Skip to main content
SpringerLink
Log in

High-strength and amphiphilic epoxidized soybean oil-modified poly(vinyl alcohol) hydrogels

  • Original Paper
  • Published:
Polymer Bulletin Aims and scope Submit manuscript

Abstract

Poly(vinyl alcohol) (PVA) hydrogels are widely used as biomimetic cartilage materials for its good biocompatibility and shock absorbing ability. However, the application of pure PVA hydrogel prepared through freezing–thawing method is limited by its disadvantages such as high flexibility and low mechanical strength. To solve these barriers, a biobased monomer, i.e., epoxidized soybean oil (ESO), was used to modify PVA to formulate a series of ESO cross-linked PVA (PVA-ESO) hydrogels. Infrared spectroscopy (FT-IR), X-ray diffraction and thermogravimetric analyses were used to confirm the formation of PVA-ESO copolymer. Scanning electron microscope revealed that the formed PVA-ESO hydrogels presented a distinct porous structure, while no obvious pores were observed on pure PVA hydrogel. The tensile strength of PVA-ESO hydrogels increased up to 2.4 times when compared to that of pure PVA hydrogel. Dynamic mechanical analysis indicated that the elastic properties of PVA-ESO hydrogels are better than that of pure PVA hydrogel, which are similar to that of natural cartilage. In summary, the modification of PVA with ESO can improve the thermal stability and mechanical properties of the hydrogels due to the improved cross-linking degree and the formed hydrophobic association.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8

Similar content being viewed by others

References

  1. Reguieg F, Ricci L, Bouyacoub N, Belbachir M, Bertoldo M (2020) Thermal characterization by DSC and TGA analyses of PVA hydrogels with organic and sodium MMT. Polym Bull 77:929–948

    CAS  Google Scholar 

  2. Holloway JL, Lowman AM, Palmese GR (2013) The role of crystallization and phase separation in the formation of physically cross-linked PVA hydrogels. Soft Matter 9:826–833

    CAS  Google Scholar 

  3. Hasan A, Morshed M, Memic A, Hassan S, Webster TJ, Marei HE-S (2018) Nanoparticles in tissue engineering: applications, challenges and prospects. Int J Nanomed 13:5637–5655

    CAS  Google Scholar 

  4. Wang Y, Xue Y, Wang J, Zhu Y, Zhu Y, Zhang X, Liao J, Li X, Wu X, Qin Y-X, Chen W (2019) A composite hydrogel with high mechanical strength, fluorescence, and degradable behavior for bone tissue engineering. Polymers 11:1112

    CAS  PubMed Central  Google Scholar 

  5. Hassan CM, Peppas NA (2000) Structure and applications of poly(vinyl alcohol) hydrogels produced by conventional crosslinking or by freezing/thawing methods. Adv Polym Sci 2000:37–65

    Google Scholar 

  6. Hago E-E, Li X (2013) Interpenetrating polymer network hydrogels based on gelatin and PVA by biocompatible approaches: synthesis and characterization. Adv Mater Sci Eng 2013:328763

    Google Scholar 

  7. Pan Y, Ding J, Chen Y, Shen Q (2016) Study on mechanical and optical properties of poly(vinyl alcohol) hydrogel used as soft contact lens. Mater Technol 31:266–273

    CAS  Google Scholar 

  8. Shao L, Li Y, Ma Z, Bai Y, Wang J, Zeng P, Gong P, Shi F, Ji Zh, Qiao Y, Xu R, Xu J, Zhang G, Wang C, Ma J (2020) A highly sensitive strain sensor based on stretchable and conductive poly (vinyl alcohol)/phytic acid/NH2-POSS hydrogel with a 3D microporous structure. ACS Appl Mater Interfaces 12:26496–26508

    CAS  PubMed  Google Scholar 

  9. Luo X, Akram MY, Yuan Y, Nie J, Zhu X (2019) Silicon dioxide/poly (vinyl alcohol) composite hydrogels with high mechanical properties and low swellability. J Appl Polym Sci 136:46895

    Google Scholar 

  10. Sun Y, Xiang N, Jiang X, Hou L (2017) Preparation of high tough poly (vinyl alcohol) hydrogel by soaking in NaCl aqueous solution. Mater Lett 194:34–37

