Articles

1. Machinability evaluation of magnesium composite using response surface methodology and nature-inspired metaheuristic algorithms

   • C. K. Dhinakarraj
   • N. Senthilkumar
   • B. Deepanraj

   Original Article 17 May 2024

   

2. Machine learning models for enhanced cutting temperature prediction in hard milling process

   • A. Balasuadhakar
   • S. Thirumalai Kumaran
   • M. Uthayakumar

   Original Article 17 May 2024

   

3. Microwave-enhanced In-Situ casting of Al-7075 Alloy: a comprehensive experimental and numerical investigation

   • Amit Meti
   • Neeraj Kumar Bhoi
   • Harpreet Singh

   Original Article 17 May 2024

   

4. Taguchi-Grey relational analysis driven multi-objective optimization of weld bead geometry and hardness in laser welded Ti6Al4V Alloy

   • Peter Omoniyi
   • Uttam Acharya
   • Esther Akinlabi

   Original Article Open access 17 May 2024

   

5. Investigation into the sound absorptivity of perforated panels with tapered hole geometries coupled with polyurethane foam

   • Chetan Patil
   • Ratnakar Ghorpade
   • Rajesh Askhedkar

   Original Article 17 May 2024

   

6. Optimization HW-GTAW process parameters in the joining of austenitic stainless steel with historic data design and zebra algorithm

   • M. R. Anantha Padmanaban
   • N. Baskar
   • M. Seeman

   Original Article 17 May 2024

   

7. Thermal analysis of v-cut twisted tape fitted heat exchanger: A numerical approach

   • Tushar T. Kapade
   • Sanjay K. Shah
   • Gurbhej Singh

   Original Article 15 May 2024

   

8. Assessing the efficacy of machine learning models in hydroxyapatite nano-powder assisted electro discharge machining of Ti-6Al-4 V Grade-5 alloy

   • Prince Jain
   • Ayanesh Joshi
   • Anand Joshi

   Original Article 15 May 2024

   

9. Design optimization of polymer composites for lower suspension arms of automotive vehicles

   • Farhaan Hussain
   • K. S.B. Manikanta
   • Shubhabrata Datta

   Original Article 15 May 2024

   

10. 2D-based optimization of closed die forging using the variable gutter technique and response surface methodology

    • Hamed Sheikhbahaee
    • S. Javid Mirahmadi

    Original Article 15 May 2024

    

11. Cutting force and surface roughness evaluation of cryogenic treated inserts for machining en24 grade alloy steel: RSM modelling approach

    • Prem Chand R
    • T. V. Sreerama Reddy
    • Raman Kumar

    Original Article 15 May 2024

    

12. Research on deep learning rolling bearing fault diagnosis driven by high-fidelity digital twins

    • Wu Jingyuan
    • Shu Qilin
    • Wei Yonghe

    Original Article 14 May 2024

    

13. Performance analysis and optimization of machining parameters using coated tungsten carbide cutting tool developed by novel S3P coating method

    • Sukhdev gangwar
    • Subhas Chandra Mondal
    • Ranjan Kumar Ghadai

    Original Article 10 May 2024

    

14. Machine learning in solid state additive manufacturing: state-of-the-art and future perspectives

    • Ashish Yadav
    • Manu Srivastava
    • Sandeep Rathee

    Review 10 May 2024

    

15. Multiphase CFD modelling of Head loss characteristics of Iron-Ore solid-liquid suspension flowing inside 90° pipe elbow section of slurry conveying system

    • Mandeep Singh
    • Satish Kumar
    • Jashanpreet Singh

    Original Article 09 May 2024

    

16. Design and analysis of a stairs-climbing military bot for efficient and stable movement on various terrains

    • Hitesh Arora
    • Prashun Das Gupta
    • Mohamed Abbas

    Original Article 09 May 2024

    

17. A simulation-based optimization evaluating process and feed system effect in plastic injection molding

    • Joshua M. Onyiego
    • James M. Wakiru
    • James N. Keraita

    Original Article 09 May 2024

    

18. Parametric optimization of hot pressing powder metallurgy process for improved toughness and microhardness of multilayered B₄C/AA7075 FGM

    • Mayank Chouhan
    • Lalit Thakur
    • Punit Kumar

    Original Article 07 May 2024

    

19. Enhancing mechanical properties of Ti-64 alloy through ECAE: lubricant optimization, microstructural evolution and optimal process parameters

    • Melwyn Rajesh Castelino
    • N. Mallikappa
    • James Valder

    Original Article 04 May 2024

    

20. Enhancing machining performance of Inconel 825 alloy using grey relation analysis and JAYA-TLBO optimization techniques

    • Anadh Gandhi
    • Soni Kumari
    • Sherzod Abdullaev

    Original Article 04 May 2024

    

21. Experiment and FEA simulation for predicting maximum distortion in the submerged arc welding process

    • Sumit Shoor
    • Rosy Shoor
    • Mohamed Abbas

    Original Article 04 May 2024

    

22. Tribological performance in micro-milling of Ti6Al4V under nanofluid-based minimum quantity lubrication

    • Jay Airao
    • Arpit Jain
    • Deepak Unune

    Original Article 03 May 2024

    

23. Boxless bus bar system for distribution boxes: a novel design for efficiency, security, and reliability

    • Ishant Jain

    Original Article 03 May 2024

    

24. Optimization of process parameters and predicting surface finish of PLA in additive manufacturing—a neural network approach

