1. Fabrication and compressive strength of macrochannelled tetragonal zirconia polycrystals with calcium phosphate coating layer

   • Young-Hag Koh
   • Hae-Won Kim
   • John W. Halloran

   Rapid Communications 01 September 2003 Pages: 2009 - 2012

2. Evaluation of nanoscale inhomogeneity in as-quenched state of Cu–Hf–Ti alloys

   • J. Saida
   • T. Osuna
   • M. Onuma

   Rapid Communications 01 September 2003 Pages: 2013 - 2016

3. Bulk processing of high-performance nanocrystalline intermetallics

   • C. H. Shang
   • R. C. Cammarata
   • C. L. Chien

   Rapid Communications 01 September 2003 Pages: 2017 - 2020

4. Temperature dependence of positron annihilation in a Zr–Ti–Ni–Cu–Be bulk metallic glass

   • Daewoong Suh
   • Reinhold H. Dauskardt
   • Richard H. Howell

   Rapid Communications 01 September 2003 Pages: 2021 - 2024

5. Imaging of piezoelectric activity in laser-ablated c-axis-oriented LiNbO₃/ZnO thin film multilayer on glass using atomic force microscopy

   • Parmanand Sharma
   • K. Sreenivas
   • K. V. Rao

   Rapid Communications 01 September 2003 Pages: 2025 - 2028

6. Preparation of ZnO by a nearby vaporizing chemical vapor deposition method

   • Junichi Nishino
   • Yoshio Nosaka

   Rapid Communications 01 September 2003 Pages: 2029 - 2032

7. Synthesis of vapor-grown carbon fibers from camphor without catalyst and their characterization

   • Debabrata Pradhan
   • Maheshwar Sharon
   • Indrajit Mukhopadhyay

   Articles 01 September 2003 Pages: 2033 - 2038

8. Pressure-dependent flow behavior of Zr_41.2Ti_13.8Cu_12.5Ni₁₀Be_22.5 bulk metallic glass

   • Jun Lu
   • Guruswami Ravichandran

   Articles 01 September 2003 Pages: 2039 - 2049

9. Identification of Nd163 phase in melt-textured NdBa₂Cu₃O_7−δ bulk samples

   • Marcello Gombos
   • Vicente Gomis
   • Xavier Obradors

   Articles 01 September 2003 Pages: 2050 - 2054

10. Growth of thick Yba₂Cu₃O_7−δ films carrying a critical current of over 230 A/cm on single LaMnO₃-buffered ion-beam assisted deposition MgO substrates

    • M. Paranthaman
    • T. Aytug
    • T. G. Holesinger

    Articles 01 September 2003 Pages: 2055 - 2059

11. Behavior of intermetallics in liquid Sn–Zn–Ag solder alloys

    • Jenn Ming Song
    • Kwang Lung Lin

    Articles 01 September 2003 Pages: 2060 - 2067

12. Semi-inverse method for predicting stress–strain relationship from cone indentations

    • A. DiCarlo
    • H. T. Y. Yang
    • S. Chandrasekar

    Articles 01 September 2003 Pages: 2068 - 2078

13. Influence of structure and chemistry on piezoelectric properties of lead zirconate titanate in a microelectromechanical systems power generation application

    • L. M. R. Eakins
    • B. W. Olson
    • D. F. Bahr

    Articles 01 September 2003 Pages: 2079 - 2086

14. Linear strain hardening in elastoplastic indentation contact

    • M. Sakai
    • T. Akatsu
    • K. Matsuda

    Articles 01 September 2003 Pages: 2087 - 2096

15. Laser-controlled precipitation of gold nanoparticles in silicate glasses

    • Xiongwei Jiang
    • Jianrong Qiu
    • Congshan Zhu

    Articles 01 September 2003 Pages: 2097 - 2100

16. Synthesis of Ni-based bulk metallic glass matrix composites containing ductile brass phase by warm extrusion of gas atomized powders

    • M. H. Lee
    • D. H. Bae
    • D. J. Sordelet

    Articles 01 September 2003 Pages: 2101 - 2108

17. Effect of supersaturation of Cu on reaction and intermetallic compound formation between Sn–Cu solder and thin film metallization

