1. Using Finite Element Analysis Methods to Reduce the Failure of Building Structures

   • Daniel J. Thomas

   Editorial 02 June 2020 Pages: 615 - 616

   

2. Evaluation of Failure Factors of a Small-Scale Motor in Laboratory Testing

   • Roohollah Taherinezhad
   • Gholamreza Zarepour
   • Seyyed Sina Tabatabayee

   Lessons Learned 27 May 2020 Pages: 617 - 626

   

3. Solidification Cracking of Longitudinal Submerged Arc Welded Pipes

   • Rajesh K. Goyal
   • Ankit Singh
   • T. S. Kathayat

   Lessons Learned 28 May 2020 Pages: 627 - 633

   

4. Optimized Valve Stem Design in Oil and Gas Industry to Minimize Major Failures

   • Karan Sotoodeh

   Lessons Learned 02 June 2020 Pages: 634 - 640

   

5. Failure Analysis of Shipping Container Handler Twistlock Pin

   • M. V. Kral
   • A. L. Beardsley
   • N. J. Breeuwer

   Case History---Peer-Reviewed 14 May 2020 Pages: 641 - 646

   

6. Metallurgical Failure Analysis of a High-Strength-Steel Drag Chain Conveyor Link

   • Abdul Kareem Abdul Jawwad

   Case History---Peer-Reviewed 25 May 2020 Pages: 647 - 656

   

7. An Investigation on the Longitudinal Cracking of Electric Resistance Welded Steel Pipes

   • Mertcan Kaba
   • Mert Altay
   • Hüseyin Çimenoğlu

   Case History---Peer-Reviewed 23 May 2020 Pages: 657 - 662

   

8. Case Study: The Failure Analysis of Pipe ASTM A351 HK-40 in Reaction Plant Unit

   • F. Yushandiana
   • H. Setiana
   • E. Pujiyulianto

   Case History---Peer-Reviewed 27 May 2020 Pages: 663 - 670

   

9. Product News

   News 09 June 2020 Pages: 671 - 674

   

10. Industry Updates

    News 24 June 2020 Pages: 675 - 678

    

11. Professional Resources

    News 06 July 2020 Pages: 679 - 681

    

12. Training

    Calendar 29 May 2020 Pages: 682 - 685

13. Events

    • Vince Katona

    Calendar 29 May 2020 Pages: 686 - 688

14. Experimental Study of the Effects of Welding Depth and Heat Treatment on Residual Stresses in a Cracked Rotor

    • Amirali Amirian
    • Seyed Ebrahim Moussavi Torshizi
    • Mehran Moradi Mayen Bolagh

    Technical Article---Peer-Reviewed 22 April 2020 Pages: 689 - 700

    

15. Effect of Changing Heat Treatment Conditions on Microstructural and Mechanical Properties of Friction Stir Welded Sheets of AA2024 with Interlayer Strip Width AA7075

    • Mohamed Abu-Okail
    • Ibrahim Sabry
    • W. M. Shewakh

    Technical Article---Peer-Reviewed 07 May 2020 Pages: 701 - 722

    

16. Failure Analysis of a Steel Elbow Pipe from a Gas Well

    • María García-Martínez
    • Mª Pilar Valles González
    • Ana Pastor Muro

    Technical Article---Peer-Reviewed 12 May 2020 Pages: 723 - 733

    

17. Corrosion Inhibitive Property of Environmentally Benign Syzygium jambos Leaf Extract on Mild Steel in 1 M HCl

    • Supriya Bangera
    • Vijaya D. P. Alva

    Technical Article---Peer-Reviewed 09 May 2020 Pages: 734 - 743

    

18. Detailed Comparison of Methods for Classifying Bearing Failures Using Noisy Measurements

    • Juan Vargas-Machuca
    • Félix García
    • Alberto M. Coronado

    Technical Article---Peer-Reviewed 20 May 2020 Pages: 744 - 754

    

