1. Degradation mechanism and flame retardancy of aluminum phosphonate in glass fiber-reinforced poly(butylene terephthalate)

   • Hai Vothi
   • Congtranh Nguyen
   • DongQuy Hoang

   Original Paper 09 November 2020 Pages: 6761 - 6776

   

2. Effect of waste fillers addition on properties of high-density polyethylene composites: mechanical properties, burning rate, and water absorption

   • S. Z. M. Rasib
   • M. Mariatti
   • H. Y. Atay

   Original Paper 10 November 2020 Pages: 6777 - 6795

   

3. Synthesis of novel aromatic polyamides containing cardo groups and triphenylphosphine oxide structures by a heterogeneous palladium-catalyzed carbonylation and condensation reaction

   • Li Wei
   • Huali Tang
   • Mingzhong Cai

   Original Paper 10 November 2020 Pages: 6797 - 6817

   

4. Development of waterborne polyurethane dispersions (WPUDs) from novel cardanol-based reactive dispersing agent

   • Siddhesh U. Mestry
   • Sonam P. Khuntia
   • S. T. Mhaske

   Original Paper 10 November 2020 Pages: 6819 - 6834

   

5. Correction to: Development of waterborne polyurethane dispersions (WPUDs) from novel cardanol‑based reactive dispersing agent

   • Siddhesh U. Mestry
   • Sonam P. Khuntia
   • S. T. Mhaske

   Correction 21 December 2020 Pages: 6835 - 6835

6. Effect of a small amount of poly(ethylene oxide) on crystal polymorphism of poly(l-lactic acid)

   • Yafei Wang
   • Lulu Liu
   • Changyu Shen

   Original Paper 12 November 2020 Pages: 6837 - 6846

   

7. High-performance gas separation using mixed-matrix composite membranes containing graphene nanoplatelets

   • Farhang Pazani
   • Abdolreza Aroujalian

   Original Paper 12 November 2020 Pages: 6847 - 6866

   

8. A study on fracture toughness of nano-structured carbon black-filled epoxy composites

   • R. Dungani
   • I. Sumardi
   • Sulistyono

   Original Paper 12 November 2020 Pages: 6867 - 6885

   

9. Eco-friendly green alternative binder for asphalt from waste oil and waste polymer

   • Ibrahim M. Nassar
   • Ramy M. Abdel-monem
   • A. A. Ragab

   Original Paper 12 November 2020 Pages: 6887 - 6909

   

10. Elucidating the plasticizing effect on mechanical and thermal properties of poly(lactic acid)/carbon nanotubes nanocomposites

    • H. Norazlina
    • Y. Kamal

    Original Paper 12 November 2020 Pages: 6911 - 6933

    

11. Experimental investigation of oligo cyclic compression behavior of pure epoxy and graphene-epoxy nanocomposites

    • Ozgen U. Colak
    • Deniz Uzunsoy
    • Charles Francart

    Original Paper 12 November 2020 Pages: 6935 - 6952

    

12. The effect of Cu-BTC metal–organic framework (MOF) in mixed matrix membranes on permeability and separation of carbon dioxide and methane

    • Hossein Asadi
    • Asghar Alizadehdakhel
    • Fatereh Dorosti

    Original Paper 12 November 2020 Pages: 6953 - 6968

    

13. Size-controlled in situ synthesis of metal–polymer nanocomposite films using a CO₂ laser

    • Kazuhiko Kashihara
    • Yuki Uto
    • Takashi Nakajima

    Original Paper 13 November 2020 Pages: 6969 - 6981

    

14. Poly(aniline-co-o-nitroaniline): transport properties using electrochemical impedance spectroscopy

    • Umesh S. Waware
    • Mohd Rashid
    • Rohana Adnan

    Original Paper 16 November 2020 Pages: 6983 - 6998

    

15. Fabrication, characterization, dielectric properties, thermal stability, flame retardancy and transport behavior of chlorinated nitrile rubber/hydroxyapatite nanocomposites

    • A. Nihmath
    • M. T. Ramesan

    Original Paper 16 November 2020 Pages: 6999 - 7018

    

16. Effect of gamma irradiation on thermal, mechanical and water absorption behavior of LLDPE hybrid composites reinforced with date pit (Phoenix dactylifera) and glass fiber

    • Kapil Gulati
    • Sohan Lal
    • Sanjiv Arora

    Original Paper 16 November 2020 Pages: 7019 - 7038

    

17. Poly(d,l lactic-co-glycolic) membranes seeded with human adipose stem cells for dermal substitute

    • Adriana Cristina Motta
    • Moema Hausen
    • Eliana Aparecida de Rezende Duek

    Original Paper 16 November 2020 Pages: 7039 - 7052

    

18. Selective separation of Y(III) from Sr(II) using hybrid polymer: synthesis, characterization, batch and column study

    • A. Massoud
    • H. E. Rizk
    • M. F. Attallah

    Original Paper 16 November 2020 Pages: 7053 - 7069

    

