1. Application of machine vision for tool condition monitoring and tool performance optimization–a review

   • Tiyamike Banda
   • Ali Akhavan Farid
   • Chin Seong Lim

   Critical Review 01 August 2022 Pages: 7057 - 7086

   

2. Advancements in accuracy decline mechanisms and accuracy retention approaches of CNC machine tools: a review

   • Wenjun Liu
   • Song Zhang
   • Yingli Sun

   Critical Review 06 August 2022 Pages: 7087 - 7115

   

3. Process parameters optimization in plastic injection molding using metamodel-based optimization: a comprehensive review

   • Satoshi Kitayama

   Critical Review 06 August 2022 Pages: 7117 - 7145

   

4. Experimental verification of mechanistic force models for endmilling: the impact of the size effect on cutting coefficients

   • Scott W. T. Payne
   • Palash Roy Choudhury
   • Abhijit Bhattacharyya

   ORIGINAL ARTICLE 14 July 2022 Pages: 7147 - 7165

   

5. Correction to: Experimental verification of mechanistic force models for endmilling: the impact of the size effect on cutting coefficients

   • Scott W. T. Payne
   • Palash Roy Choudhury
   • Abhijit Bhattacharyya

   Correction 20 July 2022 Pages: 7167 - 7167

6. Effective mechanical properties of additive manufactured triply periodic minimal surfaces: experimental and finite element study

   • Nikolaos Kladovasilakis
   • Konstantinos Tsongas
   • Dimitrios Tzetzis

   ORIGINAL ARTICLE 15 July 2022 Pages: 7169 - 7189

   

7. Correction to: Effective mechanical properties of additive manufactured triply periodic minimal surfaces: experimental and finite element study

   • Nikolaos Kladovasilakis
   • Konstantinos Tsongas
   • Dimitrios Tzetzis

   Correction 25 July 2022 Pages: 7191 - 7193

   

8. Simulation of abrasive polishing process of single crystal silicon based on molecular dynamics

   • Xiaosong Meng
   • Haixia Yue
   • Houfu Dai

   ORIGINAL ARTICLE 21 July 2022 Pages: 7195 - 7211

   

9. Correction to: Simulation of abrasive polishing process of single crystal silicon based on molecular dynamics

   • Xiaosong Meng
   • Haixia Yue
   • Houfu Dai

   Correction 29 July 2022 Pages: 7213 - 7213

10. Thermal error modeling of electric spindle based on particle swarm optimization-SVM neural network

    • Zhaolong Li
    • Wenming Zhu
    • Qinghai Wang

    ORIGINAL ARTICLE 23 July 2022 Pages: 7215 - 7227

    

11. Investigation modes for production technology of wire from the Pd5Ni alloy for catchment gauzes of the chemical industry

    • Igor L. Konstantinov
    • Sergey B. Sidelnikov
    • Vladimir I. Ber

    ORIGINAL ARTICLE 25 July 2022 Pages: 7229 - 7246

    

12. Computational study on the clamping mechanism in the injection molding machine

    • Van-Duong Le
    • Van-Thanh Hoang
    • Jang Min Park

    ORIGINAL ARTICLE 26 July 2022 Pages: 7247 - 7261

    

13. An investigation on a new sliding cutting strategy for carbon fiber–reinforced polymers

    • Qingxun Meng
    • Zheng Huang
    • Hui Zhang

    ORIGINAL ARTICLE 26 July 2022 Pages: 7263 - 7272

    

14. An innovative fuzzy-inference system for predicting the mechanical behavior of 3D printing thermoset carbon fiber composite materials

    • Nashat Nawafleh
    • Faris M. AL-Oqla

    ORIGINAL ARTICLE 26 July 2022 Pages: 7273 - 7286

    

15. Evaluating the effect of MQL technique in grinding VP50IM steel with green carbide wheel

    • Bruno Kenta Sato
    • José Claudio Lopes
    • Eduardo Carlos Bianchi

    ORIGINAL ARTICLE 26 July 2022 Pages: 7287 - 7294

    

16. Multi-view camera system for measurement of heavy forgings

    • Jakub Hurník
    • Aneta Zatočilová
    • Daniel Koutný

    ORIGINAL ARTICLE 27 July 2022 Pages: 7295 - 7310

    

17. Investigation of effect of conformal cooling inserts in high-pressure die casting of AlSi9Cu3

    • Can Karakoc
    • Kerem Can Dizdar
    • Derya Dispinar

    ORIGINAL ARTICLE 28 July 2022 Pages: 7311 - 7323

    

