1. Comparison of ultrasonically enhanced pulsating water jet erosion efficiency on mechanical surface treatment on the surface of aluminum alloy and stainless steel

   • Dominika Lehocka
   • Jiri Klich
   • Michal Hatala

   ORIGINAL ARTICLE 09 April 2019 Pages: 1647 - 1656

2. Cutting energy consumption modelling for prismatic machining features

   • Lihui Wang
   • Yue Meng
   • Xianli Liu

   ORIGINAL ARTICLE 09 April 2019 Pages: 1657 - 1667

3. Enhancing formability of spherical bottom cylindrical parts with magnetic medium on deep drawing process

   • Yang Liu
   • Feng Li
   • Jie Xu

   ORIGINAL ARTICLE 09 April 2019 Pages: 1669 - 1679

4. Application of the cyclostationarity analysis in the detection of mechanical defects: comparative study

   • Mohamed Khemissi Babouri
   • Nouredine Ouelaa
   • Abderrazek Djebala

   ORIGINAL ARTICLE 09 April 2019 Pages: 1681 - 1699

5. Novel flame-retarded polyester composites using cow horn ash particles

   • E. M. Ezeh
   • O. D. Onukwuli
   • R. S. Odera

   ORIGINAL ARTICLE 10 April 2019 Pages: 1701 - 1707

6. High-throughput microstructure printing technology using inflatable thin membrane with microchannel

   • Mitsutoshi Makihata
   • Albert P. Pisano

   ORIGINAL ARTICLE 10 April 2019 Pages: 1709 - 1719

7. An advanced IoT system for assisting ubiquitous manufacturing with 3D printing

   • Toly Chen
   • Yu-Cheng Wang

   ORIGINAL ARTICLE 10 April 2019 Pages: 1721 - 1733

8. Optimization of mold temperature profile and process parameters for weld line reduction and short cycle time in rapid heat cycle molding

   • Satoshi Kitayama
   • Ryoto Ishizuki
   • Shuji Aiba

   ORIGINAL ARTICLE 11 April 2019 Pages: 1735 - 1744

9. Postprocessor algorithm and feedrate optimization for nine-axis milling machine tool with twin cutters

   • Dongdong Song
   • Fei Xue
   • Bingheng Lu

   ORIGINAL ARTICLE 11 April 2019 Pages: 1745 - 1757

10. Tool electrode wear compensation in block divided EDM process for improving accuracy of diffuser shaped film cooling holes

    • Wei Liang
    • Hao Tong
    • Baoquan Li

    ORIGINAL ARTICLE 11 April 2019 Pages: 1759 - 1767

11. Effect of scanning strategy and speed on the microstructure and mechanical properties of selective laser melted IN718 nickel-based superalloy

    • Mostafa Amirjan
    • Hassan Sakiani

    ORIGINAL ARTICLE 11 April 2019 Pages: 1769 - 1780

12. Mechanical evaluation of hybrid natural fibre–reinforced polymeric composites for automotive bumper beam: a review

    • O. T. Adesina
    • T. Jamiru
    • L. W. Beneke

    ORIGINAL ARTICLE 11 April 2019 Pages: 1781 - 1797

13. Reduction of tool tip vibration in single-point diamond turning using an eddy current damping effect

    • W. S. Yip
    • S. To

    ORIGINAL ARTICLE 11 April 2019 Pages: 1799 - 1809

14. Selection of an ideal MQL-assisted milling condition: an NSGA-II-coupled TOPSIS approach for improving machinability of Inconel 690

    • Binayak Sen
    • Syed Abou Iltaf Hussain
    • Sankar Prasad Mondal

    ORIGINAL ARTICLE 11 April 2019 Pages: 1811 - 1829

15. Development of a shaving die design for reducing rollover

    • Arkarapon Sontamino
    • Sutasn Thipprakmas

    ORIGINAL ARTICLE 11 April 2019 Pages: 1831 - 1845

16. Research on arc-shaped wheel wear and error compensation in arc envelope grinding

    • Shuo Lin
    • ZhenHua Jiang
    • YueHong Yin

    ORIGINAL ARTICLE 12 April 2019 Pages: 1847 - 1859

17. 5-axis grinding path generation for free-form surface based on plane instantaneous grinding engagements

