Articles

1. Improving mechanical properties and high-temperature oxidation of press hardened steel by adding Cr and Si

   • Rong Zhu
   • Yonggang Yang
   • Zhenli Mi

   Research Article 20 May 2024

2. Effect of deformation parameters on the austenite dynamic recrystallization behavior of a eutectoid pearlite rail steel

   • Haibo Feng
   • Shaohua Li
   • Xinping Mao

   Research Article 27 April 2024

3. Design and tailoring of patterned ZnO nanostructures for perovskite light absorption modulation

   • Haonan Si
   • Xuan Zhao
   • Yue Zhang

   Research Article 27 April 2024

4. Critical precipitation behavior of MnTe inclusions in resulfurized steels during solidification

   • Xiangyu Xu
   • Lu Zhang
   • Xuemin Wang

   Research Article 25 April 2024

5. Customization of FeNi alloy nanosheet arrays inserted with biomass-derived carbon templates for boosted electromagnetic wave absorption

   • Xuanqi Yang
   • Honghan Wang
   • Junye Sheng

   Research Article 16 April 2024 Pages: 812 - 824

6. Solid Bi₂O₃-derived nanostructured metallic bismuth with high formate selectivity for the electrocatalytic reduction of CO₂

   • Xiaoyan Wang
   • Safeer Jan
   • Xianbo Jin

   Research Article 16 April 2024 Pages: 803 - 811

7. Neutral and metallic vs. charged and semiconducting surface layer in acceptor doped CeO₂

   • Ilan Riess

   Research Article 16 April 2024 Pages: 795 - 802

8. Enhancing performance of low-temperature processed CsPbI₂Br all-inorganic perovskite solar cells using polyethylene oxide-modified TiO₂

   • Xu Zhao
   • Naitao Gao
   • Sujuan Wu

   Research Article 16 April 2024 Pages: 786 - 794

9. Machine learning-assisted efficient design of Cu-based shape memory alloy with specific phase transition temperature

   • Mengwei Wu
   • Wei Yong
   • Ruiping Liu

   Research Article 16 April 2024 Pages: 773 - 785

10. Porous TiFe₂ intermetallic compound fabricated via elemental powder reactive synthesis

    • Qian Zhao
    • Zhenli He
    • Yao Jiang

    Research Article 16 April 2024 Pages: 764 - 772

11. Comparison of electrochemical behaviors of Ti-5Al-2Sn-4Zr-4Mo-2Cr-1Fe and Ti-6Al-4V titanium alloys in NaNO₃ solution

    • Jia Liu
    • Shuanglu Duan
    • Ningsong Qu

    Research Article 16 April 2024 Pages: 750 - 763

12. Preheating-assisted solid-state friction stir repair of Al-Mg-Si alloy plate at different rotational speeds

    • Hui Wang
    • Yidi Li
    • Yunping Li

    Research Article 16 April 2024 Pages: 725 - 736

13. Mechanism of microarc oxidation on AZ91D Mg alloy induced by β-Mg₁₇Al₁₂ phase

    • Dajun Zhai
    • Xiaoping Li
    • Jun Shen

    Research Article 16 April 2024 Pages: 712 - 724

14. Microstructures, corrosion behavior and mechanical properties of as-cast Mg-6Zn-2X(Fe/Cu/Ni) alloys for plugging tool applications

    • Baosheng Liu
    • Jiali Wei
    • Guorui Ma

    Research Article 16 April 2024 Pages: 697 - 711

15. Selective leaching of lithium from spent lithium-ion batteries using sulfuric acid and oxalic acid

    • Haijun Yu
    • Dongxing Wang
    • Zhiqiang Liu

    Research Article 16 April 2024 Pages: 688 - 696

16. Effects of conductive agent type on lithium extraction from salt lake brine with LiFePO₄ electrodes

    • Zhen Zhang
    • Pan Luo
    • Xing Li

    Research Article 16 April 2024 Pages: 678 - 687

17. Insights into the changes in the surface properties of goethite with Ni in the lattice in the presence of salicylhydroxamic acid: Experimental and density functional theory studies

