Articles

1. Countdown to IMAT 2024

   • Andrew Kitahara

   Guest Editorial 15 May 2024

   

2. Metallographic and Extraction Replica Methods for Characterization of Tungsten Heavy Alloy: H13 Clads

   • Jerry Kovacich
   • Dennis Harwig
   • Andreas Endemann

   Original Research Article Open access 15 May 2024

   

3. Modeling of Grain Size Change and Phase Transformation of Stainless Wire during Drawing with Cryogenic Cooling

   • Andrey Volokitin
   • Irina Volokitina
   • Evgeniy Panin

   Technical Note 13 May 2024

   

4. Effect of Aging Heat Treatment on Microstructure and Properties of Al–Cu–Mg Alloy

   • Mitushi Agrawal
   • Gaurav Mittal
   • Ajaya Kumar Pradhan

   Original Research Article 13 May 2024

   

5. Annealing of an Austenitic Stainless Steel Deformed Under Shear Loading

   • Aqil Zergani
   • Hamed Mirzadeh
   • Reza Mahmudi

   Original Research Article 13 May 2024

   

6. EBSD Study of the Effect of Post-weld Intercritical Annealing on the Microstructure and Micro-texture of a Friction Stir Welded DP600 Steel

   • H. Ashrafi
   • M. Shamanian
   • J. A. Szpunar

   Original Research Article 10 May 2024

   

7. Optimizing Thermomechanical Processing Routes to Achieve Desired Grain Size in SS 304 Using Response Surface Methodology

   • Ashish Jain
   • Abhinav Varshney

   Original Research Article 10 May 2024

   

8. Feasibility Examination of the Field Multi-focal Metallography Method (FMM) for Characterisation of Metallic Marine Artefacts

   • N. Iddan
   • D. Ashkenazi
   • D. Cvikel

   Original Research Article Open access 06 May 2024

   

9. Influence of Post-weld Heat Treatment on Microstructure and Corrosion Behavior of Dissimilar Friction Welded Joint of IN713LC Superalloy and AISI 4140 Steel

   • Vijay T. Gaikwad
   • M. K. Mishra
   • R. K. P. Singh

   Original Research Article 29 April 2024

   

10. Effect of Low-temperature Annealing on Mechanical Properties of Warm-rolled High Silicon Steel Produced by Twin-roll Strip Casting

    • You Zhou
    • Cheng Zhou
    • Yi Mao

    Original Research Article 29 April 2024

    

11. Effect of Initial 〈0001〉||RD Orientation on the Rolling Texture of AZ91 Alloy

    • Ebrahim Tolouie
    • Roohollah Jamaati

    Original Research Article 24 April 2024

    

12. Dialogue with Emerging Engineers

    Feature 23 April 2024

    

13. Can You Identify the Microstructure?

    Mystery Micro 12 April 2024

    

14. Microstructural Features Intimated in Automotive Grade IF Steel Subjected to Conventional and Severe Shot Peening

    • Bibekananda Sahoo
    • K. Udaya Bhat

    Original Research Article 09 April 2024

    

15. MicroArt

    Feature 25 March 2024

    

16. Archeometallurgical Investigation of a Fragment from a Medieval Sword Blade

    • Paolomarco Merico
    • Michela Faccoli
    • Giovanna Cornacchia

    Original Research Article Open access 22 March 2024

    

17. Effect of Post-ECAP Annealing on the Microstructure and Mechanical Properties of Commercially Pure Titanium

    • K. Hajizadeh
    • B. Eghbali
    • K. J. Kurzydlowski

    Original Research Article 20 March 2024

    

18. Modeling and Prediction of a 3G-980HF Spot Weld Shear Strength Using Response Surface Methodology

    • Mansour N. Elhemri
    • O. Elmabrouk
    • Abdelbaset R. H. Midawi

    Original Research Article 20 March 2024

    

19. Correction: Color Band Formation on Heated Steel Bars and Subsequent Formation of Pearlite Versus Spheroidite on Slow Cooling

    • Tim Zowada
    • Kevin Cashen
    • J. D. Verhoeven

    Correction 18 March 2024

20. Thank You to Our Volunteer Guest Editors and Reviewers

    Announcement 14 March 2024

21. 2024 Henry Clifton Sorby Award

    Society 11 March 2024

    

22. Correction: Effects of Homogenization Heat Treatment on Microstructure, Mechanical and Corrosion Properties of Transient Liquid Phase (TLP)-Bonded Inconel 617/AISI 310 Stainless Steel

    • Vahid Salehi Mobarakeh
    • Behzad Niroumand

    Correction 06 March 2024

23. Influence of Cold Rolling on the Microstructure and Mechanical Properties of FeCoCrNiMn High-Entropy Alloy

    • Mohamad Ahl Sarmadi
    • Masoud Atapour
    • Mehdi Alizadeh

    Original Research Article 04 March 2024

    

24. Effect of Different Post Processing Techniques on Microstructure and Mechanical Properties of Atmospheric Plasma Sprayed WC-17Co Coatings

    • Dmitry Dzhurinskiy
    • Abhishek Babu
    • Oleg Dubinin

    Original Research Article 02 March 2024

    

25. Impact of Different Heat Treatments on the Mechanical Properties and Microstructure of Precipitation-Hardened Stainless Steel Fabricated by Laser Powder Bed Fusion

    • Juan Negron
    • Majed Ali
    • Ala Qattawi

    Original Research Article Open access 01 March 2024

    

26. Correction to: Evolution of Al₃₂Si₇Fe₄Co Intermetallic Phase in Cobalt Containing Al-Si-Fe Scrap Alloy

    • Kishor Modalavalasa
    • Battula Sri Rishith Satya Surya
    • A. K. Prasada Rao

