An atomistic study of solid/liquid interfaces and phase equilibrium in binary systems M. I. BaskesM. Stan OriginalPaper Pages: 435 - 439
A study of microsegregation in Al-Cu using a novel single-pan scanning calorimeter H. B. DongM. R. M. ShinH. Cama OriginalPaper Pages: 441 - 447
The effect of marangoni convection on fibrous monotectic growth L. Ratke OriginalPaper Pages: 449 - 457
Dendritic growth with fluid flow in pure materials Jun-Ho JeongJonathan A. DantzigNigel Goldenfeld OriginalPaper Pages: 459 - 466
Last-stage solidification of alloys: Theoretical model of dendrite-arm and grain coalescence M. RappazA. JacotW. J. Boettinger OriginalPaper Pages: 467 - 479
The morphological evolution of dendritic microstructures during coarsening R. MendozaJ. AlkemperP. W. Voorhees OriginalPaper Pages: 481 - 489
Structure and stability of a new ternary hexagonal phase in Al3 Ti-based Al-Ti-V alloys Woong-Seong ChangB. C. Muddle OriginalPaper Pages: 491 - 501
Observations and analysis of the influence of phase transformations on the instability of the thermally grown oxide in a thermal barrier system S. DarzensD. R. MummA. G. Evans OriginalPaper Pages: 511 - 522
Precipitation of aluminum in the silicon phase contained in W319 and 356 aluminum alloys William T. Donlon OriginalPaper Pages: 523 - 529
The evolution of annealing textures in 90 Pct drawn copper wire Hyun ParkDong Nyung Lee OriginalPaper Pages: 531 - 541
Resistance to shape refinement of precipitates in Al-(Si,Ge) alloys during thermal cycling V. RadmilovicA. J. TolleyD. Mitlin OriginalPaper Pages: 543 - 551
Hydride embrittlement and irradiation effects on the hoop mechanical properties of pressurized water reactor (PWR) and boiling-water reactor (BWR) ZIRCALOY cladding tubes: Part I. Hydride embrittlement in stress-relieved, annealed, and recrystallized ZIRCALOYs at 20 °C and 300 °C S. ArseneJ. B. BaiP. Bompard OriginalPaper Pages: 553 - 566
Hydride embrittlement and irradiation effects on the hoop mechanical properties of pressurized water reactor (PWR) and boiling-water reactor (BWR) ZIRCALOY cladding tubes: Part II. Morphology of hydrides investigated at different magnifications and their interaction with the processes of plastic deformation Miléna VelevaSylvie ArseneJinbo Bai OriginalPaper Pages: 567 - 578
Hydride embrittlement and irradiation effects on the hoop mechanical properties of pressurized water reactor (PWR) and boiling-water reactor (BWR) ZIRCALOY cladding tubes: Part III. Mechanical behavior of hydride in stress-relieved annealed and recrystallized ZIRCALOYs at 20 °C and 300 °C Sylvie ArseneJinbo BaiPhilipe Bompard OriginalPaper Pages: 579 - 588
The effect of the strain path on the work hardening of austenitic and ferritic stainless steels in axisymmetric drawing P. R. CetlinE. C. S. CorrêaM. T. P. Aguilar OriginalPaper Pages: 589 - 601
Mechanical properties of an ultrafine-grained Al-7.5 Pct Mg alloy B. O. HanF. A. MohamedE. J. Lavernia OriginalPaper Pages: 603 - 613
Postnecking elastoplastic characterization: Degree of approximation in the bridgman method and properties of the flow-stress/true-stress ratio G. La RosaA. RisitanoG. Mirone OriginalPaper Pages: 615 - 624
Work-softening behavior of the ultrafine-grained Al alloy processed by high-strain-rate, dissimilar-channel angular pressing Jae-Chul LeeJin-Yoo ShuJae Pyung Ahn OriginalPaper Pages: 625 - 632
Tensile properties and creep behavior of a new Ti-Al-Nb intermetallic alloy with an O+α 2 microstructure Feng TangMasuo Hagiwara OriginalPaper Pages: 633 - 643
