1. A complementary approach to experimental modeling and analysis of welding processes: dimensional analysis

   • Zhuoyong Liang
   • Yonghua Shi
   • Jiatong Zhan

   Critical Review 12 June 2023 Pages: 3077 - 3095

   

2. A review on theories/methods to obtain surface topography and analysis of corresponding affecting factors in the milling process

   • Yuwen Sun
   • Yang Liu
   • Qiang Guo

   Critical Review 14 June 2023 Pages: 3097 - 3131

   

3. Correction to: A review on theories/methods to obtain surface topography and analysis of corresponding affecting factors in the milling process

   • Yuwen Sun
   • Yang Liu
   • Qiang Guo

   Correction 19 June 2023 Pages: 3133 - 3133

4. Recent research progress of foam metals welding: a review

   • Mengnan Feng
   • Liang Ren
   • Peng Wang

   Critical Review 16 June 2023 Pages: 3135 - 3156

   

5. Theoretical and experimental investigations of tool wear in ultrasonic vibration–assisted turning of 304 austenitic stainless steel

   • Yingshuai Xu
   • Jie Zhang
   • Jing He

   ORIGINAL ARTICLE 10 June 2023 Pages: 3157 - 3181

   

6. A hybrid machine learning model for in-process estimation of printing distance in laser Directed Energy Deposition

   • Kandice S. B. Ribeiro
   • Henrique H. L. Núñez
   • Reginaldo T. Coelho

   ORIGINAL ARTICLE Open access 10 June 2023 Pages: 3183 - 3194

   

7. Influence of shielding gas coverage during laser hot-wire cladding with high carbon steel

   • Laura Budde
   • Kai Biester
   • Ludger Overmeyer

   ORIGINAL ARTICLE Open access 10 June 2023 Pages: 3195 - 3207

   

8. Positioning of a conical cutter for centrifugal blade finish machining based on the best uniform approximation (BUA) method

   • Lei Dong

   ORIGINAL ARTICLE 10 June 2023 Pages: 3209 - 3219

   

9. A simulation method for the optimization of cooling water slot structure in slab continuous casting mold combined with submerged entry nozzle

   • Sang Chol Om
   • Dong Gil Kim
   • Il Un Kim

   ORIGINAL ARTICLE 10 June 2023 Pages: 3221 - 3237

   

10. An analysis of the hot forming characteristics of diffusion-bonded TC4 alloy using processing maps

    • Sardar Muhammad Imran
    • Can Li
    • Xiaoxing Li

    ORIGINAL ARTICLE 12 June 2023 Pages: 3239 - 3253

    

11. Mechanical and microstructural characterization of aluminium micro-pins realized by cold metal transfer

    • Christian Schneider-Bröskamp
    • Martin Schnall
    • Stephan Ucsnik

    ORIGINAL ARTICLE Open access 12 June 2023 Pages: 3255 - 3267

    

12. Tool wear mechanisms of PCD micro end mill in machining of additive manufactured titanium alloy

    • Zhongwei Chen
    • Xian Wu
    • Congfu Fang

    ORIGINAL ARTICLE 12 June 2023 Pages: 3269 - 3280

    

13. Impact damage prediction of CFRP laminates with rubber protective layer using back-propagation neural networks

    • Ximing Li
    • Ping Liu
    • Kaifu Zhang

    ORIGINAL ARTICLE 13 June 2023 Pages: 3281 - 3296

    

14. Investigation and optimization of structural parameters for the forming quality and mechanical properties of CFRP/Al self-piercing riveting

    • Dewen Kong
    • Dengfeng Wang
    • Zifeng Zhang

    ORIGINAL ARTICLE 13 June 2023 Pages: 3297 - 3313

    

15. Research solution for automatic hole quality analysis when drilling fiber-reinforced composites

    • Andrii Hrechuk
    • Mikael Hörndahl
    • Fredrik Schultheiss

    ORIGINAL ARTICLE Open access 13 June 2023 Pages: 3315 - 3324

    

16. Influence of the mechanism of gluing processes on the strength of clinch-adhesive hybrid joining process of steel/aluminum plates

    • Wang Menghan
    • Du Menglong
    • Li Lei

    ORIGINAL ARTICLE 13 June 2023 Pages: 3325 - 3336

    

17. Exploring the mechanics of adhesion in metal cutting

    • Inge Svenningsson
    • Kourosh Tatar

    ORIGINAL ARTICLE Open access 13 June 2023 Pages: 3337 - 3356

    

18. Microstructure evolution, hardness response, and corrosion resistance of Inconel 625 weld overlay obtained by the ESSC process after post-welding heat treatments