19. Failure Analysis of the Steerer Tube of a Bike

    • Francesco Durante

    Technical Article---Peer-Reviewed 14 May 2020 Pages: 755 - 767

    

20. Early Detection of Industrial-Scale Gear Tooth Surface Pitting Using Vibration Analysis

    • Elaheh Shafiei Sarvestani
    • Masoud Rezaeizadeh
    • Ali Bigani

    Technical Article---Peer-Reviewed 21 May 2020 Pages: 768 - 788

    

21. Characterization of Foreign Object Damage in a Power Plant Gas Turbine by Scanning Electron Microscopy Technique

    • Aliakbar Fallah Sheykhlari
    • Mastaneh Moattari
    • Saeed Khani Moghanaki

    Technical Article---Peer-Reviewed 19 May 2020 Pages: 789 - 793

    

22. A Fractographic Analysis of Additively Manufactured Ti6Al4V by Electron Beam Melting: Effects of Powder Reuse

    • R. Schur
    • S. Ghods
    • M. Ramulu

    Technical Article---Peer-Reviewed 20 May 2020 Pages: 794 - 803

    

23. Static and Dynamic Analysis of Automotive Leaf Spring: A Comparative Study of Various Materials Using ANSYS

    • Bevan Noronha
    • Sumith Yesudasan
    • Sibi Chacko

    Technical Article---Peer-Reviewed 22 May 2020 Pages: 804 - 818

    

24. Analysis of Failure of a Chassis Long Member Manufactured from E-46 Grade Hot-Rolled Steel Coil

    • P. P. Sarkar

    Technical Article---Peer-Reviewed 26 May 2020 Pages: 819 - 832

    

25. Microstructure and Corrosion Response of Spark-Plasma-Sintered 304 Austenitic Stainless Steel Reinforced with Titanium Nitride in Chloride Environments

    • Samuel Olukayode Akinwamide
    • Babatunde Abiodun Obadele
    • Peter Apata Olubambi

    Technical Article---Peer-Reviewed 25 May 2020 Pages: 833 - 842

    

26. Micro/Nanocrack Propagation and Fatigue Strength Analysis of Gun Barrel

    • Junpeng Ren
    • Deshi Wang

    Technical Article---Peer-Reviewed 25 May 2020 Pages: 843 - 852

    

27. Mode-I, Mode-II, and Mode-III Stress Intensity Factor Estimation of Regular- and Irregular-Shaped Surface Cracks in Circular Pipes

    • S. Suresh Kumar
    • V. Naren Balaji

    Technical Article---Peer-Reviewed 02 June 2020 Pages: 853 - 867

    

28. Buckling Failure Analysis of Defective Carbon Nanotubes Using Molecular Dynamics Simulation

    • Mohit Goel
    • S. P. Harsha
    • R. K. Mishra

    Technical Article---Peer-Reviewed 31 May 2020 Pages: 868 - 881

    

29. Failure Analysis of Gas Spray Atomization Crucible Materials

    • A. J. McWilliams
    • A. J. Duncan
    • A. A. Rodriguez-Vaquer

    Technical Article---Peer-Reviewed 30 May 2020 Pages: 882 - 887

    

30. Harm Analysis of Spring Defects in Circuit Breaker Mechanical Failure

    • Liang Huang
    • Xinru Mao
    • Hong Guo

    Technical Article---Peer-Reviewed 02 June 2020 Pages: 888 - 894

    

31. Retrofitting of Damage Rail Bridge Girder and Its Performance Evaluation

    • Anjani Kumar Shukla
    • P. R. Maiti
    • Gopal Rai

    Technical Article---Peer-Reviewed 12 June 2020 Pages: 895 - 911

    

32. Application of Local Hard Fillet Weld to Repair Damage Caused by Cavitation in Hydroelectric Power Plant

    • Gökhan Kahraman
    • Yahya Taşgin

    Technical Article---Peer-Reviewed 02 June 2020 Pages: 912 - 919

    

33. Dynamic Response Characteristics and Fatigue Life Prediction of Printed Circuit Boards for Random Vibration Environments

