Collection
Role of Computing and Numerical Modelling in the sustainable Product Design and Development
- Submission status
- Closed
Editors
-
Hitesh Vasudev
Dr. Hitesh Vasudev is a Professor in the Mechanical Engineering Department at Lovely Professional University (LPU) in Phagwara, Punjab, India.
-
Raul Duarte Salgueiral Gomes Campilho
Dr. Raul Duarte Salgueiral Gomes Campilho is an accomplished researcher and educator in the field of Mechanical Engineering. He holds a Ph.D. in Mechanical Engineering (2009) and a Habilitation in Mechanical Engineering from the Faculty of Engineering at the University of Porto, Portugal. Currently, he serves as an auxiliary professor in the Mechanical Engineering department at ISEP – School of Engineering, Polytechnic University of Porto.
-
Sandeep Kumar
Dr. Sandeep Kumar is an Assistant Professor at Uttaranchal University in Dehradun, Uttarakhand, India. He holds a Ph.D. from Sardar Vallabhbhai Patel University of Agriculture.
Articles (53 in this collection)
-
-
Optimizing design and manufacturing processes with an effective algorithm using anti-collision enabled robot processor
Authors (first, second and last of 5)
- P. Madhumathy
- R. Saravanakumar
- Deepa Devasenapathy
- Content type: Original Article
- Published: 13 January 2024
-
Predictive modeling and optimization of dry turning of hardened steel
Authors (first, second and last of 5)
- Nitin Ambhore
- Mahendra Gaikwad
- Akshay Manikjade
- Content type: Original Paper
- Published: 25 November 2023
-
Finite element analysis of deformation mechanism of SiC reinforced 6061 aluminium-based metal matrix composites under compression
Authors (first, second and last of 5)
- Gianni D. Ambrosio
- A. Pramanik
- S. Shankar
- Content type: Original Paper
- Published: 14 November 2023
-
Application of computing in recognition of input design factors for vapour-grown carbon nanofibers through fuzzy cluster analysis
Authors (first, second and last of 5)
- Pooja Sangwan
- Rakesh Kumar
- C Durga Prasad
- Content type: Original Paper
- Published: 31 October 2023
-
Study on the photovoltaic panel using nano-CeO2/Water-based Nanofluid
Authors (first, second and last of 7)
- P. Manoj Kumar
- Radhey Shyam Meena
- Raviteja Surakasi
- Content type: Original Paper
- Published: 27 October 2023
-
Application of computing in data generation in molybdenum disulphide using fuzzy regression approach
Authors
- Mufala Khan
- Rakesh Kumar
- Yogita Sharma
- Content type: Original Paper
- Published: 27 October 2023
-
Finite element modeling and analysis of signal based localization of fatigue crack in active magnetic bearing supported shafts
Authors (first, second and last of 4)
- Nabam Teyi
- Sandeep Singh
- Lovi Raj Gupta
- Content type: Original Paper
- Published: 27 October 2023
-
Multi-response optimization in face milling of EN-31 steel using analytical hierarchy process-based GRA
Authors (first, second and last of 4)
- Vijay Kumar Sharma
- Abhineet Saini
- Satbir S. Sehgal
- Content type: Original Paper
- Published: 18 October 2023
-
Sustainable approach for dissimilar joining of austenitic (SS316L)-ferritic (SS-430) stainless steel using microwave energy
Authors
- D. S. Sahota
- Amit Bansal
- Vinod Kumar
- Content type: Original Paper
- Published: 17 October 2023
-
Topography analysis of non-Gaussian engineered rough surfaces
Authors
- Deepak K. Prajapati
- Chander Prakash
- Content type: Original Paper
- Published: 14 October 2023
-
Evaluating and optimizing surface roughness using genetic algorithm and artificial neural networks during turning of AISI 52100 steel
Authors (first, second and last of 7)
- G. Srinivasa Rao
- Usha Mukkamala
- K. Ch. KishoreKumar
- Content type: Original Paper
- Published: 14 October 2023
-
Identification and investigation into the barriers to Green Lean Six Sigma implementation: a micro small and medium enterprises perspective
Authors
- Jag Mohan
- Mahender Singh Kaswan
- Rajeev Rathi
- Content type: Original Paper
- Published: 14 October 2023
-
Design and modeling to identify a defective workpiece in manufacturing process: an industry 4.0 perspective
Authors (first, second and last of 8)
- Bhaveshkumar N. Pasi
- Pallavi V. Dongare
- Manoj Kumar
- Content type: Original Paper
- Published: 13 October 2023
-
Prediction of transient temperature at bit-rock interface using numerical modelling approach and optimization