    • Neng Wan
    • Chao Xia
    • Sentang Zhang

    ORIGINAL ARTICLE 12 April 2019 Pages: 1861 - 1877

18. Modeling of curved diamond wheel errors for improvement of freeform grinding accuracy

    • J. Y. Liao
    • J. Xie
    • J. X. Sun

    ORIGINAL ARTICLE 12 April 2019 Pages: 1879 - 1892

19. A numerical and experimental study of the compression uniaxial properties of PLA manufactured with FDM technology based on product specifications

    • Jorge Manuel Mercado-Colmenero
    • Miguel Angel Rubio-Paramio
    • Cristina Martin-Doñate

    ORIGINAL ARTICLE 13 April 2019 Pages: 1893 - 1909

20. Smooth flank milling tool path generation for blade surfaces considering geometric constraints

    • Yao-An Lu
    • Cheng-Yong Wang
    • Li-Juan Zheng

    ORIGINAL ARTICLE 13 April 2019 Pages: 1911 - 1923

21. Tool orientation optimization considering cutter deflection error caused by cutting force for multi-axis sculptured surface milling

    • Xianyin Duan
    • Fangyu Peng
    • Guozhang Jiang

    ORIGINAL ARTICLE 13 April 2019 Pages: 1925 - 1934

22. An assessment of the brazing performance of warm formed automotive heat exchangers

    • M. J. Benoit
    • K. B. Han
    • M. A. Wells

    ORIGINAL ARTICLE 13 April 2019 Pages: 1935 - 1946

    

23. Inverse analysis of the tool life in laser-assisted milling

    • Yixuan Feng
    • Tsung-Pin Hung
    • Steven Y. Liang

    ORIGINAL ARTICLE 13 April 2019 Pages: 1947 - 1958

    

24. Tribological evaluation of electroless Ni–B coating on metal-working tool steel

    • Jaime Taha-Tijerina
    • Karla Aviña-Camarena
    • Demófilo Maldonado-Cortes

    ORIGINAL ARTICLE 15 April 2019 Pages: 1959 - 1964

25. A stress-based topology optimization method by a Voronoi tessellation Additive Manufacturing oriented

    • Filippo Cucinotta
    • Marcello Raffaele
    • Fabio Salmeri

    ORIGINAL ARTICLE 16 April 2019 Pages: 1965 - 1975

26. A mechanistic prediction model of instantaneous cutting forces in drilling of carbon fiber-reinforced polymer

    • Qian Wang
    • Xiaoliang Jia
    • Wenqiang Xia

    ORIGINAL ARTICLE 16 April 2019 Pages: 1977 - 1988

27. Tool performance evaluation of friction stir welded shipbuilding grade DH36 steel butt joints

    • Avinish Tiwari
    • Pardeep Pankaj
    • A. Gourav Rao

    ORIGINAL ARTICLE 16 April 2019 Pages: 1989 - 2005

28. Influence of hole diameter, workpiece thickness, and tool surface condition on machinability of CFRP composites in orbital drilling: a case of workpiece rotation

    • Nazir Ahmad
    • Sarmad Ali Khan
    • Syed Farhan Raza

    ORIGINAL ARTICLE 16 April 2019 Pages: 2007 - 2015

    

29. A workpiece stability-based iterative planning of clamping forces for fixturing layout specification of a complex workpiece

