1. Characteristics of electrochemical reactions accompanying chlorinating annealing of copper sulfide concentrates

   • A. S. Medvedev
   • So Tu

   Metallurgy of Nonferrous Metals 14 March 2013 Pages: 1 - 4

2. Sorptive technology of extracting nonferrous metals from pit water

   • K. L. Timofeev
   • S. S. Naboychenko
   • L. F. Akulich

   Metallurgy of Nonferrous Metals 14 March 2013 Pages: 5 - 7

3. Effective regime of microarc oxidation (MAO) on AZ 91 magnesium alloy

   • A. G. Rakoch
   • A. Nominè
   • I. V. Bardin

   Metallurgy of Nonferrous Metals 14 March 2013 Pages: 8 - 12

4. Investigation into regularities of phase transitions during the low-temperature reduction of Khibini titanium-magnetite concentrate

   • A. M. Pupyshev
   • I. O. Popov
   • B. N. Butyrskii

   Metallurgy of Nonferrous Metals 14 March 2013 Pages: 13 - 17

5. Studying the recovery of magnesium from serpentinite with a hydrochloric acid solution

   • D. V. Kirichenko
   • V. A. Tolkachev

   Metallurgy of Nonferrous Metals 14 March 2013 Pages: 18 - 21

6. Dusts and slimes of steel-smelting aggregates as the raw material for zinc and steel production

   • I. E. Doronin
   • A. G. Svyazhin

   Metallurgy of Nonferrous Metals 14 March 2013 Pages: 22 - 25

7. Potentialities of using a mechanical activator for improving rheological properties of pitch-dust compositions

   • E. D. Kravtsova
   • V. K. Frizorger
   • M. N. Kravtsova

   Metallurgy of Nonferrous Metals 14 March 2013 Pages: 26 - 29

8. A combined method of processing high-silicon bauxites (Partially Lateritized Condalites)

   • S. S. Kirov
   • I. V. Nikolaev
   • L. O. Magazina

   Metallurgy of Nonferrous Metals 14 March 2013 Pages: 30 - 37

9. Study of extraction of indium by molten salts from metal waste

   • V. E. D’yakov

   Metallurgy of Rare and Noble Metals 14 March 2013 Pages: 38 - 42

10. Investigating crystallization processes while brazing copper by copper-phosphorus brazing alloy with the purpose of controlling the structure of the brased seam

    • V. E. Bazhenov
    • I. N. Pashkov
    • M. V. Pikunov

    Foundry 14 March 2013 Pages: 43 - 47

11. Study of casting and mechanical properties of the AK8L alloy in castings fabricated using printed molds made of the ZCAST mixture

    • V. V. Drokina
    • V. D. Belov

    Foundry 14 March 2013 Pages: 48 - 50

12. Development of the crystallization method for removing lead impurity from secondary zinc

    • E. A. Shan’gin

    Foundry 14 March 2013 Pages: 51 - 55

13. Structure and mechanical characteristics of preliminarily deformed welded joints of the 40KKhNM alloy

    • A. N. Gushchin

    Physical Metallurgy and Heat Treatment 14 March 2013 Pages: 56 - 61

14. Thermal analysis and electron probe microanalysis of the AK6 aluminum alloy

    • P. L. Reznik
    • V. M. Zamyatin
    • V. S. Mushnikov

    Physical Metallurgy and Heat Treatment 14 March 2013 Pages: 62 - 65

15. Comparison of different methods to correct the matrix of geometrical angular radiation coefficients

    • I. A. Levitskii
    • N. V. Tikhomirova

    Energy Saving and Environmental Protection 14 March 2013 Pages: 66 - 69

16. Numerical investigation of heat setting of PAN bundles in the VULON furnace

    • A. S. Isaev
    • I. A. Levitskii
    • G. S. Sborshchikov

    Energy Saving and Environmental Protection 14 March 2013 Pages: 70 - 75

17. Reduction of emission of resinous substances during the electrolytic production of aluminum

    • S. G. Shakhrai
    • V. V. Korostovenko

    Nergy Saving and Environmental Protection 14 March 2013 Pages: 76 - 78

18. Preparation technology of carbide steels

    • L. I. Svistun
    • D. V. Dmitrenko
    • T. M. Pavlygo

    Production Processes and Properties of Powders 14 March 2013 Pages: 79 - 84

19. Investigating the surface of particles of ultradispersed copper powders obtained by gas-phase condensation

    • L. V. Zolotukhina
    • M. V. Kuznetsov
    • I. G. Aref’ev

    Production Processes and Properties of Powders 14 March 2013 Pages: 85 - 92

20. Size characteristics of copper nanopowders before and after oxidation

    • E. N. Sidorova
    • A. V. Samokhin
    • N. F. Korovkina

    Production Processes and Properties of Powders 14 March 2013 Pages: 93 - 97

21. Character of porosity of compact materials obtained from metalorganics

    • V. S. Levchenko
    • A. S. Plotnikov
    • E. V. Bogatyreva

    Porous Materials and Biomaterials 14 March 2013 Pages: 98 - 103

22. The effect of aging temperature on transformation parameters of porous NiTi shape memory alloy fabricated by SHS

    • Murat Eskil

    Porous Materials and Biomaterials 14 March 2013 Pages: 104 - 111

23. Modification of the structure of powder coatings on nickel and chromium-nickel bases by introducing nanoparticles of titanium diboride during electron-beam welding

    • I. V. Stepanova
    • S. V. Panin
    • M. A. Korchagin

    Modification of the Surface, Particularly by Beams of Charged Particles and Photon and Plasma Fluxes 14 March 2013 Pages: 112 - 117