Authors (first, second and last of 8)
- Vijay Kumar Shankar
- Avinash Lakshmikanthan
- Vinayak Malik
- Content type: Original Paper
- Published: 12 October 2023
-
Life cycle assessment of sustainable turning techniques for pure titanium alloy: a comparative analysis
Authors
- Santankumar Chaurasiya
- Gurraj Singh
- Content type: Original Paper
- Published: 11 October 2023
-
Adoption of industry 4.0 in different sectors: a structural review using natural language processing
Authors (first, second and last of 6)
- Shamneesh Sharma
- Arun Malik
- Jose Arturo Garza-Reyes
- Content type: Original Paper
- Published: 07 October 2023
-
Applications of numerical modelling techniques in thermal spray coatings: a comprehensive review
Authors
- Amrinder Mehta
- Hitesh Vasudev
- Lalit Thakur
- Content type: Review
- Published: 03 September 2023
-
Empirical analysis of success factors to implement lean-green practices in an Indian automotive manufacturing industry using ISM-MICMAC approach
Authors
- Arun Arora
- Mahipal Singh
- Vijay Kumar Singh
- Content type: Original Paper
- Published: 26 August 2023
-
Effects of machining parameters on dry turning operation of Nickel 200 alloy
Authors (first, second and last of 8)
- B. Sureshkumar
- G. Navaneethakrishnan
- V. V. Prajapati
- Content type: Original Paper
- Published: 10 August 2023
-
Design and modeling of graph theory approach based routing algorithm
Authors (first, second and last of 6)
- S. Sivasankar
- Deepa Devasenapathy
- Prince Rana
- Content type: Original Paper
- Published: 03 August 2023
-
Mathematical modeling for radial overcut on powder mixed micro-electrical discharge machining (μ-EDM) of TZM-molybdenum superalloy by response surface methodology
Authors (first, second and last of 6)
- Kapil Surani
- Shailesh Patel
- Yogita Sharma
- Content type: Original Paper
- Published: 20 July 2023
-
An analysis of hurdles for ecofriendly lean production in Indian manufacturing industries using AHP–ELECTRE approach
Authors
- Arun Arora
- Vijay Kumar Singh
- Mahipal Singh
- Content type: Original Paper
- Published: 19 July 2023
-
Analysis and optimization of welding techniques for austenitic stainless steel using grey relational analysis
Authors (first, second and last of 4)
- Prashant Kumar Pandey
- Mahipal Singh
- Jagesvar Verma
- Content type: Original Paper
- Published: 18 July 2023
-
Design and numerical analysis of tensile deformation and fracture properties of induction hardened inconel 718 superalloy for gas turbine applications
Authors (first, second and last of 8)
- Mohammed Asif Kattimani
- P R Venkatesh
- Hitesh Vasudev
- Content type: Original Paper
- Published: 12 July 2023
-
Design of water distribution pipes alongside modeling and simulation of water distribution system for efficient management
Authors (first, second and last of 8)
- Ramakunj Kumar
- Bipin Kumar Singh
- Manoj Kumar Agarwal
- Content type: Technical Article
- Published: 12 July 2023
-
Study on wear analysis of Ni-20Al2O3 HVOF micron layers using artificial neural network technique
Authors (first, second and last of 4)
- Jashanpreet Singh
- Hitesh Vasudev
- Mohd Ubaidullah
- Content type: Original Paper
- Published: 10 July 2023
-
Experimental and numerical investigation of metal oxide base nano particles for VCRS test rig
Authors (first, second and last of 7)
- Arvind Kumar Patel
- S. P. S. Rajput
- Iman Kareem Kadhim
- Content type: Original Paper
- Published: 01 July 2023
-
Design and optimization of polyvinyl-nitride rubber for tensile strength analysis
Authors (first, second and last of 6)
- Sudheer D. Kulkarni
- Manjunatha
- Hitesh Vasudev
- Content type: Original Paper
- Published: 21 June 2023
-
A review on the design and analysis for the application of Wear and corrosion resistance coatings
Authors (first, second and last of 4)
- Navdeep Singh
- Amrinder Mehta
- Partap Singh Samra
- Content type: Review
- Published: 14 June 2023
-
Design and modeling using finite element analysis for the sitting posture of computer users based on ergonomic perspective
Authors (first, second and last of 7)
- M. Math Mahantesh
- K. V. S. Rajeswara Rao
- Hitesh Vasudev
- Content type: Original Paper
- Published: 12 June 2023
-
Optimized deep neural network strategy for best parametric selection in fused deposition modelling