    • S. G. S. Karthiheyan
    • Virendra Kumar Verma
    • U. Gopinath

    Technical Article---Peer-Reviewed 06 June 2020 Pages: 920 - 929

    

34. Description of the Boundary Layer Behavior of an Aluminum–Carbon-Fiber-Reinforced Polymer Hybrid Compound Using a Cohesive Zone Model

    • Adrian Struß
    • Armin Schmid
    • Matthias Busse

    Technical Article---Peer-Reviewed Open access 03 June 2020 Pages: 930 - 935

    

35. Fatigue Lifetime Prediction for Oil Tube Material Based on ABAQUS and FE-SAFE

    • Xiaobo Liu
    • Yi Zhang
    • Shifeng Xue

    Technical Article---Peer-Reviewed 06 June 2020 Pages: 936 - 943

    

36. Numerical Simulation Method for Failure Pressure of Buried Dented Pipeline

    • Xiao Tian
    • Minxu Lu
    • Yingfeng Chen

    Technical Article---Peer-Reviewed 04 June 2020 Pages: 944 - 949

    

37. Study on Failure Behavior of Gas Well Tubing Under CO₂ Corrosion After Erosion

    • Wenhai Ma
    • Hang Qu
    • Zhiguo Wang

    Technical Article---Peer-Reviewed 05 June 2020 Pages: 950 - 957

    

38. A Method for Graphical Representation of Severe Resonance Regions

    • Rauf Tailony

    Technical Article---Peer-Reviewed 02 June 2020 Pages: 958 - 966

    

39. Metallurgical Failure Analysis and Improved Core Hardness to Enhance Crushing Strength, Wear Resistance and Fatigue Strength of Chain Bush

    • Krishnakumar Krishnasamy
    • Arockia Selvakumar Arockia Doss

    Technical Article---Peer-Reviewed 03 June 2020 Pages: 967 - 975

    

40. Effect of Tool Vibration on Flank Wear and Surface Roughness During High-Speed Machining of 1040 Steel

    • Samarjit Swain
    • Isham Panigrahi
    • Ramanuj Kumar

    Technical Article---Peer-Reviewed 06 June 2020 Pages: 976 - 994

    

41. Fatigue Life Prediction of Lap Welds in Axle Housings Using Notch Stress Modelling Approach and Design Modifications to Overcome the Failure

    • M. Prabhakar
    • Anil Kumar Prasad
    • Mani Kant Paswan

    Technical Article---Peer-Reviewed 10 June 2020 Pages: 995 - 1006

    

42. Research on the Integrity Evaluation Technology for Urban Gas Pipeline

    • Bin Ma
    • Xuqing Ma
    • Yan Li

    Technical Article---Peer-Reviewed 10 June 2020 Pages: 1007 - 1018

    

43. Diagnosis and Resolution of Vibration Issues in Vertical Centrifugal Pump

    • Potnuru Ganesh
    • S. Rama Krishna

    Technical Article---Peer-Reviewed 11 June 2020 Pages: 1019 - 1028

    

44. High-Strain Low-Cycle Fatigue Behavior of Thermomechanically Treated Rebar

    • Md Abu Bakkar
    • Bishal Kanrar
    • Debdulal Das

    Technical Article---Peer-Reviewed 16 June 2020 Pages: 1029 - 1037

    

45. Design Life Correlation of Axle Housings with Experimental Investigations and Failure Analysis to Overcome Manufacturing Process Influences by Surface Finish Improvements

    • M. Prabhakar
    • A. K. Prasad
    • M. K. Paswan

    Technical Article---Peer-Reviewed 11 June 2020 Pages: 1038 - 1054

    

46. Creep–Fatigue Interaction of P91 Steam Piping Subjected to Typical Start-up and Shutdown Cycles

    • Smith Salifu
    • Dawood Desai
    • Schalk Kok

    Technical Article---Peer-Reviewed 12 June 2020 Pages: 1055 - 1064