    • S. Panneer Selvan
    • D. Elil Raja
    • Tushar Sonar

    Original Article 03 May 2024

    

25. Failure mode and effects analysis of suction hose manufacturing industry: a case study of automobiles

    • Ahsan Razzaq
    • Tauseef Aized
    • Barno Sayfutdinovna Abdullaeva

    Original Article 03 May 2024

    

26. Welding strength prediction in nuts to sheets joints: machine learning and ANFIS comparative analysis

    • Bircan Albak
    • Caner Erden
    • Sinan Serdar Özkan

    Original Article 02 May 2024

    

27. Optimization of process parameters for improvement of joint strength of dissimilar aluminum alloys by friction stir welding with an activated flux of titanium diboride

    • Santha Rao Dakarapu
    • Sreenivasa Reddy Karri
    • Neelima Devi Chinta

    Original Article 02 May 2024

    

28. Application of cold spray technology in design and manufacturing of complex geometries

    • Amrinder Mehta
    • Hitesh Vasudev
    • Lalit Thakur

    Review 01 May 2024

    

29. Metaheuristic optimization and computational investigation of resistance spot welding process parameter employing Jaya, TLBO and Rao-II algorithm

    • Vinayak Gurav
    • Divya Shrivastava

    Original Article 30 April 2024

    

30. Experimental investigations and optimization of process parameters using COPRAS method during laser beam machining of Hardox-400 spur gears

    • D. Vijay Praveen
    • P. Umamaheswar Rao
    • K. Ganesh

    Original Article 30 April 2024

    

31. Design and experimental analysis of steerable Chebyshev bionic walking mechanism

    • Fei Lou
    • Jing Guan

    Original Article 29 April 2024

    

32. A review on energy efficiency techniques used in machining for combined generation units

    • Neslin H. Ocak
    • Ali Can

    Review 29 April 2024

    

33. Stability lobe and chatter prediction based on modified zeroth-order approximation in high-speed ball end milling process

    • Mithilesh K. Dikshit
    • Vimal Kumar Pathak

    Original Article 29 April 2024

    

34. Optimization of process parameters for minimizing the temperature field of high-speed milling of titanium alloy thin-walled parts

    • Jianping Liu
    • Changfu Liu
    • Daohai Wang

    Original Article 29 April 2024

    

35. Performance study of different numerical methods for modeling the vertical water entry of a wedge

    • K. S. Vepa
    • N. Seetharamaiah

    Original Article 29 April 2024

    

36. Multi-parametric optimization of convex spherical surface drilling of Ti6Al4V using finite element model and Taguchi coupled desirability function analysis

    • Arad Dehestany
    • Salman Pervaiz

    Original Article 29 April 2024

    

37. Synergistic interaction effects of process parameters on surface finish in two-way AFM of SS446

    • Gautam G. Krishna
    • N. Jinesh

    Original Article 27 April 2024

    

38. Hybrid intelligent algorithm and CAD secondary development technology in parameter optimization design of transmission gear set

    • Wei Zhang
    • Keqing Hou

    Original Article 26 April 2024

    

39. Thermo-electric modeling and analysis of lithium-ion battery pack for E-mobility

    • Mahipal Bukya
    • Rajesh Kumar
    • V Suryaprakash Reddy

    Original Article Open access 26 April 2024

    

40. Optimization of solid particle erosion behavior of thermally sprayed nichrome on duplex stainless steel

    • Roshan Kuruvila
    • S. Thirumalai Kumaran
    • Rendi Kurniawan

    Original Article 26 April 2024

    

41. Simulation and experimentation of centrifugal casting of functionally graded Al-B₄C composite

    • Rupesh Kumar Verma
    • Manoj Kumar Chopkar

    Original Article 25 April 2024

    

42. Parametric effect on mechanical, microstructural and corrosion behaviour of friction stir welded AA5083-AA7075 alloys

    • J. Ashok
    • A. V. S. S. Kumara Swami Gupta

    Original Article 25 April 2024

    

43. Electrochemical machining parameter optimization and prediction of performance using artificial neural network

    • K. Saranya
    • K. Haribabu
    • N. Rajan

    Original Article 25 April 2024

    

44. Image recognition technology and its application in the interactive design of commercial self-service robot

    • Chao Peng

    Original Article 25 April 2024

    

45. Experimental analysis and optimization of friction welding parameters for joining dissimilar materials through design of experiments

    • Pilli Neeraja
    • Ajit Kumar Senapati
    • Ravi Kumar Kottala

    Original Article 25 April 2024

    

46. Effect of conformal cooling design on residual stresses in injection molded parts

    • Laura W. Simiyu
    • James M. Mutua
    • Bernard W. Ikua

    Original Article 25 April 2024

    

47. Experimental study on cutting force in shear thickening polishing of hardened bearing steel

    • Thanh-Danh Lam
    • Truong-Giang Nguyen
    • Duc-nam Nguyen

    Original Article 24 April 2024

    

48. Accelerating the design of gerotor pumps using interactive tools and fast simulation

    • Juan Pareja-Corcho
    • Asier Pedrera-Busselo
    • Oscar Ruiz-Salguero

    Original Article 24 April 2024

    

49. A novel hybrid multi-criteria decision methodology for assessing tool materials in friction stir welding process

    • Anita Kumari
    • Bappa Acherjee

    Original Article 23 April 2024

    

50. Development stages of a number of electromechanical systems to establish a green additive remanufacturing ecosystem

    • Jake Officer
    • Ismail Fidan

    Original Article 22 April 2024