1. Study on liquid nano-atomization systems for minimum quantity lubrication—a review

   • Jaharah A. Ghani
   • Pin Han Yap
   • Wan Mohd. Faizal Wan Mahmood

   Critical Review 19 July 2022 Pages: 5637 - 5649

   

2. Inconel 718 produced by laser powder bed fusion: an overview of the influence of processing parameters on microstructural and mechanical properties

   • Ana Marques
   • Ângela Cunha
   • Flávio Bartolomeu

   Critical Review 27 July 2022 Pages: 5651 - 5675

   

3. Digital twin applications in aviation industry: A review

   • Minglan Xiong
   • Huawei Wang

   Critical Review 28 July 2022 Pages: 5677 - 5692

   

4. Modeling and simulation of metal selective laser melting process: a critical review

   • Ruihu Zhou
   • Haisheng Liu
   • Huifu Wang

   Critical Review 19 July 2022 Pages: 5693 - 5706

   

5. Correlation research on multi-field coupling of multi-track overlapping laser cladding process for nodular cast iron

   • Xing Han
   • Chang Li
   • Tenghui Jia

   Critical Review 29 July 2022 Pages: 5707 - 5729

   

6. Asymmetrical Pythagorean-hodograph spline-based \({{\mathrm{C}}}^{4}\) continuous local corner smoothing method with jerk-continuous feedrate scheduling along linear toolpath

   • Xin Jiang
   • Yifei Hu
   • Zhiming Zheng

   ORIGINAL ARTICLE 30 July 2022 Pages: 5731 - 5754

   

7. Temperature modeling and analysis of transfer bar using hot coil box technology

   • Geng-Sheng Ma
   • Lian-Yun Jiang
   • Xu-Dong Li

   ORIGINAL ARTICLE 20 July 2022 Pages: 5755 - 5766

   

8. Ambient temperature-induced thermal error modelling for a special CMM at the workshop level based on the integrated temperature regression method

   • Guangjie Jia
   • Jianbin Cao
   • Nuodi Huang

   ORIGINAL ARTICLE 22 July 2022 Pages: 5767 - 5778

   

9. Investigation of interfacial heat transfer characterization for TC4 alloy in triple-layer sheet hot stamping process

   • Jing Zhou
   • Xiaoming Yang
   • Yanhong Mu

   ORIGINAL ARTICLE 21 July 2022 Pages: 5779 - 5792

   

10. The influence of wear volume on surface quality in grinding process based on wear prediction model

    • Wei Cao
    • Zhao Han
    • Dong Wang

    ORIGINAL ARTICLE 29 July 2022 Pages: 5793 - 5809

    

11. Improvement of sintered tungsten-carbide surface integrity using femtosecond pulse lasers

    • Osamu Konda
    • Xiaoxu Liu
    • Fumihiro Itoigawa

    ORIGINAL ARTICLE 29 July 2022 Pages: 5811 - 5821

    

12. Influence of drawbead geometry and blank holder force on the dual phase steel formability

    • Alex Raimundo de Oliveira
    • Sérgio Fernando Lajarin
    • Paulo Victor Prestes Marcondes

    ORIGINAL ARTICLE 19 July 2022 Pages: 5823 - 5833

    

13. Exploring the concept of Cognitive Digital Twin from model-based systems engineering perspective

    • Lu Jinzhi
    • Yang Zhaorui
    • Kiritsis Dimitris

    ORIGINAL ARTICLE Open access 19 July 2022 Pages: 5835 - 5854

    

14. Constant force tracking using online stiffness and reverse damping force of variable impedance controller for robotic polishing

    • Hosham Wahballa
    • Jinjun Duan
    • Zhendong Dai

    ORIGINAL ARTICLE 29 July 2022 Pages: 5855 - 5872

    

15. Finite element analysis and experiment study on axial infeed hot rolling process of thread with Ti6Al4V

    • Fei Jiang
    • Shengdun Zhao
    • Liangyu Fei

    ORIGINAL ARTICLE 22 July 2022 Pages: 5873 - 5884

    

16. Study on nonuniform deformation behavior and mechanical properties of complex-shaped Ti-6Al-4 V extruded profiles with different lubrication conditions

    • Ying Zhang
    • Dongsheng Li
    • Zhibin Huang

    ORIGINAL ARTICLE 22 July 2022 Pages: 5885 - 5899

    

17. A stationary shoulder with fluid temperature control for friction stir welding of polymers: development and investigation