    Correction 28 February 2024

27. Achieving Unusual Stable Textures in AZ91 Alloy by Asymmetric Hot Rolling

    • Ebrahim Tolouie
    • Roohollah Jamaati

    Original Research Article 28 February 2024

    

28. Effect of Boron Addition on the Microstructure, Thermal, and Mechanical Properties of Al-5%Mg-2%Ti Alloy

    • Hakan Yaykaşlı
    • Musa Göğebakan

    Original Research Article 21 February 2024

    

29. Announcing the Metallography, Microstructure, and Analysis 2023 Editor’s Choice Awards

    • Ryan M. Deacon

    Editorial 20 February 2024 Pages: 1 - 2

    

30. Evolution of Microstructure and Mechanical Properties Attainment in Fe–19Mn–0.6C–4Si–3Al–0.04Nb Steel Upon Thermo-Mechanical Processing

    • Nicky Kisku

    Original Research Article 20 February 2024

    

31. MicroArt

    Feature 16 February 2024 Pages: 191 - 191

    

32. Microstructure and Mechanical Properties of Heat-Treated High-Nitrogen Martensitic Stainless Steel

    • Harish Singh Dhami
    • Nellori Dileep Kumar
    • P. Chakravarthy

    Original Research Article 14 February 2024 Pages: 96 - 105

    

33. Effect of Rare Earth Elements Addition and Sintering Conditions on the Microstructure and Microhardness of Inconel 718

    • H. M. Medrano-Prieto
    • A. Santos-Beltrán
    • R. Martínez-Sánchez

    Original Research Article 13 February 2024 Pages: 181 - 187

    

34. Understanding the Subsurface Microstructure and Thermal Behavior of Model Oxide Dispersion Strengthened Alloys Through FIB_SEM and TEM

    • K. G. Raghavendra
    • M. Sivakumar
    • Arup Dasgupta

    Original Research Article Open access 13 February 2024 Pages: 86 - 95

    

35. Microstructure Evolution in 304L Stainless Steel Cladding Produced by Additive Friction Stir Deposition

    • B. E. T. Roper
    • C. M. Roper
    • P. G. Allison

    Original Research Article 12 February 2024 Pages: 174 - 180

    

36. Can You Identify the Microstructure?

    Mystery Micro 09 February 2024 Pages: 198 - 199

    

37. Microstructure and Hardness Investigation of Tribaloy Alloy T-400C Hardfacing Deposited on Nickel-Based Alloy Inconel 740H via Plasma Transferred Arc Welding Subjected to Long-Time Aging

    • X. Z. Zhang
    • R. Liu
    • F. Khelfaoui

    Original Research Article 09 February 2024 Pages: 145 - 173

    

38. Effect of Preheating Temperature on Microstructure and Mechanical Properties of Friction Stir Welded DMR249A HSLA Steel Joints

    • Seerangan Ragu Nathan
    • Visvalingam Balasubramanian
    • Mikhail Ivanov

    Original Research Article 09 February 2024 Pages: 68 - 85

    

39. 2024 International Metallographic Contest (IMC) and Exhibit

    Society 05 February 2024 Pages: 194 - 197

    

40. Dialogue with Emerging Engineers

    • David Lammers, University of South Dakota

    Feature 29 January 2024 Pages: 188 - 190

    

41. Statistical Distribution of Si Phases at Different Sr Levels in AlSi₉ Alloys

    • İbrahim Halil Kalkan
    • İbrahim Göksel Hızlı
    • Derya Dispinar

    Original Research Article 24 January 2024 Pages: 130 - 144

    

42. Prevalence of Heteroepitaxial Recrystallization in the Low Solvus High Refractory (LSHR) γ–γ′ Superalloy

    • Y. Lee
    • E. Hershkovitz
    • V. M. Miller

    Original Research Article 23 January 2024 Pages: 114 - 129

    

43. A Hypothesis for the Mechanism that Produces the Utsuri Pattern on Japanese Swords

    • Tim Zowada
    • J. D. Verhoeven

    Original Research Article 23 January 2024 Pages: 62 - 67

    

44. Production and Characterization of an Economical 1100 MPa Advanced High-Strength Silicon-Containing Steel

    • Hossam Halfa
    • Amer Eid Amer
    • Mamdouh Eissa

    Original Research Article Open access 10 January 2024 Pages: 40 - 61

    

45. Effects of Homogenization Heat Treatment on Microstructure, Mechanical and Corrosion Properties of Transient Liquid Phase (TLP)-Bonded Inconel 617/AISI 310 Stainless Steel

    • Vahid Salehi Mobarakeh
    • Behzad Niroumand

    Original Research Article 09 January 2024 Pages: 29 - 39

    

46. Artistic Entries from the 2023 International Metallographic Contest

    Society 21 December 2023 Pages: 192 - 193

    

47. Significant Texture Weakening of AZ91 Alloy by Asymmetric Hot Rolling

    • Ebrahim Tolouie
    • Roohollah Jamaati

    Original Research Article 14 December 2023 Pages: 106 - 113

    

48. Mechanical and Biocorrosion Properties of Ti-XSn (X = 0, 5, 10, 15 wt.%) Alloys for Biomedical Application Fabricated by Powder Metallurgy

    • Mojtaba Najafizadeh
    • Mansoor Bozorg
    • Pasquale Cavaliere

    Original Research Article 14 December 2023 Pages: 18 - 28

    

49. A Study of the Divorced Eutectoid Transformation, DET, in Eutectoid Composition Plain Carbon Steel

    • Tim Zowada
    • J. D. Verhoeven

    Original Research Article 14 December 2023 Pages: 3 - 17

    

50. A Preview of a Special Issue on Quantitative Metallography and Microstructure Modeling

    • Ryan M. Deacon

    Editorial 06 December 2023 Pages: 881 - 882