    • Abdelilah EL Mesbahi

    ORIGINAL ARTICLE 31 July 2021 Pages: 591 - 603

    

41. Correction to: Design of an innovative new extrusion system for a printing machine for ceramics

    • Jihad EL Mesbahi
    • Irene Buj-Corral
    • Abdelilah EL Mesbahi

    Correction 21 August 2021 Pages: 605 - 605

42. Bead geometry prediction using multiple linear regression analysis

    • Sarah Milhomme
    • Julie Lartigau
    • Catherine Froustey

    ORIGINAL ARTICLE 31 July 2021 Pages: 607 - 620

    

43. Relationship between pulsed laser energy and fracture mode in multiple-pulse laser shock bulging process

    • Yan Li
    • Zheng Liu
    • Chao Zheng

    ORIGINAL ARTICLE 31 July 2021 Pages: 621 - 633

    

44. Plastic behavior-dependent weldability of heat-treatable aluminum alloys in friction stir welding

    • Danilo Ambrosio
    • Vincent Wagner
    • Olivier Cahuc

    ORIGINAL ARTICLE 31 July 2021 Pages: 635 - 652

    

45. A novel method for improving drilling performance of CFRP/Ti6AL4V stacked materials

    • Nafiz Yaşar
    • Mehmet Erdi Korkmaz
    • Mustafa Günay

    ORIGINAL ARTICLE 31 July 2021 Pages: 653 - 673

    

46. Investigation on damage evolution and acoustic emission behavior of aluminum alloy sheet during blanking process

    • Pengjing Zhao
    • Jingpin Jiao
    • Gang Fang

    ORIGINAL ARTICLE 31 July 2021 Pages: 675 - 688

    

47. Correction to: Determination of minimum uncut chip thickness under various machining conditions during micro-milling of Ti-6Al-4V

    • Hamed Rezaei
    • Mohammad Hossein Sadeghi
    • Erhan Budak

    Correction 14 August 2021 Pages: 689 - 690