Volume 10, Issue 3

Search all Journal of Petroleum Exploration and Production Technology articles

March 2020

32 articles in this issue

A comprehensive modeling in predicting the effect of various nanoparticles on filtration volume of water-based drilling fluids
Alireza Golsefatan
Khalil Shahbazi
Original Paper - Production Engineering Open access 11 September 2019 Pages: 859 - 870
The potential of using micro-sized crosslinked polymer gel to remediate water leakage in cement sheaths
Murad Abdulfarraj
Abdulmohsin Imqam
Original Paper - Production Engineering Open access 27 September 2019 Pages: 871 - 881
Subcritical CO₂ effects on kaolinite fines transport in porous limestone media
S. Mahalingam
Venkat Pranesh
T. Arun Selvakumar
Original Paper - Production Engineering Open access 22 July 2019 Pages: 883 - 891
An experimental investigation into enhancing oil recovery using combination of new green surfactant with smart water in oil-wet carbonate reservoir
Omid Mosalman Haghighi
Ali Mohsenatabar Firozjaii
Original Paper - Production Engineering Open access 23 July 2019 Pages: 893 - 901
Significant effect of compositional grading on SAGD performance in a fractured carbonate heavy oil reservoir
Hossein Ghalenavi
Saeid Norouzi-Apourvari
Mohammad Ranjbar
Original Paper - Production Engineering Open access 25 July 2019 Pages: 903 - 910
Anisotropy extraction using a deviated well in the Mahanadi Basin, East Coast of India
Biplab Kumar Mukherjee
G. Karthikeyan
Hari Srivastava
Review Paper - Exploration Geophysics Open access 11 September 2019 Pages: 911 - 918
An experimental investigation of asphaltene stability in heavy crude oil during carbon dioxide injection
Sherif Fakher
Mohamed Ahdaya
Abdulmohsin Imqam
Original Paper - Production Engineering Open access 25 September 2019 Pages: 919 - 931
Simulation of multiphase flow pattern, effective distance and filling ratio in hydraulic fracture
Yuxin Pei
Nanlin Zhang
Jinhong Zhang
Original Paper - Production Engineering Open access 23 November 2019 Pages: 933 - 942
Optimization of waterflooding performance by using finite volume-based flow diagnostics simulation
Hypp Renaud Niongui Boumi Mfoubat
Esther Itekile Zaky
Original Paper - Production Engineering Open access 28 November 2019 Pages: 943 - 957
Numerical modeling on drilling fluid and cutter design effect on drilling bit cutter thermal wear and breakdown
Ahmad Zhafran Ayop
Ahmad Zafri Bahruddin
Sia Chee Wee
Original Paper - Production Engineering Open access 11 October 2019 Pages: 959 - 968
AVO analysis aids in differentiation between false and true amplitude responses: a case study of El Mansoura field, onshore Nile Delta, Egypt
Mohamed Hussein
Ahmed Abu El-Ata
Mohamed El-Behiry
Original Paper - Exploration Geophysics Open access 27 November 2019 Pages: 969 - 989
Seismic reflection pattern and attribute analysis as a tool for defining reservoir architecture in ‘SABALO’ field, deepwater Niger Delta
Imoleayo Fashagba
Pius Enikanselu
Olabode Matthew
Original Paper - Production Geology Open access 27 November 2019 Pages: 991 - 1008
Application of seismic attribute analysis in fluvial seismic geomorphology
Shakhawat Hossain
Original Paper - Exploration Geophysics Open access 03 December 2019 Pages: 1009 - 1019
Pre-drill pore pressure prediction and safe well design on the top of Tulamura anticline, Tripura, India: a comparative study
Mohatsim Mahetaji
Jwngsar Brahma
Anirbid Sircar
Original Paper - Exploration Geophysics Open access 09 December 2019 Pages: 1021 - 1049
Pore pressure prediction using seismic velocity modeling: case study, Sefid-Zakhor gas field in Southern Iran
Zahra Bahmaei
Erfan Hosseini
Original Paper - Exploration Geophysics Open access 07 December 2019 Pages: 1051 - 1062
Investigation on the effect of changing rotary speed and weight bit on PCD cutter wear
A. M. Abdul-Rani
Khairiyah Ibrahim
M. N. Mat Asri
Original Paper - Exploration Engineering Open access 12 November 2019 Pages: 1063 - 1068