18. Application of the fuzzy-based Taguchi method for servo stamping curve

    • Kuo-Wang Liu
    • Chun-Chih Kuo

    ORIGINAL ARTICLE 28 July 2022 Pages: 7325 - 7339

    

19. Thermomechanical analysis of friction stir welding using a new velocity-based model for tool-workpiece interaction

    • Zhen Sun
    • Pengfei Liu
    • Xinghua Yu

    ORIGINAL ARTICLE 28 July 2022 Pages: 7341 - 7357

    

20. Investigations on metallurgical parameters in hypoeutectic Al–Si alloys under upward directional solidifications

    • Alexandre Furtado Ferreira
    • Lucas Jardim de Moura
    • Roberto Carlos Sales

    ORIGINAL ARTICLE 29 July 2022 Pages: 7359 - 7382

    

21. Analysing the effects of layer heights and line widths on FFF-printed thermoplastics

    • Javaid Butt
    • Raghunath Bhaskar
    • Vahaj Mohaghegh

    ORIGINAL ARTICLE 29 July 2022 Pages: 7383 - 7411

    

22. Study on the mechanism of strengthening the bonding strength of Cu/Al composite strip by cross shear behaviour from vibration cast-rolling process

    • Lingxiao Li
    • Qiuyue Du
    • Chao Zhao

    ORIGINAL ARTICLE 29 July 2022 Pages: 7413 - 7426

    

23. The study of the roundness and cylindricity deviations of parts produced with the use of the additive manufacturing

    • Jacek Świderski
    • Włodzimierz Makieła
    • Uros Zuperl

    ORIGINAL ARTICLE Open access 29 July 2022 Pages: 7427 - 7437

    

24. Geometric error measurement of facing head and machining verification on large horizontal boring and milling machine tool

    • Yu-Ta Chen
    • Tang-Chao Liu
    • Chien-Sheng Liu

    ORIGINAL ARTICLE 30 July 2022 Pages: 7439 - 7449

    

25. Development of a deep learning machining feature recognition network for recognition of four pilot machining features

    • Naser Mohammadi
    • Mohammad Javad Nategh

    ORIGINAL ARTICLE 30 July 2022 Pages: 7451 - 7462

    

26. Dynamic characteristics analysis of two-beam laser welding robot for fuselage panels

    • Qingfei Zeng
    • Xuemei Liu
    • Aiping Li

    ORIGINAL ARTICLE 01 August 2022 Pages: 7463 - 7474

    

27. Technical, environmental, and economic feasibility investigation of an innovative dry washing process for metal degreasing

    • Gianluca Rubino
    • Marco Marconi
    • Erica Menna

    ORIGINAL ARTICLE Open access 01 August 2022 Pages: 7475 - 7492

    

28. Data envelopment analysis for algorithm efficiency assessment in metamodel-based simulation optimization

    • João Victor Soares do Amaral
    • Rafael de Carvalho Miranda
    • Aneirson Francisco da Silva

    ORIGINAL ARTICLE 01 August 2022 Pages: 7493 - 7507

    

29. Combining adaptive time-series feature window and stacked bidirectional LSTM for predicting tool remaining useful life without failure data

    • Weili Kong
    • Hai Li

    ORIGINAL ARTICLE 01 August 2022 Pages: 7509 - 7526

    

30. Mechanical properties and bio-tribological performance of PVD (Ta/ZrN)_n multilayer coatings on UHMWPE in bovine serum lubrication

    • Chems Eddine Ramoul
    • Corinne Nouveau
    • Kheireddine Bouzid

    ORIGINAL ARTICLE 01 August 2022 Pages: 7527 - 7538

    

31. Bimetallic additively manufactured structure (BAMS) of Inconel 625 and austenitic stainless steel: effect of heat-treatment on microstructure and mechanical properties

    • You Sub Kim
    • Daeho Yun
    • Soo Yeol Lee

    ORIGINAL ARTICLE 01 August 2022 Pages: 7539 - 7549

    

32. Experimental and optimization studies of ultrasonic-assisted friction stir weldments of AA2014-T651 using graph theory

    • Suvarna Raju Lam
    • Borigorla Venu

    ORIGINAL ARTICLE 01 August 2022 Pages: 7551 - 7568

    

33. The effect of temperature field on the characteristics of carbon fiber reinforced thermoplastic composites in the laying and shaping process

    • Fuhai Zhao
    • Zhiqiang Liu
    • Zhihao Ma

    ORIGINAL ARTICLE 01 August 2022 Pages: 7569 - 7589

    

34. Residual stress prediction in axial ultrasonic vibration–assisted milling in situ TiB₂/7050Al MMCs

    • Xiaofen Liu
    • Wenhu Wang
    • Chenwei Shan

    ORIGINAL ARTICLE 01 August 2022 Pages: 7591 - 7606

    

