Online first articles
Articles not assigned to an issue 102 articles
-
-
Effect of Solution and Double-Stage Aging Treatment on the Microstructure and Mechanical Properties of CMT-WAAM Inconel625 Structural Components
Authors (first, second and last of 6)
- Tianqi Wang
- Jinbao Tang
- Hongsheng Han
- Content type: OriginalPaper
- Published: 11 May 2024
-
Study of the Influence of Random Fields on Phase Transitions Using the Example of the Exactly Solvable Model
Authors
- V. N. Borodikhin
- V. V. Prudnikov
- Content type: ReviewPaper
- Published: 11 May 2024
-
Intrinsic Wetting of TC4 by Ag, AgCu and AgCuTi Alloys
Authors (first, second and last of 4)
- Kaibin Xie
- Ran Sui
- Qiaoli Lin
- Content type: OriginalPaper
- Published: 11 May 2024
-
Effect of Shear Angle on Microstructure and Mechanical Properties of AZ61 Mg Alloy During Extrusion-Shear Process
Authors (first, second and last of 7)
- Chaowei Zeng
- Wei Peng
- Hongjun Hu
- Content type: OriginalPaper
- Published: 11 May 2024
-
Understanding the Mechanisms of Texture Evolution of a Fe-24Cr-22Ni-7Mo Super Austenitic Stainless Steel During cold Rolling and Annealing
Authors (first, second and last of 5)
- Luhai Liao
- Shang Dai
- Fengguang Li
- Content type: OriginalPaper
- Published: 09 May 2024
-
Development of Particle and Grain Uniformity in High-Ductility Al–Zn–Mg Alloys with the Addition of Mg and Cu
Authors
- K. M. Choi
- S. J. Lee
- D. H. Bae
- Content type: OriginalPaper
- Published: 08 May 2024
-
Microstructure Evolution and Mechanical Properties at Ambient and Elevated Temperatures of in-situ TiB2/2219Al Matrix Composites During Cold Rolling
Authors (first, second and last of 10)
- Linwei Li
- Donghu Zhou
- Tongmin Wang
- Content type: OriginalPaper
- Published: 07 May 2024
-
Effect of Multidirectional Forging on the Microstructures and Mechanical Properties of the Al–Mg–Si Alloy
Authors (first, second and last of 6)
- Juncheng Mao
- Youping Yi
- Jiaguo Tang
- Content type: OriginalPaper
- Published: 06 May 2024
-
Effect of Welding Conditions on Weld Zone Temperature and Mechanical Properties of Friction Stir Welded AZ61 Magnesium Alloy Sheet
Authors (first, second and last of 8)
- Woo Geun Lee
- Yohan Go
- Young Min Kim
- Content type: OriginalPaper
- Published: 06 May 2024
-
A Study on the Microstructural Evolution, Interfacial Diffusion and Mechanical Properties of Ultra-thin Stainless Steel–Copper Composites Fabricated by Roll Bonding
Authors (first, second and last of 6)
- Yanyang Qi
- Xiaoguang Ma
- Jingwei Zhao
- Content type: OriginalPaper
- Published: 04 May 2024
-
Evaluation of Sensitization Behaviors on the Heat-Affected Zone of Austenitic Stainless Steel Weld by Thermal Cycles of Actual Multi-pass Welding
Authors (first, second and last of 6)
- Gidong Kim
- Junho Lee
- Sang-Woo Song
- Content type: OriginalPaper
- Open Access
- Published: 03 May 2024
-
Recent Advances in Joining of Zirconium and Zirconium Alloy for Nuclear Industry
Authors (first, second and last of 8)
- Nan Jiang
- Hong Bian
- Weimin Long
- Content type: ReviewPaper
- Published: 03 May 2024
-
Investigation of Temperature Dependency of Tensile and Fatigue Behavior of Manganese-Molybdenum-Nickel ASTM A302 Grade C Alloy