Evaluating the rheological property of Irvingia gabonensis and Abelmoschus esculentus as a substitute to conventional Pac-R on cutting carrying capacity and hole cleaning
K. K. Ihekoronye
N. C. Izuwa
R. C. Amaefula
Original Paper - Production Engineering Open access 07 November 2019 Pages: 1069 - 1079
Artificial neural network model for predicting the density of oil-based muds in high-temperature, high-pressure wells
Okorie E. Agwu
Julius U. Akpabio
Adewale Dosunmu
Original Paper - Production Engineering Open access 22 November 2019 Pages: 1081 - 1095
Enhancing the cement quality using polypropylene fiber
Salaheldin Elkatatny
Rahul Gajbhiye
Ahmed Abdulhamid Mahmoud
Original Paper - Production Engineering Open access 27 November 2019 Pages: 1097 - 1107
Experimental evaluation of partially hydrolyzed polyacrylamide and silica nanoparticles solutions for enhanced oil recovery
Upendra Singh Yadav
Harinandan Kumar
Anveshika Shanker
Original Paper - Production Engineering Open access 03 August 2019 Pages: 1109 - 1114
Nano-fluid viscosity screening and study of in situ foam pressure buildup at high-temperature high-pressure conditions
Mohammed Falalu Hamza
Hassan Soleimani
Abdelazeem Abbas Ahmad
Original Paper - Production Engineering Open access 08 August 2019 Pages: 1115 - 1126
Experimental study of the effects of acid microemulsion flooding to enhancement of oil recovery in carbonate reservoirs
Tereza Neuma de Castro Dantas
Andrey Costa de Oliveira
Pedro Tupã Pandava Aum
Original Paper - Production Engineering Open access 08 August 2019 Pages: 1127 - 1135
Investigating the application of reactive polymers in fluid loss control
Tony Trifunoski
Masood Mostofi
Original Paper - Exploration Engineering Open access 30 August 2019 Pages: 1137 - 1143
Experimental study of nanoparticles as catalyst in enhancing matrix acidizing for carbonate reservoir
Gomathi Selvaraj
Belladonna Maulianda
Aruvin Prakasan
Original Paper - Production Engineering Open access 28 May 2019 Pages: 1145 - 1153
Rapid screening of oil-rim reservoirs for development and management
Kazeem A. Lawal
Asekhame U. Yadua
Olugbenga Olamigoke
Original Paper - Production Engineering Open access 02 December 2019 Pages: 1155 - 1168
An assessment of hydrates inhibition in deepwater production systems using low-dosage hydrate inhibitor and monoethylene glycol
Ndubuisi U. Okereke
Pius E. Edet
Onyebuchi Nwanwe
Original Paper - Production Engineering Open access 30 November 2019 Pages: 1169 - 1182
Critical review of asphaltene properties and factors impacting its stability in crude oil
Sherif Fakher
Mohamed Ahdaya
Abdulmohsin Imqam
Review Paper - Production Engineering Open access 05 December 2019 Pages: 1183 - 1200
Petrophysical interpretation in shaly sand formation of a gas field in Tanzania
Oras Joseph Mkinga
Erik Skogen
Jon Kleppe
Original Paper - Production Geophysics Open access 13 December 2019 Pages: 1201 - 1213
Experimental study of Zubair shale stability of east Baghdad oil field using different additives in water based mud
Asawer A. Alwassiti
Mayssaa Ali AL-Bidry
Khalid Mohammed
Original Paper - Production Engineering Open access 16 December 2019 Pages: 1215 - 1225
Transition zones analysis using empirical capillary pressure model from well logs and 3D seismic data on ‘Stephs’ field, onshore, Niger Delta, Nigeria
O. Abiola
F. O. Obasuyi
Original Paper - Exploration Geophysics Open access 06 December 2019 Pages: 1227 - 1242
Treatment of drill cuttings using microemulsion
Tereza Neuma de Castro Dantas
Daniel Nobre Nunes da Silva
Aécia Seleide Dantas dos Anjos
Original Paper - Exploration Engineering Open access 30 November 2019 Pages: 1243 - 1251
The effect of drill–pipe rotation on improving hole cleaning using polypropylene beads in water-based mud at different hole angles
A. Katende
B. Segar
A. Samsuri
Original Paper - Production Engineering Open access 05 December 2019 Pages: 1253 - 1262