    CAS  Google Scholar 

  11. Li H, Wu C, Wang S, Zhang W (2020) Mechanically strong poly (vinyl alcohol) hydrogel with macropores and high porosity. Mater Lett 266:127504

    CAS  Google Scholar 

  12. Lin C, Liu Y, Xie X (2019) GO/PVA nanocomposites with significantly enhanced mechanical properties through metal ion coordination. Chin Chem Lett 30:1100–1104

    CAS  Google Scholar 

  13. Zhang Y, Song M, Diao Y, Li B, Shi L, Ran R (2016) Preparation and properties of polyacrylamide/polyvinyl alcohol physical double network hydrogel. RSC Adv 6:112468–112476

    CAS  Google Scholar 

  14. Rodríguez-Rodríguez R, García-Carvajal ZY, Jiménez-Palomar I, Jiménez-Avalos JA, Espinosa-Andrews H (2019) Development of gelatin/chitosan/PVA hydrogels: thermal stability, water state, viscoelasticity, and cytotoxicity assays. J Appl Polym Sci 136:47149

    Google Scholar 

  15. Kokabi M, Sirousazar M, Hassan ZM (2007) PVA–clay nanocomposite hydrogels for wound dressing. Eur Polym J 43:773–781

    CAS  Google Scholar 

  16. Liu T, Jiao C, Peng X, Chen Y-N, Chen Y, He C, Liu R, Wang H (2018) Super-strong and tough poly (vinyl alcohol)/poly (acrylic acid) hydrogels reinforced by hydrogen bonding. J Mater Chem B 6:8105–8114

    CAS  PubMed  Google Scholar 

  17. Xing L, Hu C, Zhang Y, Wang X, Shi L, Ran R (2019) A mechanically robust double-network hydrogel with high thermal responses via doping hydroxylated boron nitride nanosheets. J Mater Sci 54:3368–3382

    CAS  Google Scholar 

  18. Yahya GO, Asrof Ali SK, Hamad EZ (1996) Surface and interfacial activities of hydrophobically modified poly(vinyl alcohol) (PVA). Polymer 37:1183–1188

    CAS  Google Scholar 

  19. Andersen PO, Marstokk O, Nyström B, Walderhaug H (2001) Effects of Hydrophobic Modification and Electrostatic Interactions on the Association Behavior in Aqueous Solutions of Poly(vinyl alcohol). A Pulsed Field Gradient NMR Study. Macromol Chem Phys 202:1457–1465

    CAS  Google Scholar 

  20. Jiang H, Duan L, Ren X, Gao G (2019) Hydrophobic association hydrogels with excellent mechanical and self-healing properties. Eur Polym J 112:660–669

    CAS  Google Scholar 

  21. Li X, Su X (2018) Multifunctional smart hydrogels: potential in tissue engineering and cancer therapy. J Mater Chem B 6:4714–4730

    CAS  PubMed  Google Scholar 

  22. Hoffman AS (2012) Hydrogels for biomedical applications. Adv Drug Deliver Rev 64:18–23

    Google Scholar 

  23. Chen X, Taguchi T (2019) Hydrophobically modified poly(vinyl alcohol)s as antithrombogenic coating materials. Mater Sci Eng C 102:289–298

    CAS  Google Scholar 

  24. Tuncaboylu DC, Sari M, Oppermann W, Okay O (2011) Tough and Self-Healing Hydrogels Formed via Hydrophobic Interactions. Macromolecules 44:4997–5005

    CAS  Google Scholar 

  25. Tuncaboylu DC, Sahin M, Argun A, Oppermann W, Okay O (2012) Dynamics and Large Strain Behavior of Self-Healing Hydrogels with and without Surfactants. Macromolecules 45:1991–2000

    CAS  Google Scholar 

  26. Ren X, Huang C, Duan L, Liu B, Bu L, Guan S, Hou J, Zhang H, Gao G (2017) Super-tough, ultra-stretchable and strongly compressive hydrogels with core–shell latex particles inducing efficient aggregation of hydrophobic chains. Soft Matter 13:3352–3358

    CAS  PubMed  Google Scholar 

  27. Zhang C, Garrison TF, Madbouly SA, Kessler MR (2017) Recent advances in vegetable oil-based polymers and their composites. Prog Polym Sci 71:91–143