Authors
- Thanh Tuan Nguyen
- Jaeyeong Park
- Un Bong Baek
- Content type: OriginalPaper
- Published: 03 May 2024
-
Morphological Characteristics of Precipitated Phases in Laser Cladding (Nano WC + Micron TiC)/Ti6Al4V Coatings with Different Composite Ceramic Contents
Authors (first, second and last of 6)
- Huizi Shi
- Zhuanni Gao
- Xiaohong Zhan
- Content type: OriginalPaper
- Published: 03 May 2024
-
Microstructural and Mechanical Properties of Nickel-Based Superalloy Fabricated by Pulsed-Mode Arc-Based Additive Manufacturing Technology
Authors
- R. Madesh
- K. Gokul Kumar
- Content type: OriginalPaper
- Published: 29 April 2024
-
Enhancing the High Temperature Tensile Strength of Fe36Ni36Cr10Mo1Al17 Alloy by Substituting Al with Si
Authors (first, second and last of 8)
- Xiaoming Liu
- Jianbin Wang
- Jincheng Wang
- Content type: BriefCommunication
- Published: 27 April 2024
-
Influence of Variation Ambient System on Dissimilar Friction Stir Welding of Al Alloy to Mg Alloy by the Addition of Nanoparticles and Interlayer
Authors (first, second and last of 4)
- Amin Abdollahzadeh
- Behrouz Bagheri Vanani
- Hamid Reza Jafarian
- Content type: OriginalPaper
- Published: 27 April 2024
-
Orientation Dependent Quasi-isentropic Tensile Behaviors of Body-Centered Cubic Tungsten Through Molecular Dynamics
Authors (first, second and last of 5)
- Yanchun Leng
- Ziyi Li
- C. P. Liang
- Content type: OriginalPaper
- Published: 27 April 2024
-
Investigating the Impact of Friction Stir Processing on the Hydrogen Embrittlement in AA6082-T6 Heat-Treatable Aluminum Alloy
Authors (first, second and last of 4)
- Ioannis G. Papantoniou
- Panagiotis Karmiris-Obratański
- Dimitrios E. Manolakos
- Content type: OriginalPaper
- Open Access
- Published: 13 April 2024
-
Influence of Machine Stiffness on the Portevin–Le Chatelier Effect of Ti-12Mo Alloy Based on a Modified McCormick Constitutive Model
Authors (first, second and last of 5)
- Shiyuan Luo
- Liang Xiao
- Liangcai Zeng
- Content type: OriginalPaper
- Published: 13 April 2024
-
Thermal Stability of Nanocrystals in SLM-printed Ti64 Alloy Treated by Laser Shock Peening and Plasma Nitriding
Authors (first, second and last of 6)
- Jun Wang
- Bo He
- Yonghua Rong
- Content type: OriginalPaper
- Published: 13 April 2024
-
Experimental Study of Dissimilar Double Pulse Resistance Spot Welded Austenitic Stainless Steel and Weathering Steel
Authors (first, second and last of 5)
- Xiqing Li
- Wei Liu
- Peiwei Bao
- Content type: OriginalPaper
- Published: 04 April 2024
-
Microstructures and Mechanical Properties of Extruded Mg-Gd-Al Alloys: Influence of Initial Second-Phase Morphology Before Extrusion
Authors (first, second and last of 9)
- Chao Wang
- Zhening Yang
- Kwang Seon Shin
- Content type: OriginalPaper
- Published: 04 April 2024
-
Effect of Laser Beam Oscillation Process on the Interlaminar Region of Inconel 625 Alloy Thin-Walled Structure Fabricated by Oscillating Laser Additive Manufacturing
Authors (first, second and last of 6)
- Fuyuan Zhang
- Yi Luo
- Juan Liu
- Content type: ReviewPaper
- Published: 04 April 2024
-