    • Manuel J. C. Lourenço
    • Jorge C. F. Jorge
    • Leonardo S. Araújo

    ORIGINAL ARTICLE 14 June 2023 Pages: 3357 - 3369

    

19. Prediction model of part topography in curved surface inkjet 3D printing

    • Bu Ping
    • Jin Huang
    • Fanbo Meng

    ORIGINAL ARTICLE 14 June 2023 Pages: 3371 - 3384

    

20. A novel deflection control method for the asymmetric thin-walled component by optimizing the feed rate of the finishing process

    • Zhongxi Zhang
    • Longhao Wang
    • Aituan Jiang

    ORIGINAL ARTICLE 14 June 2023 Pages: 3385 - 3395

    

21. New linkage control methods based on the trajectory distribution of galvanometer and mechanical servo system for large-range high-feedrate laser processing

    • Xintian Wang
    • Xuesong Mei
    • Zhuobo Dong

    ORIGINAL ARTICLE 14 June 2023 Pages: 3397 - 3411

    

22. Experimental research and multi-objective optimization of ultrasonic vibration–assisted EDM for Ti6Al4V micro-holes

    • Peng Zhang
    • Zhen Yin
    • Kun Zhang

    ORIGINAL ARTICLE 14 June 2023 Pages: 3413 - 3425

    

23. Effect of surface topography of fiber laser dressed resin-bond diamond wheel on its grinding performance

    • Fengrong Luo
    • Yinghui Ren
    • Mingquan Li

    ORIGINAL ARTICLE 14 June 2023 Pages: 3427 - 3440

    

24. Prediction of residual stress, surface roughness, and grain refinement of 42CrMo steel subjected to shot peening by combining finite element method and artificial neural network

    • Haiquan Huang
    • Senhui Wang
    • Xiaogui Wang

    ORIGINAL ARTICLE 14 June 2023 Pages: 3441 - 3461

    

25. Surface polishing of additively manufactured Ti6Al4V titanium alloy by using a nanosecond pulse laser

    • Pakin Jaritngam
    • Viboon Saetang
    • Chaiya Dumkum

    ORIGINAL ARTICLE 14 June 2023 Pages: 3463 - 3480

    

26. Establishing Equal-Channel Angular Pressing (ECAP) for sheet metals by using backpressure: manufacturing of high-strength aluminum AA5083 sheets

    • Maximilian Gruber
    • Christian Illgen
    • Wolfram Volk

    ORIGINAL ARTICLE Open access 14 June 2023 Pages: 3481 - 3495

    

27. Experimental investigations on weak magnetization-enhanced force-rheological polishing of SiC mold

    • Dongdong Zhou
    • Xiangming Huang
    • Xiyang Li

    ORIGINAL ARTICLE 14 June 2023 Pages: 3497 - 3512

    

28. Optimizing process parameters of a material extrusion–based overprinting technique for the fabrication of tensile specimens

    • Ke Gong
    • Handai Liu
    • Ian Major

    ORIGINAL ARTICLE 15 June 2023 Pages: 3513 - 3524

    

29. Surface modification of aluminum alloy by wire electrical discharge machining with SiC nanofluid dielectric

    • Cuixia Guo
    • Xing Wang
    • Sheng Lai

    ORIGINAL ARTICLE 15 June 2023 Pages: 3525 - 3536

    

30. The effect of process parameters on the stability and efficiency in the laser powder bed fusion of Ti-6Al-4 V based on the interval powder layer thickness

    • Peng Wang
    • Dongju Chen
    • Gang Li

    ORIGINAL ARTICLE 15 June 2023 Pages: 3537 - 3556

    

31. Formation mechanism of CFRP pipe concave drilling defects

    • Xinyi Qiu
    • Pengnan Li
    • Tae Jo Ko

    ORIGINAL ARTICLE 15 June 2023 Pages: 3557 - 3567

    

32. Process monitoring of the AISI D6 steel turning using artificial neural networks

    • Victor Hugo Serafim Rubin
    • Leonardo Rosa Ribeiro da Silva
    • Alisson Rocha Machado

    ORIGINAL ARTICLE 15 June 2023 Pages: 3569 - 3584

    

33. Investigation on cutting damage mechanism of carbon fiber reinforced polymer based on macro/microscopic simulation

    • Zhaoju Zhu
    • Rongqing Kang
    • Xinhui Sun

    ORIGINAL ARTICLE 15 June 2023 Pages: 3585 - 3597

    