    CAS  Google Scholar 

  28. Stolp LJ, Gronlund PJ, Kodali DR (2019) Soybean oil fatty acid ester estolides as potential plasticizers. J Am Oil Chem Soc 96:727–738

    CAS  Google Scholar 

  29. Chelil O, Belhaneche-Bensemra N, Garcia DL, Fernandez-Garcia M, Benaniba MT (2019) Preparation of epoxidized sunflower oil metal soap derivatives and their use as heat stabilizers for polyvinyl chloride. Turk J Chem 43:582–593

    CAS  Google Scholar 

  30. Nakagawa K, Sowasod N, Tanthapanichakoon W, Charinpanitkul T (2013) Hydrogel based oil encapsulation for controlled release of curcumin by using a ternary system of chitosan, kappa-carrageenan, and carboxymethylcellulose sodium salt. LWT Food Sci Technol 54:600–605

    CAS  Google Scholar 

  31. Alehosseini A, Gomez del Pulgar E-M, Fabra MJ, Gómez-Mascaraque LG, Benítez-Páez A, Sarabi-Jamab M, Ghorani B, Lopez-Rubio A (2019) Agarose-based freeze-dried capsules prepared by the oil-induced biphasic hydrogel particle formation approach for the protection of sensitive probiotic bacteria. Food Hydrocolloid 87:487–496

    CAS  Google Scholar 

  32. Wang Z, Zhang X, Wang R, Kang H, Qiao B, Ma J, Zhang L, Wang H (2012) Synthesis and characterization of novel soybean-oil-based elastomers with favorable processability and tunable properties. Macromolecules 45:9010–9019

    CAS  Google Scholar 

  33. Ammar S, Iling AWM, Ramesh K, Ramesh S (2020) Development of fully organic coating system modified with epoxidized soybean oil with superior corrosion protection performance. Prog Org Coat 140:105523

    CAS  Google Scholar 

  34. Liu W, Qiu J, Zhu L, Fei M, Qiu R, Sakai E, Ito K, Song G, Tang G (2018) Tannic acid-induced crosslinking of epoxidized soybean oil for toughening poly (lactic acid) via dynamic vulcanization. Polymer 148:109–118

    CAS  Google Scholar 

  35. He W, Zhu G, Gao Y, Wu H, Fang Z, Guo K (2020) Green plasticizers derived from epoxidized soybean oil for poly (vinyl chloride): continuous synthesis and evaluation in PVC films. Chem Eng J 380:122532

    Google Scholar 

  36. Chen T, Wu Y, Qiu J, Fei M, Qiu R, Liu W (2020) Interfacial compatibilization via in situ polymerization of epoxidized soybean oil for bamboo fibers reinforced poly (lactic acid) biocomposites. Compos A Appl S 138:106066

    CAS  Google Scholar 

  37. Yang X, Li Z, Liu H, Ma L, Huang X, Cai Z, Xu X, Shang S, Song Z (2020) Cellulose-based polymeric emulsifier stabilized poly (N-vinylcaprolactam) hydrogel with temperature and pH responsiveness. Int J Biol Macromol 143:190–199

    CAS  PubMed  Google Scholar 

  38. Segal L, Creely JJ, Martin AE, Conrad CM (1959) An empirical method for estimating the degree of crystallinity of native cellulose using the x-ray diffractometer. Textile Res J 29:786–794

    CAS  Google Scholar 

  39. Guirguis OW, Moselhey MT (2012) Thermal and structural studies of poly (vinyl alcohol) and hydroxypropyl cellulose blends. Nat Sci 4:57–67

    CAS  Google Scholar 

  40. Ahn B-JK, Kraft S, Sun XS (2011) Chemical pathways of epoxidized and hydroxylated fatty acid methyl esters and triglycerides with phosphoric acid. J Mater Chem 21:9498–9505

    Google Scholar 

  41. Huang J, Jiang P, Wen Y, Deng J, He J (2016) Soy-castor oil based polyurethanes with octaphenylsilsesquioxanetetraol double-decker silsesquioxane in the main chains. RSC Adv 6:69521–69529

    CAS  Google Scholar 

  42. Gonzalez-Ortiz D, Pochat-Bohatier C, Gassara S, Cambedouzou J, Bechelany M, Miele P (2018) Development of novel h-BNNS/PVA porous membranes via Pickering emulsion templating. Green Chem 20:4319–4329