Effects of Carbon Nanotubes and Nickel-Plated Carbon Nanotubes on the Microstructure and Mechanical Properties of AlCoCrFeNiCu High Entropy Alloy
Authors (first, second and last of 9)
- Jiahao Lv
- Jinghong Du
- Rongrong Zhang
- Content type: OriginalPaper
- Published: 04 April 2024
-
Microstructure, Texture, and Mechanical Properties of Thin Titanium Plates Jointed by Coaxial Laser-Plasma Hybrid Welding
Authors (first, second and last of 7)
- Detao Cai
- Ziyi Luo
- Yi Zhang
- Content type: OriginalPaper
- Published: 02 April 2024
-
Mathematical Simulation of Decarburization with CO2 Injection During RH Refining of Ultra-Low-Carbon Steel
Authors (first, second and last of 4)
- Gujun Chen
- Jiang Yang
- Shengping He
- Content type: OriginalPaper
- Published: 30 March 2024
-
Mechanism of Grain Refinement Induced by Mn Element in Wire Arc Addition Manufacturing Al-Mg Alloy
Authors (first, second and last of 6)
- Dun Miao
- Jingyu Zhao
- Feng Xue
- Content type: OriginalPaper
- Published: 30 March 2024
-
Elastic Modulus Prediction from Indentation Using Machine Learning: Considering Tip Geometric Imperfection
Authors (first, second and last of 8)
- Jong-hyoung Kim
- Dong-Yeob Kim
- Young-Cheon Kim
- Content type: OriginalPaper
- Published: 29 March 2024
-
Effect of Silicide and α2 Phase on the Creep Behavior of TC25G Alloy at High Temperature
Authors (first, second and last of 4)
- Zhuomeng Liu
- Shewei Xin
- Bohao Dang
- Content type: OriginalPaper
- Published: 29 March 2024
-
Effect of YSZ Particle Size and Content on Microstructure, Mechanical and Tribological Properties of (CoCrFeNiAl)1−x(YSZ)x High Entropy Alloy Composites
Authors (first, second and last of 6)
- M. Ghanbariha
- M. Farvizi
- H. S. Kim
- Content type: OriginalPaper
- Published: 29 March 2024
-
Effect of Rare Earth La on Microstructure, Hardness and Corrosion Resistance of A356 Aluminum Alloy
Authors (first, second and last of 5)
- Zijian Cheng
- Hong Yan
- Chuanliang Cao
- Content type: OriginalPaper
- Published: 29 March 2024
-
Study on Structural Variation of Sn–20% Pb Alloy Melt Subjected to Ultrasonic Vibration: An Electrical Characterization
Authors (first, second and last of 7)
- Zhaoyang Yin
- Qichi Le
- Tong Wang
- Content type: OriginalPaper
- Published: 29 March 2024
-
Synergetic Effect of Sc Micro-alloying and Low-Frequency Electromagnetic Casting in 7A36 Aluminum Alloy with Enhanced Mechanical and Corrosion Properties
Authors (first, second and last of 7)
- Lingfei Yang
- Fang Yu
- Xiangjie Wang
- Content type: OriginalPaper
- Published: 29 March 2024
-
Hot Deformation Behavior and Constitutive Equation of Cu–Cr–Zr Rods Prepared by Upward Continuous Casting
Authors (first, second and last of 5)
- Ying Zhang
- Xinbing Yun
- Hongwang Fu
- Content type: OriginalPaper
- Published: 23 March 2024
-
Hot Corrosion and Oxidation Behavior of Pt–Aluminide and Pt–Rh–Aluminide Coatings Applied on Nickle-Base and Cobalt-Base Substrates
Authors (first, second and last of 4)
- Atieh Koochaki-Abkenar
- Ahmad Malekan
- Kourosh Nematipour
- Content type: OriginalPaper
- Published: 23 March 2024
-
Cooperative Deformation Behavior and Microstructure Evolution of High-Strength Titanium-Clad Steel Plate During Thermal Compression