34. Semantic segmentation of end mill wear area based on transfer learning with small dataset

    • Chang Chen
    • Chen Lin
    • Zuji Li

    ORIGINAL ARTICLE 16 June 2023 Pages: 3599 - 3609

    

35. In situ embedment of type K sheathed thermocouples with directed energy deposition

    • Luis Nuñez III
    • Piyush Sabharwall
    • Isabella J. van Rooyen

    ORIGINAL ARTICLE 16 June 2023 Pages: 3611 - 3623

    

36. Deep learning-based sustainable subsurface anomaly detection in Barker-coded thermal wave imaging

    • Muzammil Parvez
    • Ali Baig Mohammad
    • Carlo Santulli

    ORIGINAL ARTICLE 16 June 2023 Pages: 3625 - 3635

    

37. Influence mechanisms of tool geometry parameters on surface quality and subsurface damage in polycrystalline NiFeCr superalloys

    • Junqiang Jiang
    • Lihui Sun
    • Shengyong Liu

    ORIGINAL ARTICLE 16 June 2023 Pages: 3637 - 3653

    

38. Effects of silicon concentration on the magnetic and structural properties of nanostructured Fe-Si alloy synthesized by ball mill process

    • M’hamed Ouadah
    • Abderrahmane Younes

    ORIGINAL ARTICLE 17 June 2023 Pages: 3655 - 3663

    

39. Process chain for the mass production of polymeric microfluidic chips

    • Yanjun Lu
    • Bo Liu
    • Chunjin Wang

    ORIGINAL ARTICLE 17 June 2023 Pages: 3665 - 3680

    

40. NJUST-CCTD: An Image Database for Milling Tool Wear Classification with Deep Learning

    • Yi Pan
    • Guoda Xu
    • Yulin Wang

    ORIGINAL ARTICLE 19 June 2023 Pages: 3681 - 3698

    

41. Strategy with machine learning models for precise assembly using programming by demonstration

    • Ye Bai
    • Sheng-Jen Hsieh

    ORIGINAL ARTICLE 19 June 2023 Pages: 3699 - 3714

    

42. Energy analysis of the extrusion process through a streamlined Gaussian die

    • Shun Hu Zhang
    • Yi Zhang
    • Xin Ying Liu

    ORIGINAL ARTICLE 19 June 2023 Pages: 3715 - 3728

    

43. Bayesian diagnostic learning for a costly composite manufacturing: critical role of dataset size and auxiliary in situ measurements

    • Bryn Crawford
    • Milad Ramezankhani
    • Abbas S. Milani

    ORIGINAL ARTICLE 19 June 2023 Pages: 3729 - 3745

    

44. Advanced 3D additive manufacturing techniques for revolutionizing the next-generation rocket engine nozzle fabrication

    • Daniel J. Thomas

    ORIGINAL ARTICLE 19 June 2023 Pages: 3747 - 3760

    

45. Performance assessment of ultrathin sapphire wafer polishing with layer stacked clamping (LSC) method

    • Zhixiang Chen
    • Shunkai Han
    • Xianglei Zhang

    ORIGINAL ARTICLE 19 June 2023 Pages: 3761 - 3771

    

46. Influence of uncertain parameters on machining distortion of thin-walled parts

    • Xiaoyue Li
    • Hao Qi
    • Liang Li

    ORIGINAL ARTICLE 19 June 2023 Pages: 3773 - 3788

    

47. Comparative evaluation of AC and DC TIG-welded 5083 aluminium plates of different thickness

    • Regita Bendikiene
    • Rolandas Sertvytis
    • Antanas Ciuplys

    ORIGINAL ARTICLE 19 June 2023 Pages: 3789 - 3800

    

48. Investigation of the impact of the short fiber reinforcements on the thermal and mechanical properties of polymer-based composites manufactured by material extrusion

    • Mohammad Ahmadifar
    • Mohammadali Shirinbayan
    • Khaled Benfriha

    ORIGINAL ARTICLE 19 June 2023 Pages: 3801 - 3817

    

49. Digital twin for energy-efficient integrated process planning and scheduling

    • Mengke Sun
    • Zongyan Cai
    • Haonan Zhang

    ORIGINAL ARTICLE 19 June 2023 Pages: 3819 - 3837

    

50. Cu donor material assisted friction stir welding of AA2024 and AA6061 dissimilar alloys: Effect on downward force, temperature profile, and mechanical properties

    • Srinivasa Naik Bhukya
    • Zhenhua Wu
    • Yousuf Mohammed

    ORIGINAL ARTICLE 19 June 2023 Pages: 3839 - 3851