1. Transparent electrodes made from carbon nanotube polyelectrolytes and application to acidic environments

   • Amélie Catheline
   • Francesco Paolucci
   • Alain Pénicaud

   Invited Feature Paper 23 June 2015 Pages: 2009 - 2017

   

2. Effect of (Bi_0.5K_0.5)TiO₃ on the electrical properties, thermal and fatigue behavior of (K_0.5Na_0.5)NbO₃-based lead-free piezoelectrics

   • Jigong Hao
   • Zhijun Xu
   • Juan Du

   Article 23 June 2015 Pages: 2018 - 2029

   

3. Theoretical investigations on mechanical and thermal properties of MSiO₄ (M = Zr, Hf)

   • Huimin Xiang
   • Zhihai Feng
   • Yanchun Zhou

   Article 29 June 2015 Pages: 2030 - 2039

   

4. Fluorine-doped tin oxide films with a high figure of merit fabricated by spray pyrolysis

   • Oleksandr Malik
   • Francisco Javier De la Hidalga-Wade
   • Raquel Ramírez Amador

   Article 21 May 2015 Pages: 2040 - 2045

   

5. Evaluating indent pile-up with metallic films on ceramic-like substrates

   • MariAnne Sullivan
   • Barton C. Prorok

   Article 23 June 2015 Pages: 2046 - 2054

   

6. Analysis of thin films exhibiting large plastic deformation during nanoindentation: A modified Winkler approach

   • Benjamin Boesl
   • Gerald R. Bourne

   Article 23 June 2015 Pages: 2055 - 2063

   

7. Microstructure evolution during heat treatment of superalloys loaded with different amounts of carbon

   • Zhuhuan Yu
   • Junfeng Qiang
   • Lin Liu

   Article 26 May 2015 Pages: 2064 - 2072

   

8. Influence of cold deformation and Ti element on the microstructure and properties of Cu–Cr system alloys

   • Pengchao Zhang
   • Jinchuan Jie
   • Tingju Li

   Article 21 May 2015 Pages: 2073 - 2080

   

9. The effects of heating/cooling rate on the phase transformations and thermal expansion coefficient of C–Mn as-cast steel at elevated temperatures

   • Zhang Jian
   • Chen Deng-Fu
   • Han Ming-Rong

   Article 23 June 2015 Pages: 2081 - 2089

   

10. Processing maps and microstructural evolution of the type 347H austenitic heat-resistant stainless steel

    • Yinghui Zhou
    • Yongchang Liu
    • Baoqun Ning

    Article 23 June 2015 Pages: 2090 - 2100

    

11. Modulated martensite formation behavior in Fe–Ni-based alloys; athermal and thermally activated mechanisms

    • Sarah Loewy
    • Bastian Rheingans
    • Eric J. Mittemeijer

    Article 30 June 2015 Pages: 2101 - 2107

    

12. Microstructural characterization and wide temperature range mechanical properties of NiCrMoV steel welded joint with heavy section

    • Fenggui Lu
    • Xia Liu
    • Xin Huo

    Article 08 June 2015 Pages: 2108 - 2116

    

13. Nonequilibrium grain-boundary segregation mechanism of hot ductility loss for austenitic and ferritic stainless steels

    • Zhenjun Liu
    • Hongyao Yu
    • Tingdong Xu

    Article 08 June 2015 Pages: 2117 - 2123

    

14. Reversible transformation of NiGe in mechanically alloyed Ni–Ge powders

    • C. Suryanarayana
    • Ahmed Al-Joubori

    Article 08 June 2015 Pages: 2124 - 2132