Volume 10, Issue 3

A comprehensive modeling in predicting the effect of various nanoparticles on filtration volume of water-based drilling fluids

The potential of using micro-sized crosslinked polymer gel to remediate water leakage in cement sheaths

Subcritical CO₂ effects on kaolinite fines transport in porous limestone media

An experimental investigation into enhancing oil recovery using combination of new green surfactant with smart water in oil-wet carbonate reservoir

Significant effect of compositional grading on SAGD performance in a fractured carbonate heavy oil reservoir

Anisotropy extraction using a deviated well in the Mahanadi Basin, East Coast of India

An experimental investigation of asphaltene stability in heavy crude oil during carbon dioxide injection

Simulation of multiphase flow pattern, effective distance and filling ratio in hydraulic fracture

Optimization of waterflooding performance by using finite volume-based flow diagnostics simulation

Numerical modeling on drilling fluid and cutter design effect on drilling bit cutter thermal wear and breakdown

AVO analysis aids in differentiation between false and true amplitude responses: a case study of El Mansoura field, onshore Nile Delta, Egypt

Seismic reflection pattern and attribute analysis as a tool for defining reservoir architecture in ‘SABALO’ field, deepwater Niger Delta

Application of seismic attribute analysis in fluvial seismic geomorphology

Pre-drill pore pressure prediction and safe well design on the top of Tulamura anticline, Tripura, India: a comparative study

Pore pressure prediction using seismic velocity modeling: case study, Sefid-Zakhor gas field in Southern Iran

Investigation on the effect of changing rotary speed and weight bit on PCD cutter wear

Evaluating the rheological property of Irvingia gabonensis and Abelmoschus esculentus as a substitute to conventional Pac-R on cutting carrying capacity and hole cleaning

Artificial neural network model for predicting the density of oil-based muds in high-temperature, high-pressure wells

Enhancing the cement quality using polypropylene fiber

Experimental evaluation of partially hydrolyzed polyacrylamide and silica nanoparticles solutions for enhanced oil recovery

Nano-fluid viscosity screening and study of in situ foam pressure buildup at high-temperature high-pressure conditions

Experimental study of the effects of acid microemulsion flooding to enhancement of oil recovery in carbonate reservoirs

Investigating the application of reactive polymers in fluid loss control

Experimental study of nanoparticles as catalyst in enhancing matrix acidizing for carbonate reservoir

Rapid screening of oil-rim reservoirs for development and management

An assessment of hydrates inhibition in deepwater production systems using low-dosage hydrate inhibitor and monoethylene glycol

Critical review of asphaltene properties and factors impacting its stability in crude oil

Petrophysical interpretation in shaly sand formation of a gas field in Tanzania

Experimental study of Zubair shale stability of east Baghdad oil field using different additives in water based mud

Transition zones analysis using empirical capillary pressure model from well logs and 3D seismic data on ‘Stephs’ field, onshore, Niger Delta, Nigeria

Treatment of drill cuttings using microemulsion

The effect of drill–pipe rotation on improving hole cleaning using polypropylene beads in water-based mud at different hole angles

Navigation