    • Wang Huamin
    • Qin Guohua
    • Zuo Dunwen

    ORIGINAL ARTICLE 16 April 2019 Pages: 2017 - 2035

30. Magnetorheological nano-finishing of tube extrusion punch for improving its functional applications in press machine

    • Anirudh Chana
    • Anant Kumar Singh

    ORIGINAL ARTICLE 16 April 2019 Pages: 2037 - 2052

31. Optimizing the weld factors affecting ultrasonic welding of thermoplastics

    • Syed Farhan Raza
    • Sarmad Ali Khan
    • Mohammad Pervez Mughal

    ORIGINAL ARTICLE 16 April 2019 Pages: 2053 - 2067

32. A predictive model on surface roughness during internal traverse grinding of small holes

    • Hao Su
    • Changyong Yang
    • Wengfeng Ding

    ORIGINAL ARTICLE 16 April 2019 Pages: 2069 - 2077

33. Multipoint forming using mesh-type elastic cushion: modelling and experimentation

    • A. Tolipov
    • A. Elghawail
    • K. Essa

    ORIGINAL ARTICLE Open access 16 April 2019 Pages: 2079 - 2090

34. Prediction and comparison of high-cycle fatigue behavior of ultrasonic and conventional shot-peened parts

    • S. Manchoul
    • R. Seddik
    • R. Fathallah

    ORIGINAL ARTICLE 17 April 2019 Pages: 2091 - 2108

35. Effect of ultrasonic vibration on polishing monocrystalline silicon: surface quality and material removal rate

    • Tianbiao Yu
    • Zhihui Wang
    • Lijie Chen

    ORIGINAL ARTICLE 17 April 2019 Pages: 2109 - 2119

36. Towards aging in a multipass friction stir–processed АА2024

    • K. N. Kalashnikov
    • S. Yu. Tarasov
    • A. N. Ivanov

    ORIGINAL ARTICLE 17 April 2019 Pages: 2121 - 2132

37. An analysis method of cutting heat by transforming from time-varying variable to constant parameter for dry milling of TC4 curved surface

    • Jian-wei Ma
    • Wen-wen Jiang
    • Guang-zhi He

    ORIGINAL ARTICLE 17 April 2019 Pages: 2133 - 2150

38. Experimental study of metal ceramic (WC-Co) micro-tool fabrication by controlled inclined grinding (CIG)

    • Chunchun Gao
    • Jun Cheng
    • Jun Wu

    ORIGINAL ARTICLE 17 April 2019 Pages: 2151 - 2167

39. Effects of cooling time of molded parts on rapid injection molds with different layouts and surface roughness of conformal cooling channels

    • Chil-Chyuan Kuo
    • Zi-Fan Jiang
    • Jun-Hao Lee

    ORIGINAL ARTICLE 17 April 2019 Pages: 2169 - 2182

    

40. An advanced FE-modeling approach to improve the prediction in machining difficult-to-cut material

    • Bingxiao Peng
    • Thomas Bergs
    • Benjamin Döbbeler

    ORIGINAL ARTICLE 17 April 2019 Pages: 2183 - 2196

41. Analysis of the cooling performance of Ti–6Al–4V in minimum quantity lubricant milling with different nanoparticles

    • Lan Dong
    • Changhe Li
    • Lifang Li

    ORIGINAL ARTICLE 17 April 2019 Pages: 2197 - 2206

42. Mechanical properties and surface roughness assessment of outer and inner HDPE pipe layers after exposure to toluene methanol mixture

    • Wafia Ghabeche
    • Kamel Chaoui
    • Nassereddine Zeghib

    ORIGINAL ARTICLE 17 April 2019 Pages: 2207 - 2225

43. Densification behaviour and the effect of heat treatment on microstructure, and mechanical properties of sintered nickel-based alloys

    • Neo Kekana
    • Mxolisi B. Shongwe
    • Bukola J. Babalola

    ORIGINAL ARTICLE 17 April 2019 Pages: 2227 - 2233

    

44. Analytical and experimental investigation of the dynamic behavior of a revolute-prismatic manipulator with N flexible links and hubs

    • M. H. Korayem
    • S. F. Dehkordi
    • P. Monfared

    ORIGINAL ARTICLE 17 April 2019 Pages: 2235 - 2256

45. Use of acoustic emission and cutting force signals to monitor built-up edge formation in stainless steel turning

    • Yassmin Seid Ahmed
    • Md. Shafiul Alam
    • S. C. Veldhuis

    ORIGINAL ARTICLE 18 April 2019 Pages: 2257 - 2276

46. The effect of scan speed and hatch distance on prior-beta grain size in laser powder bed fused Ti-6Al-4V

    • D. F. Louw
    • P. G. H. Pistorius

    ORIGINAL ARTICLE 18 April 2019 Pages: 2277 - 2286

    

47. Investigation on the vibration and machined surface quality in tilt side milling of thin-walled plates

    • Gongyu Liu
    • Jiaqiang Dang
    • Ming Chen

    ORIGINAL ARTICLE 18 April 2019 Pages: 2287 - 2300

48. Research on discharge state detection of finishing in high-speed wire electrical discharge machine

    • Haihui Wu
    • Tong Wang
    • Junqi Wang

    ORIGINAL ARTICLE 18 April 2019 Pages: 2301 - 2317

    

49. Influence of welding parameters and tool geometry on the morphology and mechanical performance of ABS friction stir spot welds

    • Yinfei Yan
    • Yifu Shen
    • Junyi Zhuang

    ORIGINAL ARTICLE 18 April 2019 Pages: 2319 - 2330

    

50. Numerical and experimental investigation on grinding-induced exit burr formation

    • Gongyu Liu
    • Jiaqiang Dang
    • Qinglong An

    ORIGINAL ARTICLE 18 April 2019 Pages: 2331 - 2346