19. On the effects of high loading of ZnO nanofiller on the structural, optical, impedance and dielectric features of PVA@ZnO nanocomposite films

    • A. Muthupandeeswari
    • P. Kalyani
    • L. C. Nehru

    Original Paper 16 November 2020 Pages: 7071 - 7088

    

20. Eco-friendly synthesis of biodegradable poly(ε-caprolactone) using L-lactic and glycolic acids as organic initiator

    • Wanich Limwanich
    • Puttinan Meepowpan
    • Winita Punyodom

    Original Paper 17 November 2020 Pages: 7089 - 7101

    

21. Composition-property relationship of polyurethane networks based on polycaprolactone diol

    • Ivan S. Stefanović
    • Jasna V. Džunuzović
    • Monika Dobrzyńska-Mizera

    Original Paper 17 November 2020 Pages: 7103 - 7128

    

22. Chemically copolymerized poly(2-chloroaniline-co-2-ethylaniline) as an anodic material in Li-ion batteries

    • S. Padmaja
    • Jhancy Mary Samuel

    Original Paper 17 November 2020 Pages: 7129 - 7146

    

23. Detailed investigation of the reinforcing effect of halloysite nanotubes-filled epoxidized natural rubber

    • Nabil Hayeemasae
    • Kamaruddin Waesateh
    • Nadras Othman

    Original Paper 17 November 2020 Pages: 7147 - 7166

    

24. Amendment the physicochemical properties of polycarbonate/polybutylene terephthalate blend by gamma-ray irradiation doses

    • M. F. Zaki
    • R. M. Radwan
    • A. M. Rashad

    Original Paper 17 November 2020 Pages: 7167 - 7182

    

25. High-strength and amphiphilic epoxidized soybean oil-modified poly(vinyl alcohol) hydrogels

    • Manxi Sun
    • Jianhui Qiu
    • Ji Lei

    Original Paper 18 November 2020 Pages: 7183 - 7198

    

26. Silk fibroin/collagen 3D scaffolds loaded with TiO₂ nanoparticles for skin tissue regeneration

    • Hamad Khalid
    • Haffsah Iqbal
    • Ather Farooq Khan

    Original Paper 18 November 2020 Pages: 7199 - 7218

    

27. Investigation of β-chitin extracted from cuttlefish: comparison with squid β-chitin

    • F. Arrouze
    • J. Desbrieres
    • A. Tolaimate

    Original Paper 18 November 2020 Pages: 7219 - 7239

    

28. In situ synthesis of silver nanoparticles on modified poly(ethylene terephthalate) fibers by grafting for obtaining versatile antimicrobial materials

    • Zehra Gün Gök
    • Ayşe Demiral
    • Mustafa Yiğitoğlu

    Original Paper 18 November 2020 Pages: 7241 - 7260

    

29. Swelling of biodegradable polymers for the production of nanocapsules and films with the incorporation of essential oils

    • Daniela De Conto
    • Venina dos Santos
    • Ruth Marlene Campomanes Santana

    Original Paper 19 November 2020 Pages: 7261 - 7278

    

30. Preparation, characterization and microhardness measurements of hybrid nanocomposites based on PMMA + P(VDF–TrFE) and graphene oxide

    • Rohan Sagar
    • M. S. Gaur
    • A. A. Rogachev

    Original Paper 19 November 2020 Pages: 7279 - 7300

    

31. Application of cesium hydroxide monohydrate for ring opening polymerization of monosubstituted oxiranes: characterization of synthesized polyether-diols

    • Zbigniew Grobelny
    • Justyna Jurek-Suliga
    • Sylwia Golba

    Original Paper Open access 19 November 2020 Pages: 7301 - 7312

    

32. Squid pen chitosan nanoparticles: small size and high antibacterial activity

    • Nguyen Van Hoa
    • Nguyen Thi Hong Vuong
    • Trang Si Trung

    Original Paper 19 November 2020 Pages: 7313 - 7324

    

33. Antiproliferative effect of organoclay, poly(NCA) and their nanocomposites on HeLa cell line

    • Nevin Çankaya
    • Bahar Vurgun
    • Serap Yalçın

    Original Paper 19 November 2020 Pages: 7325 - 7335

    

34. Crystallization kinetics modeling, thermal properties and biodegradability of poly (ε-caprolactone)/niobium pentoxide and alumina compounds

    • Jokderléa C. Sousa
    • Anna Raffaela M. Costa
    • Yêda M. B. Almeida

    Original Paper 19 November 2020 Pages: 7337 - 7353

    

35. Synthesis and evaluation of some physical properties of epoxy methacrylate of bisphenol-C: a comparative study with commercial resin Aeropol-7105

    • P. H. Parsania
    • Ritesh D. Bhatt
    • Jignesh P. Patel

    Original Paper 20 November 2020 Pages: 7355 - 7367

    

36. The influence of freeze-thawing conditions on swelling and long-term stability properties of poly(vinyl alcohol) hydrogels for controlled drug release

    • F. Boran

    Original Paper 01 October 2021 Pages: 7369 - 7387