    • J. S. Ha
    • T. S. Oh
    • K. N. Tu

    Articles 01 September 2003 Pages: 2109 - 2114

18. Fabrication of large-size Fe-based glassy cores with good soft magnetic properties by spark plasma sintering

    • Baolong Shen
    • Akihisa Inoue

    Articles 01 September 2003 Pages: 2115 - 2121

19. Effect of oxygen on the thermomechanical behavior of passivated Cu thin films

    • Jonathan B. Shu
    • Susan B. Clyburn
    • Shefford P. Baker

    Articles 01 September 2003 Pages: 2122 - 2134

20. Incongruent reduction of tungsten carbide by a zirconium-copper melt

    • Zbigniew Grzesik
    • Matthew B. Dickerson
    • Ken H. Sandhage

    Articles 01 September 2003 Pages: 2135 - 2140

21. Glass formation in a (Ti, Zr, Hf)–(Cu, Ni, Ag)–Al high-order alloy system by mechanical alloying

    • L. C. Zhang
    • Z. Q. Shen
    • J. Xu

    Articles 01 September 2003 Pages: 2141 - 2149

22. Determination of hardness from nanoscratch experiments: Corrections for interfacial shear stress and elastic recovery

    • Noureddine Tayebi
    • Thomas F. Conry
    • Andreas A. Polycarpou

    Articles 01 September 2003 Pages: 2150 - 2162

23. Influence of the electrokinetic behaviors of abrasive ceria particles and the deposited plasma-enhanced tetraethylorthosilicate and chemically vapor deposited Si₃N₄ films in an aqueous medium on chemical mechanical planarization for shallow trench isolation

    • Sang-Kyun Kim
    • Sangkyu Lee
    • Jea-Gun Park

    Articles 01 September 2003 Pages: 2163 - 2169

24. Viscous Poisson’s coefficient determined by discontinuous hot forging

    • Ruzhong Zuo
    • Emil Aulbach
    • Jürgen Rödel

    Articles 01 September 2003 Pages: 2170 - 2176

25. Microstructural evolution of low-dose separation by implanted oxygen materials implanted at 65 and 100 keV

    • Jun Sik Jeoung
    • Philip Anderson
    • Supapan Seraphin

    Articles 01 September 2003 Pages: 2177 - 2187

26. Effect of geometrical parameters on the field-emission properties of single-walled carbon nanotube ropes

    • Z. G. Zhao
    • Y. Tong
    • H. M. Cheng

    Articles 01 September 2003 Pages: 2188 - 2193

27. Interfacial and twin boundary structures of nanostructured Cu–Ag filamentary composites

    • K. H. Lee
    • S. I. Hong

    Articles 01 September 2003 Pages: 2194 - 2202

28. Electrodeposition of eutectic Sn–Zn alloy by pulse plating

    • Kwang-Lung Lin
    • Li-Min Sun

    Articles 01 September 2003 Pages: 2203 - 2207

29. Formation, properties, thermal characteristics, and crystallization of hard magnetic Pr–Al–Fe–Cu bulk metallic glasses

    • Zheng Li
    • Hai Yang
    • Wei Hua Wang

    Articles 01 September 2003 Pages: 2208 - 2213

30. Electromagnetic properties of photonic crystals with diamond structure containing defects

    • Shingo Kanehira
    • Soshu Kirihara
    • Mitsuo Wada Takeda

    Articles 01 September 2003 Pages: 2214 - 2220

31. Effect of internal stress on elemental diffusion and crystallization of electroless Ni–Cu–P deposit on Al

    • Jen-Che Hsu
    • Kwang-Lung Lin

    Articles 01 September 2003 Pages: 2221 - 2227

32. Microcolumn development on titanium by multipulse laser irradiation in nitrogen

    • E. György
    • A. Pérez del Pino
    • J. L. Morenza

    Articles 01 September 2003 Pages: 2228 - 2234

33. Addition of TiO₂ on the electrical properties of buried resistors in low-temperature cofired ceramics

    • Ching-Tai Cheng
    • Jiang-Tsair Lin
    • Ying-Chang Hung

    Articles 01 September 2003 Pages: 2235 - 2242

34. Novel silver/mica multilayer compressive seals for solid-oxide fuel cells: The effect of thermal cycling and material degradation on leak behavior

    • Yeong-Shyung Chou
    • Jeffry W. Stevenson

    Articles 01 September 2003 Pages: 2243 - 2250

35. Nanoindentation measurements on Cu–Sn and Ag–Sn intermetallics formed in Pb-free solder joints

    • R. R. Chromik
    • R. P. Vinci
    • M. R. Notis

    Articles 01 September 2003 Pages: 2251 - 2261

36. Mechanical and wear properties of Si₃N₄–W composites using tungsten boride powder

    • Hideki Hyuga
    • Mark I. Jones
    • Yukihiko Yamauchi

    Articles 01 September 2003 Pages: 2262 - 2267

37. Quantitative study of water transport during the hydrolysis of polymer coatings exposed to water vapor

    • Sanboh Lee
    • Tinh Nguyen
    • Jon Martin

    Articles 01 September 2003 Pages: 2268 - 2275