    • Erhard Buchmann
    • Michael Erdmann
    • Philipp Höfer

    ORIGINAL ARTICLE Open access 28 July 2022 Pages: 5901 - 5911

    

18. Application of CNN-BP on Inconel-718 chip feature and the influence on tool life

    • Shao-Hsien Chen
    • Ming-Jie Zhang

    ORIGINAL ARTICLE 23 July 2022 Pages: 5913 - 5930

    

19. Surface roughness prediction and optimization in the REMF process using an integrated DBN-GA approach

    • Jung-Hee Lee
    • Yun-Su Seo
    • Jae-Seob Kwak

    ORIGINAL ARTICLE 19 July 2022 Pages: 5931 - 5942

    

20. An analytical prediction model of strip crown based on multi-factor interaction mechanism

    • Zhi Qiang Li
    • Yuan Ming Liu
    • Qing Xue Huang

    ORIGINAL ARTICLE 21 July 2022 Pages: 5943 - 5955

    

21. Analysis of three-roller continuous and synchronous calibration process of straightness and ovality for large thin-walled pipes considering the weld

    • Xueying Huang
    • Jun Zhao
    • Chunge Wang

    ORIGINAL ARTICLE 21 July 2022 Pages: 5957 - 5969

    

22. Development of a fuzzy-AHP system to select the printing method for polycaprolactone (PCL)-based scaffolds

    • Lan Xuan Phung
    • Truong Do
    • Trung Kien Nguyen

    ORIGINAL ARTICLE 23 July 2022 Pages: 5971 - 5990

    

23. Spatial planetary movements for multi-axis EDM

    • Yan-Xin Sun
    • Ling Qin
    • Wan-Sheng Zhao

    ORIGINAL ARTICLE 21 July 2022 Pages: 5991 - 6004

    

24. A new method of determining forming limit diagram for sheet materials by using the magnetorheological elastomer forming process

    • Rui Zhang
    • Zhong-Jin Wang

    ORIGINAL ARTICLE 20 July 2022 Pages: 6005 - 6019

    

25. In-process identification of milling parameters based on digital twin driven intelligent algorithm

    • Charles Ming Zheng
    • Lu Zhang
    • Yongchao Xu

    ORIGINAL ARTICLE 21 July 2022 Pages: 6021 - 6033

    

26. Measurement of aspheric mirrors using arc-region scanning and data stitching technology

    • Menghui Lan
    • Bing Li
    • Xiuyuan Wu

    ORIGINAL ARTICLE 28 July 2022 Pages: 6035 - 6048

    

27. Study on the micro through holes machining using the electrochemical machining (ECM) method with a graphite electrode

    • Likuan Zhu
    • Jinhui Hao
    • Bei Wang

    ORIGINAL ARTICLE 29 July 2022 Pages: 6049 - 6057

    

28. Direct pulse current electromagnetic forming (DPCEMF): a novel electromagnetic forming technology for aluminum alloy sheet

    • Fei Feng
    • Jianjun Li
    • Suo Fan

    ORIGINAL ARTICLE 20 July 2022 Pages: 6059 - 6072

    

29. The approach to multi-objective optimization for process parameters of dry hobbing under carbon quota policy

    • Yifan Liu
    • Chunping Yan
    • Hengxin Ni

    ORIGINAL ARTICLE 23 July 2022 Pages: 6073 - 6094

    

30. Study on temperature of cylindrical wet grinding considering lubrication effect of grinding fluid

    • Yong Zheng
    • Changqing Wang
    • Fanming Meng

    ORIGINAL ARTICLE 22 July 2022 Pages: 6095 - 6109

    

31. Milling chatter identification by optimized variational mode decomposition and fuzzy entropy

    • Defeng Peng
    • Hongkun Li
    • Zhaodong Wang

    ORIGINAL ARTICLE 19 July 2022 Pages: 6111 - 6124

    

32. Connecting part geometry and cost for metal powder bed fusion

    • Hannah D. Budinoff
    • Mohammed Shafae

    ORIGINAL ARTICLE 23 July 2022 Pages: 6125 - 6136

    

33. Analysis of the influence of welding parameters on defects and welding characteristics of aluminum-magnesium alloy 5052-H34 in the FSW process

    • Marcos Vinícius de Oliveira Martins
    • Jose Luis Lopes Silveira
    • José Roberto Moraes D’Almeida

    ORIGINAL ARTICLE 20 July 2022 Pages: 6137 - 6151

    