Microstructural effects on moisture-induced embrittlement of isothermally forged TiAl-based intermetallic alloys T. TsuyumuY. KanenoT. Takasugi OriginalPaper Pages: 645 - 655
Evolution of strain-induced microstructure and texture in commercial aluminum sheet under balanced biaxial stretching S. W. BanovicT. Foecke OriginalPaper Pages: 657 - 671
Nanocrystalline Ni coatings strengthened with ultrafine particles Jianhong HeJulie M. Schoenung OriginalPaper Pages: 673 - 683
Multiple cracking of tantalum by hydrogenation Satoshi SemboshiNaoya MasahashiShuji Hanada OriginalPaper Pages: 685 - 690
Mechanisms of globularization of Ti-6Al-4V during static heat treatment N. StefanssonS. L. Semiatin OriginalPaper Pages: 691 - 698
Behavior of oxide film at the interface between particles in sintered Al powders by pulse electric-current sintering Guoqiang XieOsamu OhashiTetsuji Noda OriginalPaper Pages: 699 - 703
Focused ion beam milling: A practical method for preparing cast Al-Si alloy samples for transmission electron microscopy S. ShankarY. W. RiddleM. M. Makhlouf Communications Pages: 705 - 707
Mechanical milling-induced deformation twinning in Fcc materials with high stacking fault energy Jianhong HeKyung H. ChungYuntian T. Zhu Communications Pages: 707 - 712
Modeling of the atomic ordering processes in Fe3Al intermetallics by the monte carlo simulation method combined with electronic theory of alloys Amdulla O. MekhrabovM. Vedat Akdeniz OriginalPaper Pages: 721 - 734
On the influence of Si-Ge additions on the aging response of Al-Cu David MitlinV. RadmilovicJ. W. Morris Jr. OriginalPaper Pages: 735 - 742
On the precipitation-hardening behavior of the Al-Mg-Si-Cu alloy AA6111 S. EsmaeiliX. WangW. J. Poole OriginalPaper Pages: 751 - 763
A composite model for the grain-size dependence of yield stress of nanograined materials B. JiangG. J. Weng OriginalPaper Pages: 765 - 772
Antimony-induced embrittlement of [011] symmetric tilt boundaries in copper bicrystals R. MonzenT. KuzeH. Miura OriginalPaper Pages: 773 - 779
Static strain aging phenomena in cold-rolled dual-phase steels T. WaterschootB. C. De CoomanS. Vandeputte OriginalPaper Pages: 781 - 791
The thermal behavior of mechanically activated galena by thermogravimetry analysis Huiping HuQiyuan ChenLusheng Ye OriginalPaper Pages: 793 - 797
Superheat treatment of Al-7Si-0.55Mg melt and its influences on the solidification structures and the mechanical properties Wanqi JieZhongwei ChenK. Müller OriginalPaper Pages: 799 - 806
Iron intermetallic phases in the Al corner of the Al-Si-Fe system W. KhalifaF. H. SamuelJ. E. Gruzleski OriginalPaper Pages: 807 - 825
Aspects of orientation-dependent grain growth in extra-low carbon and interstitial-free steels during continuous annealing J. L. BocosE. NovilloI. Gutierrez OriginalPaper Pages: 827 - 839
Spark plasma sintering of Al-Si-Cu-Fe quasi-crystalline powder E. FleuryD. H. KimJ. S. Kim OriginalPaper Pages: 841 - 849
X-ray-based measurement of composition during electron beam melting of AISI 316 stainless steel: Part I. Experimental setup and processing of spectra M. RitchieS. L. CockcroftT. Wang OriginalPaper Pages: 851 - 861
X-ray-based measurement of composition during electron beam melting of AISI 316 stainless steel: Part II. Evaporative processes and simulation M. RitchieP. D. LeeT. Wang OriginalPaper Pages: 863 - 877
Phase transition in galvanneal coatings N. -Y. TangX. B. YuF. N. Coady Communications Pages: 879 - 881
Influence of coating on thermal response of composites reinforced with anisotropic fibers L. H. You Communications Pages: 883 - 887