Authors
- Nitin N. Gotkhindikar
- Mahipal Singh
- Ravinder Kataria
- Content type: Original Paper
- Published: 11 June 2023
-
Numerical simulation of microchannel heat exchanger using CFD
Authors (first, second and last of 8)
- G. Anjaneya
- S. Sunil
- Hitesh Vasudev
- Content type: Original Paper
- Published: 06 June 2023
-
Design and investigating the inlet parameters on the performance of the Ranque-Hilsch vortex tube
Authors (first, second and last of 8)
- Abhishek Dasore
- B. Kiran Naik
- Nakul Gupta
- Content type: Original Paper
- Published: 05 June 2023
-
Role of numerical modelling and optimization in the manufacturing of boiler steel surfaces with coatings
Authors
- Jai Parkash
- Harminder Singh Saggu
- Hitesh Vasudev
- Content type: Original Paper
- Published: 22 May 2023
-
Review on computational fluid dynamics based analysis of surface erosion in hydraulic machinery
Authors
- Jashanpreet Singh
- Hitesh Vasudev
- Jasgurpreet Singh Chohan
- Content type: Review
- Published: 19 May 2023
-
Green synthesis of CuO/TiO2 nanocomposite based photo catalyst and its applications in treatment of waste water
Authors (first, second and last of 5)
- Sapna Bisht
- Manish Ghalwan
- Chander Prakash
- Content type: Original Paper
- Published: 16 May 2023
-
A review on parametric optimization of EDM process for nanocomposites machining: experimental and modelling approach
Authors (first, second and last of 8)
- Blessing Kudzai Matanda
- Vijay Patel
- Sandeep Kumar
- Content type: Review
- Published: 10 May 2023
-
Design and optimization the wear characteristics for Al7178/TiO2/B4C/FA central hybrid composite
Authors (first, second and last of 7)
- P. Anusha
- M. Naga Swapna Sri
- Kuldeep Kumar Saxena
- Content type: Original Paper
- Published: 06 May 2023
-
Analysis of friction stir welds using numerical modelling approach: a comprehensive review
Authors (first, second and last of 6)
- Yogita Sharma
- Amrinder Mehta
- Chander Prakash
- Content type: Review
- Published: 06 May 2023
-
Computational modelling for the manufacturing of solar-powered multifunctional agricultural robot
Authors (first, second and last of 8)
- Mohan Poojari
- Harish Hanumanthappa
- Hitesh Vasudev
- Content type: Original Paper
- Published: 25 April 2023
-
Optimization for achieving sustainability in low code development platform
Authors (first, second and last of 5)
- Vaishali S Phalake
- Shashank D Joshi
- Mayuri Molawade
- Content type: Original Paper
- Published: 21 April 2023
-
Review on testing facilities assisting in development of numerical models for erosion calculation in centrifugal slurry pumps
Authors
- Jashanpreet Singh
- Satish Kumar
- Harjot Singh Gill
- Content type: Review
- Published: 11 April 2023
-
Soft contact grasping and orientation control of a rigid object using multibond graph
Authors
- Rahul Rathee
- Anil Kumar Narwal
- Anand Vaz
- Content type: Original Paper
- Published: 09 April 2023
-
A framework to describe biological entities for bioinspiration
Authors
- Sunil Sharma
- Prabir Sarkar
- Content type: Original Paper
- Published: 08 April 2023
-
Computational optimization of shear wall location in a C-shaped reinforced concrete framed building for enhanced seismic performance
Authors
- Rajiv Banerjee
- J. B. Srivastava
- Nakul Gupta
- Content type: Original Paper
- Published: 07 April 2023
-
Role of sustainable manufacturing approach: microwave processing of materials
Authors
- Amrinder Mehta
- Hitesh Vasudev
- N. Jeyaprakash
- Content type: Review
- Published: 05 April 2023
-
Modeling and analysis of K15 hollow glass microballoons filled epoxy syntactic foam for lightweight structures
Authors (first, second and last of 7)
- Mukul Saxena
- Anuj Kumar Sharma
- Mayada Ahmed Abass
- Content type: Original Paper
- Published: 04 April 2023
-
Role of numerical modeling in predicting the oxidation behavior of thermal barrier coatings
Authors (first, second and last of 4)
- VV Satyavathi Yedida
- Amrinder Mehta
- Sharanjit Singh
- Content type: Original Paper
- Published: 29 March 2023
-
Innovative and interactive methodology for development of geopolymer mortar using fly ash of agricultural waste briquettes
Authors (first, second and last of 5)
- Saurabh Sunil Naik
- Siddhartha Pandey
- Chander Prakash
- Content type: Original Paper
- Published: 23 March 2023