Authors (first, second and last of 6)
- Xuan Chen
- Han Xiao
- Kun Liu
- Content type: OriginalPaper
- Published: 23 March 2024
-
Selective Laser Melting of Stainless Steels: A review of Process, Microstructure and Properties
Authors (first, second and last of 5)
- A. Mansoura
- N. Omidi
- S. Dehghan
- Content type: ReviewPaper
- Published: 23 March 2024
-
Influence of Copper Additive on Structural and Magnetic Behavior of Ne80Fe20 Alloyed Powder
Authors
- Elham Ahmadi-Gheidari
- Hossein Raanaei
- Content type: OriginalPaper
- Published: 16 March 2024
-
Nanoindentation Creep Behavior of Hexagonal Close-Packed High-Entropy Alloys
Authors (first, second and last of 4)
- Z. Wang
- X. W. Yang
- J. W. Qiao
- Content type: OriginalPaper
- Published: 16 March 2024
-
Change in Failure Behavior and Fatigue Life of Single-Crystal Ni-Based Superalloys Under Thermomechanical Fatigue Loading
Authors (first, second and last of 5)
- Van Hung Dao
- Hee Soo Yun
- Seung Hoon Nahm
- Content type: OriginalPaper
- Published: 16 March 2024
-
Influence of Short-Term Aging Treatment on Precipitation Behavior of DD6 Single-Crystal Superalloy
Authors (first, second and last of 7)
- Xiaopeng Li
- Youshui Xie
- Hexin Zhang
- Content type: OriginalPaper
- Published: 13 March 2024
-
High Temperature Melt Viscosity Prediction Model Based on BP Neural Network
Authors (first, second and last of 4)
- Xiaoyue Fan
- Shanchao Gao
- Kexin Jiao
- Content type: OriginalPaper
- Published: 09 March 2024
-
Tensile Properties and Deformation Mechanisms of Ni–Co–W Based Superalloy with High γ′ Content
Authors (first, second and last of 6)
- Wenbin Tai
- Rui Zhang
- Xiaofeng Sun
- Content type: OriginalPaper
- Published: 09 March 2024
-
Mechanical Response, Twinning Behaviours and Strain Incompatibility of FSWed-AZ31B Joints Along Different Loading Paths
Authors (first, second and last of 4)
- Yongji Liu
- Lijuan Huang
- Zhonghao Heng
- Content type: OriginalPaper
- Published: 09 March 2024
-
Influence of Patterns on Mechanical Properties of Ultrasonically Welded Joints in Copper Substrate and Wire
Authors (first, second and last of 4)
- Zeshan Abbas
- Fan Teng
- Md Shafiqul Islam
- Content type: OriginalPaper
- Published: 09 March 2024
-
Analysis of Shear Characteristics of Quenchable Boron-Alloyed Steel 22MnB5 During the Hot Mechanical Piercing Process
Authors (first, second and last of 7)
- Kye Jeong Park
- Hye Jin Kim
- Joo Sik Hyun
- Content type: OriginalPaper
- Published: 09 March 2024
-
Texture Analyses and Mechanical Behavior of a High-Mn Steel Subjected to Different Pass Number of Simple Shear
Authors (first, second and last of 10)
- Marcos Natan da Silva Lima
- Samuel Filgueiras Rodrigues
- Hamilton Ferreira Gomes de Abreu
- Content type: OriginalPaper
- Published: 09 March 2024
-
Effects of Ultrasonic Surface Rolling Processing on the Surface Properties of 4Cr13 Stainless Steel
Authors (first, second and last of 7)
- Xiaoshuang Luo
- Dan Jia
- Haitao Duan
- Content type: OriginalPaper
- Published: 02 March 2024
For authors
Submit manuscriptWorking on a manuscript?
Avoid the most common mistakes and prepare your manuscript for journal editors.
Learn more