    • Levie Mweene
    • Gilsang Hong
    • Hyunjung Kim

    Research Article 16 April 2024 Pages: 665 - 677

18. Reinforcing effects of polypropylene on energy absorption and fracturing of cement-based tailings backfill under impact loading

    • Jiajian Li
    • Shuai Cao
    • Erol Yilmaz

    Research Article 16 April 2024 Pages: 650 - 664

19. Extraction and recycling technologies of cobalt from primary and secondary resources: A comprehensive review

    • Yukun Huang
    • Pengxu Chen
    • Xiaofeng Zhu

    Invited Review 16 April 2024 Pages: 628 - 649

20. Mechanical behavior and response mechanism of porous metal structures manufactured by laser powder bed fusion under compressive loading

    • Xuanming Cai
    • Yang Hou
    • Wenshu Yang

    Research Article 22 March 2024 Pages: 737 - 749

21. Disturbance failure mechanism of highly stressed rock in deep excavation: Current status and prospects

    • Tao Wang
    • Weiwei Ye
    • Xianhui Feng

    Invited Review 21 March 2024 Pages: 611 - 627

22. Facile synthesis of composite polyferric magnesium–silicate–sulfate coagulant with enhanced performance in water and wastewater

    • Xiangtao Huo
    • Rongxia Chai
    • Min Guo

    Research Article 14 March 2024 Pages: 574 - 584

23. Review on the plastic instability of medium-Mn steels for identifying the formation mechanisms of Lüders and Portevin–Le Chatelier bands

    • Bin Hu
    • Han Sui
    • Haiwen Luo

    Invited Review 08 March 2024

24. Establishment of NaLuF₄:15%Tb-based low dose X-PDT agent and its application on efficient antitumor therapy

    • Yi Tian
    • Zhiguang Fu
    • Mei Shi

    Research Article 04 April 2024 Pages: 599 - 610

25. A functionalized activated carbon adsorbent prepared from waste amidoxime resin by modifying with H₃PO₄ and ZnCl₂ and its excellent Cr(VI) adsorption

    • Chunlin He
    • Yun Liu
    • Wenchao Yang

    Research Article 04 April 2024 Pages: 585 - 598

26. Exploring the potential of olivine-containing copper–nickel slag for carbon dioxide mineralization in cementitious materials

    • Qianqian Wang
    • Zequn Yao
    • Xiaodong Shen

    Research Article 04 April 2024 Pages: 562 - 573

27. Constructing Al@C–Sn pellet anode without passivation layer for lithium-ion battery

    • Kangzhe Cao
    • Sitian Wang
    • Huiqiao Liu

    Research Article 04 April 2024 Pages: 552 - 561

28. Microstructure and mechanical properties stability of pre-hardening treatment in Al–Cu alloys for pre-hardening forming process

    • Liping Tang
    • Pengfei Wei
    • Qiu Pang

    Research Article 04 April 2024 Pages: 539 - 551

29. Enhanced recovery of high-purity Fe powder from iron-rich electrolytic manganese residue by slurry electrolysis

    • Wenxing Cao
    • Jiancheng Shu
    • Yong Yang

    Research Article 04 April 2024 Pages: 531 - 538

30. Recovery of Li, Ni, Co and Mn from spent lithium-ion batteries assisted by organic acids: Process optimization and leaching mechanism

    • Liuyi Ren
    • Bo Liu
    • Bo Chen

    Research Article 04 April 2024 Pages: 518 - 530

31. Prediction of lime utilization ratio of dephosphorization in BOF steelmaking based on online sequential extreme learning machine with forgetting mechanism

    • Runhao Zhang
    • Jian Yang
    • Wenkui Yang

    Research Article 04 April 2024 Pages: 508 - 517

32. High-chromium vanadium–titanium magnetite all-pellet integrated burden optimization and softening–melting behavior based on flux pellets