34. Influence of machining parameters and deep rolling on the fatigue life of AISI 4140 steel

    • Augusto M. Martins
    • Paulo C. M. Rodrigues
    • Alexandre M. Abrão

    ORIGINAL ARTICLE 20 July 2022 Pages: 6153 - 6167

    

35. Deep Reinforcement Learning for autonomous pre-failure tool life improvement

    • Hussein A. Taha
    • Soumaya Yacout
    • Yasser Shaban

    ORIGINAL ARTICLE 29 July 2022 Pages: 6169 - 6192

    

36. Enhanced wear resistance and wettability of 20Cr2Ni4A steel by supersonic fine particle bombardment treatment

    • Lei Shi
    • Jinna Liu
    • Haoliang Tian

    ORIGINAL ARTICLE 22 July 2022 Pages: 6193 - 6204

    

37. Research on the mapping grinding of dimple surface with ordered pattern based on topological theory

    • Lyu Yushan
    • Wang Guoxun
    • Qi Yongchao

    ORIGINAL ARTICLE 20 July 2022 Pages: 6205 - 6223

    

38. Green machining of aluminum pipes: an integrated approach for eco-efficiency and life cycle assessment in manufacturing systems

    • Alessandro Silveira Firmino
    • Erica Kushihara Akim
    • Diogo Aparecido Lopes Silva

    ORIGINAL ARTICLE 26 July 2022 Pages: 6225 - 6241

    

39. Steel-aluminum plastic clinching of an inclined wall die

    • Menghan Wang
    • Yifeng Chen
    • Menglong Du

    ORIGINAL ARTICLE 26 July 2022 Pages: 6243 - 6253

    

40. Optimization of the process parameters for micro-milling thin-walled micro-parts using advanced algorithms

    • Peng Wang
    • Qingshun Bai
    • Hui Ding

    ORIGINAL ARTICLE 28 July 2022 Pages: 6255 - 6269

    

41. Numerical simulation and experimental study on non-axisymmetric spinning with a groove at the middle of the tube

    • Zhen Jia
    • XuanWang
    • Baoming Liu

    ORIGINAL ARTICLE 21 July 2022 Pages: 6271 - 6284

    

42. Variation characteristics of machinability in drilling of SiC particle reinforced aluminum matrix (SiCp/Al) composite with a wide range of particle volume fractions

    • Chang Liu
    • Cheng Li
    • Lei Gao

    ORIGINAL ARTICLE 22 July 2022 Pages: 6285 - 6302

    

43. Interfacial evolution and mechanical behavior of explosively welded titanium/steel joint under subsequent heat treatment process

    • Tong Wu
    • Chunli Yang

    ORIGINAL ARTICLE 23 July 2022 Pages: 6303 - 6314

    

44. Effect of blank holder force on joining quality of the flat clinch-rivet process

    • Chao Chen
    • Xingang Zhang
    • Yuxin Yin

    ORIGINAL ARTICLE 29 July 2022 Pages: 6315 - 6323

    

45. Research and development of parametric design platform for series complex cutting tools

    • Zhi Lin
    • Caixu Yue
    • Daxun Yue

    ORIGINAL ARTICLE 21 July 2022 Pages: 6325 - 6340

    

46. Investigation on the equipment and tool influencing factors on machining performance of endless diamond wire sawing

    • Jian Qiu
    • Zhaorui Wang
    • Shuai Zhang

    ORIGINAL ARTICLE 21 July 2022 Pages: 6341 - 6359

    

47. Prediction of double-sided arc welding deformation based on dynamic heat distribution model and TEP-FE approach

    • Hanling Wu
    • Yingjie Guo
    • Yinglin Ke

    ORIGINAL ARTICLE 22 July 2022 Pages: 6361 - 6374

    

48. Modeling and analysis of residual stresses of camshaft induced by swing grinding processes

    • Xiaoxiang Bai
    • Jianzhi Chen
    • Bofeng Fu

    ORIGINAL ARTICLE 22 July 2022 Pages: 6375 - 6391

    

49. Tribological behavior of PTFE/Nomex/phenolic composite lubricant under cold forming condition in the bearing assembly process

    • Chengliang Hu
    • Yue Zhuo
    • Hongyu Liu

    ORIGINAL ARTICLE 22 July 2022 Pages: 6393 - 6406

    

50. Compensate for longitudinally discrepant springback and bow in chain-die forming processes by multiple sections optimization

    • Zhenye Liang
    • Tianxia Zou
    • Yinghong Peng

    ORIGINAL ARTICLE 27 July 2022 Pages: 6407 - 6430