    CAS  Google Scholar 

  43. Rangel-Yagui CO, Pessoa A Jr, Tavares LC (2005) Micellar solubilization of drugs. J Pharm Pharm Sci 8:147–163

    CAS  PubMed  Google Scholar 

  44. Kwon GS, Kataoka K (1995) Block copolymer micelles as long-circulating drug vehicles. Adv Drug Deliv Rev 16:295–309

    CAS  Google Scholar 

  45. Zhu L, Liu Y, Jiang Z, Sakai E, Qiu J, Zhu P (2019) Highly temperature resistant cellulose nanofiber/polyvinyl alcohol hydrogel using aldehyde cellulose nanofiber as cross-linker. Cellulose 26:5291–5303

    CAS  Google Scholar 

  46. Krishnaswamy RK, Yang Q, Fernandez-Ballester L, Kornfield JA (2008) Effect of the distribution of short-chain branches on crystallization kinetics and mechanical properties of high-density polyethylene. Macromolecules 41:1693–1704

    CAS  Google Scholar 

  47. Tian Z, Chen K, Liu B, Luo N, Du W, Qian F (2015) Short-chain branching distribution oriented model development for Borstar bimodal polyethylene process and its correlation with product performance of slow crack growth. Chem Eng Sci 130:41–55

    CAS  Google Scholar 

  48. Wang J, Ye L (2012) Structure and properties of hydrophobic cationic poly(vinyl alcohol). Polym Int 61:571–580

    CAS  Google Scholar 

  49. Jiang L, Yang T, Peng L, Dan Y (2015) Acrylamide modified poly(vinyl alcohol): crystalline and enhanced water solubility. RSC Adv 5:86598–86605

    CAS  Google Scholar 

  50. Parhi R (2017) Cross-linked hydrogel for pharmaceutical applications: a review. Adv Pharm Bull 7:515–530

    CAS  PubMed  PubMed Central  Google Scholar 

  51. Slaughter BV, Khurshid SS, Fisher OZ, Khademhosseini A, Peppas NA (2009) Hydrogels in regenerative medicine. Adv Mater 21:3307–3329

    CAS  PubMed  PubMed Central  Google Scholar 

  52. Chen K, Liu J, Yang X, Zhang D (2017) Preparation, optimization and property of PVA-HA/PAA composite hydrogel. Mater Sci Eng C 78:520–529

    CAS  Google Scholar 

Download references

Acknowledgements

M. Sun would like to acknowledge the China Scholarship Council for her Ph.D. (No. 201708510090), and this work was supported by the Exploratory Challenging Research of Japan Society for the Promotion of Science (19K21923).

Author information

Authors and Affiliations

  1. Department of Machine Intelligence and Systems Engineering, Faculty of Systems Engineering, Akita Prefectural University, Akita, 015-0055, Japan

    Manxi Sun, Jianhui Qiu, Shuping Jin, Hongjian Huang & Eiichi Sakai

  2. College of Transportation and Civil Engineering, Fujian Agriculture and Forestry University, Fuzhou, 350108, People’s Republic of China

    Wendi Liu

  3. School of Food Bio-engineering, Xihua University, Chendu, 610039, People’s Republic of China

    Ji Lei

Authors
  1. Manxi Sun
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Jianhui Qiu
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Shuping Jin
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Hongjian Huang
    View author publications

    You can also search for this author in PubMed Google Scholar

  5. Wendi Liu
    View author publications

    You can also search for this author in PubMed Google Scholar

  6. Eiichi Sakai
    View author publications

    You can also search for this author in PubMed Google Scholar

  7. Ji Lei
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Jianhui Qiu.

Additional information

Publisher's Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Electronic supplementary material

Below is the link to the electronic supplementary material.

Supplementary material 1 (DOCX 1132 kb)

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Sun, M., Qiu, J., Jin, S. et al. High-strength and amphiphilic epoxidized soybean oil-modified poly(vinyl alcohol) hydrogels. Polym. Bull. 78, 7183–7198 (2021). https://doi.org/10.1007/s00289-020-03462-3

Download citation

  • Received:

  • Revised:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s00289-020-03462-3

Keywords

Search

Navigation