1. Hydrogen storage in Ti–V-based body-centered-cubic phase alloys

   • Xuebin Yu
   • Zhu Wu
   • Naixin Xu

   Rapid Communications 01 November 2003 Pages: 2533 - 2536

2. Strength enhancement of single crystal laser components

   • K. E. Shafer
   • D. E. Eakins
   • K. G. Lynn

   Rapid Communications 01 November 2003 Pages: 2537 - 2539

3. Interface microstructures between Ni-P alloy plating and Sn–Ag–(Cu) lead-free solders

   • Chi-Won Hwang
   • Katsuaki Suganuma
   • Shigeo Hashimoto

   Rapid Communications 01 November 2003 Pages: 2540 - 2543

4. Electromigration failure in flip chip solder joints due to rapid dissolution of copper

   • Y. C. Hu
   • Y. H. Lin
   • K. N. Tu

   Rapid Communications 01 November 2003 Pages: 2544 - 2548

5. Polymer-derived SiCN composites with magnetic properties

   • Atanu Saha
   • Sandeep R. Shah
   • Stephen E. Russek

   Rapid Communications 01 November 2003 Pages: 2549 - 2551

6. Synthesis of carbon nitride nanocrystals on Co/Ni-covered substrate by nitrogen-atom-beam-assisted pulsed laser ablation

   • Ning Xu
   • Hao Lin
   • Fuming Li

   Rapid Communications 01 November 2003 Pages: 2552 - 2555

7. Composition and Growth-Temperature Effect on the Microstructure of Epitaxial La_1−x Sr_x MnO₃ (x = 0, 0.2) Thin Films on (001) LaAlO₃

   • J. C. Jiang
   • E. I. Meletis
   • K. I. Gnanasekar

   Articles 01 November 2003 Pages: 2556 - 2561

8. Growth and Ripening of (Au,Ni)Sn₄ Phase in Pb-Free and Pb-Containing Solders on Ni/Au Metallization

   • K. Y. Lee
   • M. Li
   • K. N. Tu

   Articles 01 November 2003 Pages: 2562 - 2570

9. Synthesis and characterization of new inorganic polymeric composites based on kaolin or white clay and on ground-granulated blast furnace slag

   • I. Lecomte
   • M. Liégeois
   • F. Maseri

   Articles 01 November 2003 Pages: 2571 - 2579

10. High-yield synthesis of carbon coils on tungsten substrates and their behavior in the presence of an electric field

    • Jun Jiao
    • Erik Einarsson
    • George M. Coia

    Articles 01 November 2003 Pages: 2580 - 2587

11. Fabrication of tapered, conical-shaped titania nanotubes

    • G. K. Mor
    • Oomman K. Varghese
    • Craig A. Grimes

    Articles 01 November 2003 Pages: 2588 - 2593

12. Effect of CeO₂ on the reaction kinetics for the formation of Sr_0.5Ba_0.5Ce_xNb₂O_6+δ

    • Jyh-Tzong Shiue
    • Tsang-Tse Fang

    Articles 01 November 2003 Pages: 2594 - 2599

13. Synthesis and dielectric properties of tungsten-based complex perovskites

    • D. D. Khalyavin
    • Jiaping Han
    • P. Q. Mantas

    Articles 01 November 2003 Pages: 2600 - 2607

14. Interface characteristics affecting electrical properties of Y-doped SiC

    • F. Siegelin
    • H-J. Kleebe
    • L. S. Sigl

    Articles 01 November 2003 Pages: 2608 - 2617

15. Island growth of Y₂BaCuO₅ nanoparticles in (211_{∼1.5 nm}/123_{∼10 nm})×N composite multilayer structures to enhance flux pinning of YBa₂Cu₃O_7−δ films

    • T. Haugan
    • P. N. Barnes
    • M. Sumption

    Articles 01 November 2003 Pages: 2618 - 2623

16. Effect of water/water vapor on microstructure and phase stability of (Y_0.25Bi_0.75)₂O₃ solid electrolytes

    • Chaur-Chi Huang
    • Kuan-Zong Fung

    Articles 01 November 2003 Pages: 2624 - 2632

17. Transmission electron microscopic studies on an initial stage in the conversion process from α-tricalcium phosphate to hydroxyapatite

    • Masato Tamai
    • Toshiyuki Isshiki
    • Hisamitsu Endoh

    Articles 01 November 2003 Pages: 2633 - 2638

18. Molecular orientation of methylene blue intercalated in layer-charge-controlled montmorillonites

    • Yoshiro Kaneko
    • Nobuo Iyi
    • Takektoshi Fujita

    Articles 01 November 2003 Pages: 2639 - 2643

19. Spatial and temporal spreading behaviors of light in glass particle-dispersed epoxy matrix composites evaluated by pico-second order light pulse profile

    • K. Matsumura
    • Y. Kagawa

    Articles 01 November 2003 Pages: 2644 - 2652

20. Characterization of the microstructure and phase equilibria calculations for the powder metallurgy superalloy IN100

    • Agnieszka M. Wusatowska-Sarnek
    • Gautam Ghosh
    • Mark Aindow

    Articles 01 November 2003 Pages: 2653 - 2663

21. Grain-growth kinetics of rutile TiO₂ nanocrystals under hydrothermal conditions

    • Guangshe Li
    • Liping Li
    • Brian F. Woodfield

    Articles 31 January 2011 Pages: 2664 - 2669

22. Carbon-coated titania nanostructured particles: Continuous, one-step flame-synthesis

    • Hendrik K. Kammler
    • Sotiris E. Pratsinis

    Articles 01 November 2003 Pages: 2670 - 2676

23. Crystallographic phases, phase transitions, and barrier layer formation in (1 − x) [Pb(Fe_1/2Nb_1/2)O₃]−xPbTiO₃

    • Satendra Pal Singh
    • Akhilesh Kumar Singh
    • Om Parkash

    Articles 01 November 2003 Pages: 2677 - 2687

24. Diffusion and isotope effect in bulk-metallic glass-forming Pd–Cu–Ni–P alloys from the glass to the equilibrium melt

    • Volker Zöllmer
    • Klaus Raätzke
    • Franz Faupel

    Articles 01 November 2003 Pages: 2688 - 2696

25. Effects of surface treatment on the adhesion of copper to a hybrid polymer material

    • J. Ge
    • M. P. K. Turunen
    • J. K. Kivilahti

    Articles 01 November 2003 Pages: 2697 - 2707

26. Influence of sulfur incorporation on field-emission properties of microcrystalline diamond thin films

    • S. Gupta
    • B. R. Weiner
    • G. Morell

    Articles 01 November 2003 Pages: 2708 - 2716

27. Analytic method for the minimum time for binder removal from three-dimensional porous green bodies

    • Stephen J. Lombardo
    • Z. C. Feng

    Articles 01 November 2003 Pages: 2717 - 2723

28. Thermal shock of porous silicon nitride with preferentially aligned grains

    • L. J. Vandeperre
    • Y. Inagaki
    • W. J. Clegg

    Articles 01 November 2003 Pages: 2724 - 2729

29. Structural characterization of the C₆₀[C(COOC₂H₅)₂] whiskers prepared by the liquid–liquid interfacial precipitation method

    • Kun’ichi Miyazawa
    • Tadahiko Mashino
    • Tadatomo Suga

    Articles 01 November 2003 Pages: 2730 - 2735