35. Effect of cold wire addition in tandem submerged arc welding on weld geometry and micro-hardness of heavy gauge X70 steel

    • Tailin Ren
    • Mohsen Mohammadijoo
    • Hani Henein

    ORIGINAL ARTICLE 02 August 2022 Pages: 7607 - 7625

    

36. An efficient system based on model segmentation for weld seam grinding robot

    • Jimin Ge
    • Zhaohui Deng
    • Jiaxu Nie

    ORIGINAL ARTICLE 02 August 2022 Pages: 7627 - 7641

    

37. Decision support system to select a 3D printing process/machine and material from a large-scale options pool

    • Khalil Mustafa Abdulkarem Algunaid
    • Jichang Liu

    ORIGINAL ARTICLE 02 August 2022 Pages: 7643 - 7659

    

38. The role of pin eccentricity in friction stir welding of Al-Mg-Si alloy sheets: microstructural evolution and mechanical properties

    • Wentao Hou
    • Yuquan Ding
    • Adrian Gerlich

    ORIGINAL ARTICLE 02 August 2022 Pages: 7661 - 7675

    

39. Spring-dashpot vibrational model for the investigation of viscoelasticity in gelatinous abrasive media and subsequent control of parameters for the blast polishing of Ti-6Al-4 V alloy

    • Quintin de Jongh
    • Ramesh Kuppuswamy
    • Matthew Titus

    ORIGINAL ARTICLE 02 August 2022 Pages: 7677 - 7695

    

40. Real-time 3D video-based MR remote collaboration using gesture cues and virtual replicas

    • Xiangyu Zhang
    • Xiaoliang Bai
    • Quan Yu

    ORIGINAL ARTICLE 02 August 2022 Pages: 7697 - 7719

    

41. On the kinematic-geometry of one-parameter Lorentzian spatial movement

    • Nadia Alluhaibi
    • Rashad A. Abdel-Baky

    ORIGINAL ARTICLE 03 August 2022 Pages: 7721 - 7731

    

42. The study of the improvement and mechanisms on ASS surface topography in pre-stress grinding considering SCC

    • Zhuangzhuang Hou
    • Shichao Xiu
    • Xiannan Zou

    ORIGINAL ARTICLE 03 August 2022 Pages: 7733 - 7748

    

43. TIG spot welding applied to NiTi shape memory wires optimized by factorial design

    • Luiz Fernando Alves Rodrigues
    • Fernando Andrade Amorim
    • Carlos José de Araújo

    ORIGINAL ARTICLE 03 August 2022 Pages: 7749 - 7762

    

44. WSdesign: a mathematical design method for generating uniform and functionally gradient/hybrid wave springs, fabricated using additive manufacturing processes

    • Muhammad Rizwan ul Haq
    • Aamer Nazir
    • Jeng-Ywan Jeng

    ORIGINAL ARTICLE 04 August 2022 Pages: 7763 - 7778

    

45. The influence of water-based nanolubrication on mill load and friction during hot rolling of 304 stainless steel

    • Hui Wu
    • Dongbin Wei
    • Zhengyi Jiang

    ORIGINAL ARTICLE Open access 04 August 2022 Pages: 7779 - 7792

    

46. Industry-oriented method for dynamic force identification in peripheral milling based on FSC-LSQR using acceleration signals

    • Maxiao Hou
    • Hongrui Cao
    • Jianghai Shi

    ORIGINAL ARTICLE 04 August 2022 Pages: 7793 - 7809

    

47. Minimizing the surface roughness in L-PBF additive manufacturing process using a combined feedforward plus feedback control system

    • Hossein Rezaeifar
    • Mohamed Elbestawi

    ORIGINAL ARTICLE 04 August 2022 Pages: 7811 - 7831

    

48. Drilling performance of short Washingtonia filifera fiber–reinforced epoxy biocomposites: RSM modeling

    • Isma Dembri
    • Ahmed Belaadi
    • Mostefa Bourchak

    ORIGINAL ARTICLE 04 August 2022 Pages: 7833 - 7850

    

49. Effects of processing parameters on the surface quality of wrought Ni-based superalloy by ultrasonic-assisted electrochemical grinding

    • Yucai Ma
    • Yingyue Yin
    • Jinxing Huo

    ORIGINAL ARTICLE 04 August 2022 Pages: 7851 - 7865

    

50. Dynamic modeling and nonlinear vibration analysis of spindle system during ball end milling process

    • Huihui Miao
    • Chenyu Wang
    • Mengtao Xu

    ORIGINAL ARTICLE 04 August 2022 Pages: 7867 - 7889