    • Bojian Chen
    • Tao Jiang
    • Peng Hu

    Research Article 04 April 2024 Pages: 498 - 507

33. Diffusion and reaction mechanism of limestone and quartz in fluxed iron ore pellet roasting process

    • Yufeng Guo
    • Jinlai Zhang
    • Lingzhi Yang

    Research Article 04 April 2024 Pages: 485 - 497

34. New process for treating boron-bearing iron ore by flash reduction coupled with magnetic separation

    • Qipeng Bao
    • Lei Guo
    • Zhancheng Guo

    Research Article 04 April 2024 Pages: 473 - 484

35. Flotation separation of scheelite from calcite using luteolin as a novel depressant

    • Xiaokang Li
    • Ying Zhang
    • Zhenhao Guan

    Research Article 04 April 2024 Pages: 462 - 472

36. Role of tannin pretreatment in flotation separation of magnesite and dolomite

    • Xiufeng Gong
    • Jin Yao
    • Yafeng Fu

    Research Article 04 April 2024 Pages: 452 - 461

37. Effects of the initiation position on the damage and fracture characteristics of linear-charge blasting in rock

    • Chenxi Ding
    • Renshu Yang
    • Liyun Yang

    Research Article 04 April 2024 Pages: 443 - 451

38. Integrated high-performance and accurate shaping technology of low-cost powder metallurgy titanium alloys: A comprehensive review

    • Xuemeng Gan
    • Shaofu Li
    • Yafeng Yang

    Invited Review 04 April 2024 Pages: 413 - 426

39. Lattice Boltzmann simulation study of anode degradation in solid oxide fuel cells during the initial aging process

    • Shixue Liu
    • Zhijing Liu
    • Hao Wu

    Research Article 17 February 2024 Pages: 405 - 411

40. Structural and magnetic properties of micropolycrystalline cobalt thin films fabricated by direct current magnetron sputtering

    • Kerui Song
    • Zhou Li
    • Qian Lei

    Research Article 17 February 2024 Pages: 384 - 394

41. Effect of Ni content on the wear behavior of Al-Si-Cu-Mg-Ni/SiC particles composites

    • Yanyu Liu
    • Lina Jia
    • Hu Zhang

    Research Article 17 February 2024 Pages: 374 - 383

42. Effect of solidification cooling rate on microstructure and tribology characteristics of Zn-4Si alloy

    • F. Akbari
    • M. Golkaram
    • I. Ansarian

    Research Article 17 February 2024 Pages: 362 - 373

43. Effect of Ti and Ta content on the oxidation resistance of Co-Ni-based superalloys

    • Yuheng Zhang
    • Zixin Li
    • Jianxin Xie

    Research Article 17 February 2024 Pages: 351 - 361

44. Prediction model for corrosion rate of low-alloy steels under atmospheric conditions using machine learning algorithms

    • Jingou Kuang
    • Zhilin Long

    Research Article 17 February 2024 Pages: 337 - 350

45. Flow characteristics and hot workability of a typical low-alloy high-strength steel during multi-pass deformation

    • Mingjie Zhao
    • Lihong Jiang
    • Zhenghua Guo

    Research Article 17 February 2024 Pages: 323 - 336

46. Preferentially selective extraction of lithium from spent LiCoO₂ cathodes by medium-temperature carbon reduction roasting

    • Daixiang Wei
    • Wei Wang
    • Chaofan Wu

    Research Article 17 February 2024 Pages: 315 - 322

47. Numerical investigation of sinusoidal pulsating gas intake to intensify the gas-slag momentum transfer in the top-blown smelting furnace

    • Zhanghao Wan
    • Shiliang Yang
    • Hua Wang

    Research Article 17 February 2024 Pages: 301 - 314

48. Effects of iron oxide on crystallization behavior and spatial distribution of spinel in stainless steel slag

    • Zihang Yan
    • Qing Zhao
    • Maofa Jiang

    Research Article 17 February 2024 Pages: 292 - 300

49. Effect of titanium on the sticking of pellets based on hydrogen metallurgy shaft furnace: Behavior analysis and mechanism evolution

    • Jinge Feng
    • Jue Tang
    • Xiao’ai Wang

    Research Article 17 February 2024 Pages: 282 - 291

50. Cross-upgrading of biomass hydrothermal carbonization and pyrolysis for high quality blast furnace injection fuel production: Physicochemical characteristics and gasification kinetics analysis

    • Han Dang
    • Runsheng Xu
    • Jinhua Li

    Research Article 17 February 2024 Pages: 268 - 281